• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.371-378
• /
• 2014

Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions ($2{\times}3{\times}3$). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.277-291
• /
• 2003

This study was designed to examine the kinematic factors in the phase during the marche fente motion. For this study, the subjects were 5 elite male fencing players. The direct linear transformation (DLT) method was used in calculating 3-D coordinate of the digitized body parts. The cubic spline function was used for smoothing and the kinematic data for displacement, velocity, angle variables were calculated for Kwon3d ver 2.1. And the following conclusions were drawn; 1. It show that the marche phase appeared to longer time than the pante phase In the performance time. For the fast attack, it showed that the subjects should be moving in a short stride width. 2. For a fast and stable movement posture in the marche phase, the vertical change of COG must be maintain the same position as possible, but all subjects appeared to decrease the COG because of a excessive the knee flection. 3. In the COG velocity change, all the subjects showed to the same change in both the marche and the fente phase. However in the attack extremity velocity, it increased velocity in order of upper arm, fore arm, and hand in the marche phase, but it showed different velocity among each subjects at the moment of stabbing. So that in order to do effective stabbing, they have to extend their upper extremity max and do faster the distal segment than the proximal segment. 4. It showed to take a fast and stable movement, because some subjects showed the big anteroposterior angle of the trunk flexed max shoulder angle and elbow angle of their attack arm and the other upper extremity.

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.2
• /
• pp.102-106
• /
• 2010

Purpose: The results of the repair for the superior labrum lesions attaching at the superior glenoid have not been satisfactory in every cases. We wanted to analyze the shoulder MRI and the anatomical morphology and pattern of the superior glenoid at which the superior labrum attaches to get anatomical information helpful in treating the superior labrum. Materials and Methods: We analyzed the coronal images of the shoulder MRI of 108 cases taken at our hospital. Average age was 52 years (range, 17~71 years), 55 males and 53 females. On two coronal images behind the attachment of the long head of biceps that the repair of the SLAP was performed at, the length of the attachment of superior labrum and the angle of the supero-lateral glenoid were measured. Results: The average length of the attachment of superior labrum was $9.78{\pm}1.64\;mm$. The average length was $10.1{\pm}1.61mm$ in male, $9.43{\pm}1.6\;mm$ in female. The angle of the supero-lateral glenoid was $89.6{\pm}7.6$ degrees. Conclusion: The attachment of the superior labrum in coronal plane was shorter in posterior spot than anterior. The angle of the supero-lateral glenoid was less in posterior spot.

• The Korean Journal of Emergency Medical Services
• /
• v.18 no.3
• /
• pp.7-18
• /
• 2014

Purpose: We aimed to investigate trunk angle and muscle activation of the extremity and back to evaluate the effect of chest compression on work-related musculoskeletal disorders in 119 emergency medical technicians (EMTs). Methods: Eighteen 119 EMTs performed 2-minute chest compression without interruption on a cardiopulmonary resuscitation manikin, during which we measured changes in the trunk and shoulder joint angles, muscle activation (triceps brachii, biceps brachii, erector spinae, gluteus maximus, pectoralis major, rectus abdominis, and rectus femoris) and chest compression accuracy. Results: The decrease in trunk angle by trunk muscle activation was the highest in event 2, the major direction of chest compression. Both shoulder joint angles had no significant difference. Muscle activation of the triceps brachii (p < .01), biceps brachii (p < .05), rectus abdominis (p < .05) and rectus femoris (p < .01) significantly increased during the compression phase compared with the decompression phase, with the rectus femoris showing an increase of 19%. Muscle activation of the erector spinae significantly increased in the decompression phase compared with the compression phase (p < .01). Conclusion: 119 EMTs mainly use the triceps brachii, biceps brachii and pectoralis major muscles during chest compression.

• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.156-160
• /
• 2019

The changes in the dispersion of carbon black in liquid polyisoprene under shear flow with time have been investigated by time-resolved ultra small-angle X-ray scattering (USAXS) method. The analyses of USAXS profile immediately after the start of shear flow clarified that the aggregates of carbon black with a mean radius of gyration of 14 nm and surface fractal dimension of 2.5 form the fractal network structure with mass-fractal dimension of 2.9. After the application of the shear flow, the scattering intensity increases with time at the observed whole entire q region, and then the a shoulder appears at $q=0.005nm^{-1}$, indicating that the agglomerate is broken and becomes smaller by shear flow. The analysis by the Unified Guinier/Power-law approach yielded several characteristic parameters, such as the sizes of aggregate and agglomerate, mass-fractal dimension of agglomerate, and surface fractal dimension of the primary particle. While the mean radius of gyration of the agglomerate decreases with time, the mean radius of gyration of the aggregate, mass fractal dimension, and surface fractal dimension don't change with time, indicating that the aggregates peel off the surface of the agglomerate.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.51-58
• /
• 2004

Objective: The purpose of this study is to report that D.I.T.I. can be used for diagnosis of scoliosis. Methods: We measured the posterior trunk surface of the patients with shoulder pain or low back pain. They were ruled out as scoliosis by D.I.T.I. and compared with X-ray finding of T L-spine Ap views and calculated scoliosis angle. Results: In according to the spinoprocess curve in D.I.T.I. we could rule out as scoliosis. Thermal difference of left and right segmental areas of the patients was showed. Scoliosis angle of the patients ranged from $4^{\circ}$ to $11^{\circ}$ in X-ray finding. Conclusions: The results suggest that D.I.T.I. can explain physiologic and functional abnormalities than X-ray, in diagnosis of scoliosis. But further studies are required to for the diagnosis of scoliosis by analysing D.I.T.I..

