• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.1-18
• /
• 1978

Three Pinus densiflora populations as shown in location map (Fig. 1) were studied in 1977. These succeed the population numbers 10, 11 and 12 after the preceeding populations. Following the previous study methods, 20 trees were chosen from each population and the morphological characteristics such as tree forms, branching habit, needle and wood properties were investigated. The results are summerized as follows; 1. The mean stand ages were ranged from 40 to 45. The growth performances of trees of population 10 and 11 was similar, but 12 seemed to be inferior more or less. 2. The ratios of clear bole length was 0.53 in population 12 as the highest but 0.43 for population 10 as the lowest. 3. The population 12 was considered to be a stand of the coarser branching habit having the crown index (The maximum crown diameter/the crown length) 1.65 though the mean branching angle indicates almost horizontal. 4. The differences were observed in the clear bole length ratios and crown-indices between populations as shown in Fig. 3 and 4. 5. No inter-population differences in serration density of needle was shown but significant inter and intra-population and individual differences (within population) in number of stomata rows and resin duct. 6. Population 12 shown 0.119 of resin duct index as the maximum. 7. The pattern of diameter growth, analyses based on the width of 10-year-ring segment unit (for example, the 1st segment denotes the width between pith center and 10th year ring and the 2nd one is from 11th to 20th year ring and so on.), was alike among populations as shown in Fig. 9. 8. No significant differences between population in mean summer wood percentages as well as in wood specific gravity was observed. The values of wood specific gravity were increased with the increase of ages in population 10 and 11 however vice versa in population 12. 9. The fiber length was increased with the increase of age but no differences between populations as shown in Fig. 12.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.691-699
• /
• 1997

In order to find out the properties in flow resistance of trawlR=1.5R=1.5\;S\;v^{1.8}\;S\;v^{1.8} nets and the exact expression for the resistance R (kg) under the water flow of velocity v(m/sec), the experimental data on R obtained by other, investigators were pigeonholed into the form of $R=kSv^2$, where $k(kg{\cdot}sec^2/m^4)$ was the resistance coefficient and $S(m^2)$ the wall area of nets, and then k was analyzed by the resistance formular obtained in the previous paper. The analyzation produced the coefficient k expressed as $$k=4.5(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ in case of bottom trawl nets and as $$k=5.1\lambda^{-0.1}(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ in midwater trawl nets, where $S_m(m^2)$ was the cross-sectional area of net mouths, $S_n(m^2)$ the area of nets projected to the plane perpendicular to the water flow and $\lambda$ the representitive size of nettings given by ${\pi}d^2/2/sin2\varphi$ (d : twine diameter, 2l: mesh size, $2\varphi$ : angle between two adjacent bars). The value of $S_n/S_m$ could be calculated from the cone-shaped bag nets equal in S with the trawl nets. In the ordinary trawl nets generalized in the method of design, however, the flow resistance R (kg) could be expressed as $$R=1.5\;S\;v^{1.8}$$ in bottom trawl nets and $$R=0.7\;S\;v^{1.8}$$ in midwater trawl nets.

• Journal of Animal Science and Technology
• /
• v.54 no.1
• /
• pp.51-58
• /
• 2012

