• 제목/요약/키워드: and hood

검색결과 395건 처리시간 0.026초

보행자보호 머리거동 분석방법 개발 (Development of Analysis Method for Pedestrian Headform Movement)

  • 전해영;백창인;장현권
    • 자동차안전학회지
    • /
    • 제6권1호
    • /
    • pp.10-15
    • /
    • 2014
  • Motion Analysis of pedestrian headform was first applied in this paper for the purpose of determining the relationship between stiffness of hood and HIC. Since the analysis of headform movement involves rotation, it has been problematic if analysis of the headform movement is made in local coordinate system only. Correlation of test and simulation is expected to be enhanced through the development of New type of Head Movement Analysis Method.

유도공기 및 에어커튼을 이용한 주방 레인지후드 성능 개선에 관한 수치모사 (A Numerical Study on the Performance Improvement of Kitchen Range Hood by Air Induction and Air Curtain)

  • 손덕영;임지홍;최윤호;박재훈
    • 설비공학논문집
    • /
    • 제19권4호
    • /
    • pp.321-327
    • /
    • 2007
  • In an apartment house that is generally air-tight and well insulated, the combustion gas from cooking devices is the major source of air pollution in the kitchen. It spreads throughout the house affecting the overall Indoor all quality. In this study, the performance of the kitchen range hood which employs air induction and air curtain was investigated by numerical simulation. The results are compared with that of two other kitchen range hoods which are in general use. The two general types of range hoods considered in the present calculations are box and plate type range hoods. The former has a large capture space between the filter and suction duct, while the latter has little. It was found that the capture efficiency of the kitchen range hood with air induction and air curtain Is higher than that of the general types of range hoods by 20% approximately The reason may be because the air induction and the air curtain block the air stream escaping from the front and the side part of range hoods effectively and because an additional fan for air induction and air curtain increases suction flow rates.

기능성 아웃도어 웨어의 등산용 남성 재킷 프로토타입 디자인 (Development of the Design Prototype for Funtional Men's Outdoor-Wear Jacket)

  • 임민정;서문정;박주연;김영인
    • 복식
    • /
    • 제61권4호
    • /
    • pp.152-168
    • /
    • 2011
  • The purpose of this study is to develop a design prototype of outdoor-wear which is suitable for trekking. For achieving this purpose, 6 factors(bodice, sleeve, hood, pockets, opening, hem-line) considered for clothing function were selected, classified, and complemented based on the survey of literature and the research of 185 designs in 12 outdoor-wear brands. The results are as follows; The removable hood and 4DM sleeve style with the elastic band and velcro for the cuffs was the most preferred in the detail design on the brand research. And also the ventilation function and 1 or 2 diagonal in-seam pocket, covered zipper was preferred. Based on this result, two design prototypes of men's outdoor-wear for trekking were suggested; jacket 1 has a slim waist line and a hip length. Front opening has a zip and placket for windproof effect. There is a detachable hood with stopper around the head line. 4DM sleeve and elastic band inserted at the end of sleeve, so that prevent the hem-line raising. Two inseam pocket is placed slightly diagonal. Jacket 2 is a hood jacket with a york. The Jacket has a little roomier in waist and a hip length. Front opening is fastened by a waterproof zip. It has a 4DM sleeve and a princess line to make it placed two pocket which have ventilation functionality.

Hood Method를 이용한 직화구이 음식점의 미세먼지 배출 특성 (Emission Characteristics of Particulate Matters from Under-fired Charbroiling Cooking Process using the Hood Method)

  • 이준복;김흥주;정권;김신도
    • 한국환경보건학회지
    • /
    • 제35권4호
    • /
    • pp.315-321
    • /
    • 2009
  • Under-fired charbroiling cooking processes are known as important contributors of particulate matter (PM). In this study, we characterized the emission of particulate matters from under-fired charbroiling cooking processes using the hood method. Accumulated mass concentration of $PM_{10}$ was 92.2~99.5% and particle size of 2.0~2.5 ${\mu}m$ was highest. The concentration of PM increased very sharply at the beginning of charbroiling meats and then gradually decreased as the charbroiling continued. PM concentration also increased very sharply when gravy from meat spilled onto the frame of fire. However, mass concentration during charbroiling using only charcoals was very low compared to that of meats. We estimated the emission factors of charcoal, pork belly and pork shoulder respectively; 0.01~0.02 g/kg, 5.02~6.26 g/kg, 2.86~4.15 g/kg of $PM_{2.5}$, 0.01~0.03 g/kg, 7.44~7.91 g/kg, 4.54~5.56 g/kg of $PM_{10}$, and 0.02~0.05 g/kg, 7.59~7.95 g/kg, 4.93~5.68 g/kg of TSP. The emission factors of charcoal were negligible and the emission factors of pork belly were higher than that of pork shoulder. Emission rates of particulate matters from under-fired charbroiling cooking process were estimated as 578,009~1,265,152 kg/yr of $PM_{2.5}$, 917,539~1,598,619 kg/yr of $PM_{10}$ and 996.358~1,606,703 kg/yr of TSP. But emission factors should be verified with an in-stack cascade impactor because the reported method involves some assumptions.