• Journal of Forest and Environmental Science
• /
• v.39 no.4
• /
• pp.254-260
• /
• 2023

A sensor system has been developed that uses an ultrasonic sensor to detect the downhill slope on the side of a forest road and prevents a vehicle-type forest machine from rolling down a mountainside. A specular reflection of ultrasonic wave might cause severe issues in measuring distances to targets. By investigating the installation angle of the sensor to minimize the negative effects of specular reflection, the installation angle of lateral monitoring ultrasonic sensor could be determined based on the width of road shoulder. Obstacles such as small rocks or piece of log in a forest road may cause the forest machine to be overturned while the machine riding over due to excessive its posture change. It was determined that the laser sensor could be a part of a sensor system capable of specifying the location and size of small obstacles. Not only this sensor system including ultrasonic and laser sensors can issue a warning of dangerous sections to drivers in forest forwarders currently in use, but also it can be used as a driving safety sensor in autonomous forest machine or remote-control forest machine in the future.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.229-238
• /
• 2014

This study comparatively analyzed the speed and segment coordination characteristics of Taekwondo hand techniques, while different attention focusing strategies were utilized. Ten elite Taekwondo poomsae athletes participated, and three different strategies (no focus, target focus, body focus) were utilized in random order. The hand velocity and upper body segment coordination characteristics were analyzed, with the following results. First, the maximum magnitudes of the hand velocity differed between the focus conditions for the Araenaereomakgi and Momtongjireugi techniques. Second, the angular velocity and kinetic energy transfer patterns of the segments differed between the focus conditions, and in the case of the body focus condition, the movement was more correct according to the theory. Third, the shoulder and elbow joint coordination patterns differed between the focus conditions, with more efficient movement shown with the body focus condition. In conclusion, we confirmed the potential of effectively using an attention focusing strategy in a taekwondo teaching situation. However, the effect on the movement coordination and results of the movement could be changed by a difference in the cue provided or the type of the task. In addition, depending on the task, the attention focusing strategy could affect the efficiency of the movement. Therefore, coaches and masters of Taekwondo will have to constitute determine the appropriate attention focusing cues based on the task.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.22-28
• /
• 2014

Most publications on friction stir welding describe phenomena or results with given process parameters like feed rate, rotation speed, angle and depth of penetration. But without a complete documentation of tool design, the results under the same process parameters are completely different. For this purpose, the Institute of Cutting and Joining Manufacturing Processes (tff), University of Kassel investigated the influence of tool roughness on the friction stir welding process. Therefore a defined surface finish was produced by turning and die sinking. As basis of comparison the constant parameters were rotation speed, feed rate, tilt angle and a heel plunge depth. Sound butt-welds were produced in aluminium alloy 6082 (AlMgSi1) with 1.5 mm sheet thickness with a turned reference tool with a surface of $Ra=0.575{\mu}m$ in position controlled mode. The surfaces are manufactured from a very fine to a very rough structure, classified by the VDI-classes with differences in the arithmetical mean roughness. It can be demonstrated with the help of temperature measures, that less heat is generated at the surfaces of the shoulder and the pin by the higher roughness due to lower active friction contact surface. This can also be seen in the resulting wormhole defects.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.175-183
• /
• 2005

This study investigates the kinetic characteristics of the Driggs motion in horse vaulting by stages through the three-dimensional video analysis of YTY and TABARA who won a high score and a low score respectively from the Driggs motion in horse vaulting during the Daegu Universiade 2003, which involves putting one's hands on the horse vaulting rotating sideways, stretching and rotating backward in the air, and twisting 900 degrees, so as to help develop the techniques of Korean gymnastic athletes. From the analyses of the duration of body center, horizontality, vertical position and horizontality, vertical speed and angle factors for each of four phases from the contact of the board to the takeoff from the horse vaulting. I arrived at the following conclusions: 1. It was found that the motion of bending oneself forward while rapidly stretching the knee joint when taking off from the board increases the horizontal speed of body center and shortens the time of the first jump. 2. It was found that S1 who won a high score shortened the time of the contact and takeoff from the horse vaulting and enlarged the shoulder joint angle for full blocking motion. It was also found that horizontal speed decreased while vertical speed increased when you rapidly stretch the right elbow joint while taking off from the horse vaulting. 3. It was found that horizontal distance was shortened to increase the height and time of staying in the air during the second jump.