The purposes of the study were to examine the changes in carcass traits and surface meat color, and cortisol concentration by different altitudes and shipping distances for steer and cow. The experimental animals were shipped from Kangwondo, Kyunggido, Choongchungdo, and Kyungsangdo to Wonju LPC. The animals were examined for yield traits, quality traits, carcass grade, lightness, redness, yellowness, croma value, and cortisol concentration by different altitudes and shipping distances. The results showed that the carcass traits of steer like back fat thickness were not different by shipping distances of 100 km, 150 km, and 200 km. However, the fat thickness was higher in steers shipped from 250 km than 100 km, 150 km, and 200 km distance. Ribeye area was reduced significantly in 200 km and 250 km than 50 km. Yield index and yield grade were significantly low in 250 km than 50-200 km. However, meat color, fat color, texture, mature, and quality grade had no differences between shipping distances. Marbling score was not different in 50-200 km. However, the marbling score in 250 km was significantly lower than that of 50 km. In case of surface meat color by shipping distance, redness, yellowness, chroma value, and hue-angle were not different in shipping distance of 250 km. The lightness had similar result in 50-200 km. However, in case of 250 km the lightness was significantly low. The REA of cow carcass by shipping distance had no differences by shipping distance. The BET had similar results in 50-150 km. However, it had significantly thick in 200 km. The yield index and yield grade had no differences in 50-150 km. However, yield index and grade were significantly low in 200 km. The carcass trait of cow had no differences in all items by shipping distance. Although the carcass traits and the BET for steer by altitude had no differences between 100, 200, 300 and 500 m, but those were significantly thick in 400 m. And the yield index and the yield grade at altitude 400 m were lower than that of other altitudes. The quality traits and the quality grade had no differences between 100, 200, 300, 400, and 500 m altitudes. The yield traits, quality traits, yield grade, and quality grade had no significant differences by altitudes. In case of yield index of cow for 300 m was low than the cases of 100 m and 200 m. The surface meat color for steer and cow had no differences by altitudes. However, the lightness of cow had positive result in 100 m than 200 m and 300 m. In case of steer and cow the cortisol concentration by shipping distance was high as the shipping distances were longer. However, the cortisol concentrations of steer and cow by altitudes were decreased as the altitudes were increased. From the above results carcass traits and carcass grade were decreased and the cortisol concentration was increased as the altitudes were decreased for steer and cow.

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.29-33
• /
• 2003

I. Purpose Brachytherapy is the main component in treatment of patients with uterine cervical cancer. The reproducibility of applicator position in the same patient at repeated treatments was very important for accurate dose delivery. It was aimed to evaluate the change of applicator location between each high dose rate(HDR) brachytherapy insertion in the patients with uterine cervical cancer. II. Materials and Methods From January 1999 to October 2001, total 52 patients were treated with external beam radiotherapy and HDR brachytherapy (Microselectron, Nucletron). During six to seven times of brachytherapy, all patients had three treatment plans. From the orthogonal radiographs, we measured the following variables; height from upper border of pubic bone to os (HPO), distance from sacral promontory to tip of tandem (DST), distance from coccyx to os (DCO), distance from tip of right ovoid to os (DRO), distance from tip of left ovoid to os (DLO), and distance from center of the first tandem source to ovoid (DTO). To evaluate the reproducibility of applicator position, it was calculated the standard deviation of differences between three insertions for the 7 parameters in each patient. III. Results The ranges of standard deviations of interfractional differences for the variables were as follows. 1)HPO : $0{\sim}0.79cm$ 2)DST : $0{\sim}0.9cm$ 3)DCO : $0.06{\sim}0.76cm$ 4)DRO : $0{\sim}0.53cm$ 5)DLO : $0{\sim}0.45cm$ 6) DTO $0{\sim}0.36cm$ IV. Conclusions There was some change in applicator position on repeated implants in our study. But variation of the interfractional differences was minimal; in all parameters, there were less than 1 cm. We are continued to try for reducing the geometric variation between each procedure.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.57-71
• /
• 2005

Purpose : To evaluate radiation dose and accuracy with TLD and diode detector when treat total skin with electron beam. Materials and Methods : Using Stanford Technique, we treated patient with Mycosis Fungoides. 6 MeV electron beam of LINAC was used and the SSD was 300 cm. Also, acrylic speller(0.8 cm) was used. The patient position was 6 types and the gantry angle was 64, 90 and $116^{\circ}$. The patient's skin dose and the output were detected 5 to 6 times with TLD and diode. Result : The deviations of dose detected with TLD from tumor dose were CA $+\;6\%$, thigh $+\;8\%$, umbilicus $+\;4\%$, calf $-\;8\%$, vertex $-\;74.4\%$, deep axillae $-\;10.2\%$, anus and testis $-\;87\%$, sole $-\;86\%$ and nails shielded with 4mm lead $+4\%$. The deviations of dose detected with diode were $-4.5\%{\sim}+5\%$ at the patient center and $-1.1\%{\sim}+1\%$ at the speller. Conclusion : The deviation of total skin dose was $+\;8\%{\sim}-\;8\%$ and that deviation was within the acceptable range(${\pm}\;10\%$). The boost dose was irradiated for the low dose areas(vertex, anus, sole). The electron beam output detected at the sootier was stable. It is thought that the deviation of dose at patient center detected with diode was induced by detection point and patient position.