심화독서용 서평에 관한 연구 (A Study on Book Reviews for Further Readings)

  • 민경록
    • 한국문헌정보학회지
    • /
    • 제52권3호
    • /
    • pp.35-59
    • /
    • 2018
  • 서평은 도서의 내용과 서지정보를 제공하여 자료선택의 기회를 제공하고, 더 나아가 독자들에게 풍부한 독서의 경험을 지원하여 독자지원서비스의 기능을 수행한다. 특히 어린이 독서분야는 문학 장치를 활용하여 지식과 정보를 전달하는 특수성으로, 한 권의 독서에서 그치는 것이 아니라 풍부한 비교독서를 통하여 문학적 상상력이 확대될 수 있도록 추가적인 읽기를 지원하여야 한다. 이에 어린이문학작품 중 "빨간 모자"를 사례로, 독서 심화로의 안내를 위한 서평의 '문헌적 비교' 항목 부문에서 다루어야 할 사항은 다음과 같다. 첫째, 대상 도서의 내용을 객관적으로 기술한다. 둘째, "빨간 모자"의 문학사적 가치와 담론을 제시하여 여타의 작품들과의 차이와 독창성을 분석할 수 있도록 한다. 셋째, "빨간 모자"의 서사 구조가 변용된 여타의 작품군(群)에 관한 서지정보를 제공한다. 넷째, 서사적 구조뿐 아니라 물리적 형태의 변용된 작품이 있을 경우 함께 소개하여 선택과 독서로의 접근의 폭을 넓힌다.

고속전철의 터널입구 형상이 공력특성 및 터널입구 압축파에 미치는 영향 (Effect of Tunnel Entrance Shape of High Speed Train on Aerodynamic Characteristics and Entry Compression Wave)

  • 정수진;김우승
    • 한국자동차공학회논문집
    • /
    • 제12권6호
    • /
    • pp.111-118
    • /
    • 2004
  • The work presented in this paper concerns the aerodynamic characteristics and compression wave generated in a tunnel when a high speed train enters it. A large number of solutions have been proposed to reduce the amplitude of the pressure gradient in tunnels and some of the most efficient solutions consist of (a) addition ofa blind hood, (b) addition of inclined part at the entrance, and (c) holes in the ceiling of the tunnel. These are numerically studied by using the three-dimensional unsteady compressible Euler equation solver with ALE, CFD code, based on FEM method. Computational results showed that the smaller inclined angle leads to the lower pressure gradient of compression wave front. This study indicated that the most efficient slant angle is in the range from $30^{\circ}$ to $50^{\circ}$. The maximum pressure gradient is reduced by $26.81\%$ for the inclined angle of $30^{\circ}$ as compared to vertical entry. Results also showed that maximum pressure gradient can be reduced by $15.94\%$ in blind hood entry as compared to $30^{\circ}$ inclined tunnel entry. Furthermore, the present analysis showed that inclined slant angle has little effect on aerodynamic drag. Comparison of the pressure gradient between the inclined tunnel hood and the vertical entry with air vent holes indicated that the optimum inclined tunnel hood is much more effective way in reducing pressure gradient and increasing the pressure rise time.

Change Core 공법을 이용한 렌지후드 Front Cover 개발 (A Study on the Development of a Range Hood Front Cover using Change Core Method)

  • 박종남
    • 한국산학기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.3363-3369
    • /
    • 2014
  • 최근에 건축물의 실내환경을 쾌적하고 안전하게 유지하는 데 많은 노력이 일어나고 있다. 이러한 가운데 주방에서 주로 사용되는 렌지후드에 따른 환기방식은 많이 채택되고 있다. 이에 따라 다양한 디자인의 렌지후드가 적용되고 있다. 렌지후드는 여러 가지 여건상 프레스 금형으로 제작되어 지는데 중,소량의 생산에는 경제성이 떨어진다. 이러한 문제점을 보완하는 방안이 검토되고 있는 상황에서 코어 변환에 따른 금형개발은 매우 유용하리라 판단된다. 본 연구는 금형의 core를 change core 공법으로 설계하였고, 총 4공정으로 금형제작을 수행하였다. 이런 결과로 생산기간 단축 및 모델변경이 용이한 프레스 금형을 개발하였다. 또한 시제품은 3차원 측정결과 제품 표면의 모든 영역에서 허용오차 범위(${\pm}2.00mm$)로 합격하였다.

Clinical Features and Outcomes of Superficial Keratectomy and Conjunctival Advancement Hood Flap in Three Dogs with Different Extents of Corneal Edema

  • Kim, Youngsam;Nam, Sunhwa;Kang, Seonmi
    • 한국임상수의학회지
    • /
    • 제38권2호
    • /
    • pp.98-102
    • /
    • 2021
  • Three dogs with different extents of corneal edema were presented to the Dana Animal Hospital Eye Center. The dogs (3 eyes) were diagnosed with corneal endothelial degeneration with clinical signs of corneal edema, conjunctival hyperemia, and mild blepharospasm through a full ophthalmic examination. For the treatment of corneal edema, superficial keratectomy using a crescent microsurgical knife was performed, and a conjunctival advancement hood flap was applied to the stromal defects. In two cases where corneal edema and opacity were observed only in a part of the cornea, corneal edema was reduced and did not progress to other parts of the cornea and corneal transparency and vision were also well-maintained during the follow-up on days 349 and 231 after the surgery. In a case where the whole cornea was edematous and cloudy, corneal edema and opacity had not clearly improved at the last follow-up on day 275 after the surgery. In conclusion, SKCAHF relieved corneal edema and improved vision, and the prognosis tended to be better when there was less corneal edema caused by CED.