• Korean Journal of Poultry Science
• /
• v.15 no.1
• /
• pp.1-19
• /
• 1988

A study was carried out to investigate meat production ability of Korean native Ogol fowl (Natural Monument No, 265). The aims of this study were to provide basal data necessary for preserve of purebred and improvement of meat production ability of this breed. A total 300 chickens were used in this study. All the chickens were ad libitum fed broiler starter during period from 0 to 4 weeks of age and broiler finisher during period from 5 to 16 weeks of age. The investigated items are as follows; body weight; growth rate: weight of edible end inedible parts; and body shape components. The results obtained are summarized as follows. 1. Average body weight in male, female, and unsexed, of native Ogol fowls were $659.0{\pm}154.9$, $588.3{\pm}68.0$ and $623.7{\pm}121.9$ at 8 weeks of age, and $938.1{\pm}72.6$, $810{\pm}104.4$ and $874.1{\pm}109.4$g at 10 weeks of age, respectively. 2. The growth rates, unsexed, during periods 2~4, 4~6, 6~8 and 8~10 weeks of age were 166, 106, 41 and 40%, respectively. 3. The growth pattern of total edible parts in both sexes were highly significant by weeks. Total weight of edible parts in male and female were $395.4{\pm}$ and $355.6{\pm}42.0$g at 8 weeks of age, $597.5{\pm}$47.2 and $518.7{\pm}98.5$69.7g at 10 weeks of age. Percentage of total edible parts, unsexed, were 60~63% of body weight during periods from 8 to 10 weeks of age. 4. Edible giblet, unsexed, at age of 8 and 10 weeks were 4~6% of body weight. 5. Percentage of body weight of inedible part were on the decreased by weeks. The amount of blood blooded, feather plucked, inedible viscera and total inedible parts, unsexed, at 8 weeks of age were 4, 7, 12 and 31% of live body weight, respectively. 6. Except breast angle and shank diameter, the other body shape components significantly grew from 2 to 10 weeks of age. Different between male and female at 8 weeks of age were significant in breast girth, keel length, drumstick girth and shank diameter. 7. In both sexes, highly significant differences were found in the correlation coefficients between live body weight and several other body shape component, i. e., breast girth, drumstick girth, and edible part.

• Journal of Science Education
• /
• v.38 no.3
• /
• pp.641-656
• /
• 2014

This study aimed at analyzing visual materials included in school science textbooks, specifically the textbooks for first semester courses of 3rd to 6th graders. The purpose was to provide directions for future textbooks by understanding the functions of the images in both pedagogical and social perspectives as well. The study was conducted by investigating the types, roles and socio-semiotic features of the images in science textbooks. The results were as follows. Firstly, the most used types of images in 2007 curriculum textbooks were photographs and drawn pictures. Uses of other visual aids than above were extremely rare. It was also found that as the educational level rises, the use of images for decorative functions drastically declined. The majority of the images were used in providing supplementary explanations or examples. This implies that the images effectively play the role of helping science education. In addition, more use of worksheets images was found, indicating that as educational level increases, students participate more actively in research sessions or data analysis. In socio-semiotic perspective, visual images showed high accessibility to students in 'Type of visual image', 'Function of visual image', 'Distance of shot', 'Horizontal angle of shot', 'Color moduation'. It was implied that there will a close correlation between the type, role and the socio-semiotic characteristics of visual images in textbooks. For example, photograph-type visuals were mostly used as supplementary references. And when applying the socio-semiotic analysis to photograph-type visuals, they showed 'real type', 'narrative-metaphor type', and 'shadow effect' among socio-semiotic features. Such correlations implied that knowing the type of the visual image may help determining the role of the image in the textbook to some extent, and also corresponding socio-semiotic characteristics. As a result, it was possible to infer how accessible certain visual images are to students. The above results have implications for the effective use of visual images in future textbooks.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.74-80
• /
• 2001

Purpose : Irradiation cones by using backscatter electrons are made for the treatment of superficial small lesions of skin, oral cavity, and rectum where a significant dose gradient and maximum surface dose is desired. Methods and Materials : Backscatter electrons are produced from the primary electron beams from the linear accelerators. The design consists of a cylindrical cone that has a thick circular plate of high atomic number medium (Pb or Cu) attached to the distal end, and the plate can be adjusted the reflected angle. Primary electrons strike the metal plate perpendicularly and produce backscatter electrons that reflect through the lateral hole for treatment. Using film and a parallel plate ion chamber, backscatter electron dose characteristics are measured. Results : The depth dose characteristic of the backscatter electron is very similar to that of the hard x-ray beam that is commonly used for the intracavitary and superficial lesions. The basckscatter electron energy is nearly constant and effectively about 1.5 MeV from the clinical megavoltage beams. The backscatter electron dose rate of $35\~85\;cGy/min$ could be achieved from modern accelerators without any modification. and the depth in water of $50\%$ depth dose from backscatter electron located at 6mm for $45^{\circ}$ angled lead scatter. The beam flatness is dependent on the slit size and the depth of treatment, but is satisfactory to treat small lesions. Conclusions : The measured data for backscatter electron energy, depth dose flatness dose rate and absolute dose indicates that the backscatter electrons are suitable for clinical use.

• Journal of radiological science and technology
• /
• v.27 no.3
• /
• pp.5-12
• /
• 2004

I. Introduction : The constipation is one of the common gastrointestinal symptoms seen in the clinical practice. When people come to the clinic complaining of the constipation, it is generally one of the cases of infrequent, painful or difficult evacuation as well as the hardened feces and unsatisfactory evacuation sense. Since the constipation is heavily influenced by dietary habit as well as the social and medical environment, the diagnostic radiology is useful to establish the objective and standardized definition in consideration of those various factors before diagnosis and treatment of the constipation patient. This paper describes the study of such diagnosis. II. Main Subject : Testing of CTT (colon transit time) is key study of the colon performance. CTT is very helpful in classifying the pathologic physiological types and defining the treatment plan for the chronic constipation. The study methods include using the radipaque marker, multiple marker technique and scintigraphic measurement. The defecography is the functional radiologic examination a that provides not only the anatomical information of anorectal but also performance of the pelvic floor and rectal change during evacuation. Study of dynamic movement of the anorectal during evacuation is helpful for diagnosis and treatment planning as well as follow-up testing for the constipation patient. One of the issues essential for the case history is the thorough observation of whether the patient shows the psychic psychological symptoms such as the behavior disorder or emotional disturbance. In that case, the decision must be made whether or which type of medication is needed for such psychiatric problem. III. Conclusion : The main causes of the constipation are insufficient intake of fiber or liquid. The key objective of such tests is to check etiology of the constipation. In general, the radiological examination does not provde the colon or anorectal performance information. It is envisaged that this study will provide the information to decide the testing and treatment plans and predict the prognosis of the patient by classifying the pathologic physiological types.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.1
• /
• pp.74-84
• /
• 2004

Purpose: Since I-125 emits low energy (27-35 keV) radiation, thinner crystal and collimator could be employed and, hence, it is favorable to obtain high quality images. The purpose of this study was to derive the optimized parameters of I-125 SPECT using a new simulation tool, GATE (Geant4 Application for Tomographic Emission). Materials and Methods: To validate the simulation method, gamma camera developed by Weisenberger et al. was modeled. Nal(T1) plate crystal was used and its thickness was determined by calculating detection efficiency. Spatial resolution and sensitivity curves were estimated by changing variable parameters for parallel-hole and pinhole collimator. Peformances of I-125 SPECT equipped with the optimal collimator were also estimated. Results: in the validation study, simulations were found to agree well with experimental measurements in spatial resolution (4%) and sensitivity (3%). In order to acquire 98% gamma ray detection efficiency, Nal(T1) thickness was determined to be 1 mm. Hole diameter (mm), length (mm) and shape were chosen to be 0.2:5:square and 0.5:10:hexagonal for high resolution (HR) and general purpose (GP) parallel-hole collimator, respectively. Hole diameter, channel height and acceptance angle of pinhole (PH) collimator were determined to be 0.25 mm, 0.1 mm and 90 degree. The spatial resolutions of reconstructed image of the I-125 SPECT employing HR:GP:PH were 1.2:1.7:0.8 mm. The sensitivities of HR:GP:PH were 39.7:71.9:5.5 cps/MBq. Conclusion: The optimal crystal and collimator parameters for I-125 Imaging were derived by simulation using GATE. The results indicate that excellent resolution and sensitivity imaging is feasible using I-125 SPECT.