• 한국추진공학회지
• /
• 제10권3호
• /
• pp.99-108
• /
• 2006

본 논문은 기존 파이로 부품인 폭발볼트의 기능을 그대로 유지하면서 분리시 발생되는 파편 및 충격파의 악 작용과 파편을 완벽히 제거할 수 있게 형상기억합금(Shape Memory Alloy)을 이용한 분리장치(Fangibolt) 모델의 설계 및 모사에 관한 연구이다. Frangibolt는 기존 폭발볼트에서 사용하는 분리화약을 사용하지 않고 스마트 소재인 형상기억합금의 온도에 따라 변화되는 미세조직에 따른 응력생성을 이용하여 파이로 장치를 분리시키는 Non Pyrotechnic 장치로써, 실제 Frangibolt노치부에 생성되는 응력의 분포 및 분리거동을 해석함으로써 Frangibolt 설계에 필요한 인자를 파악할 수 있었다. 또한 볼트 설계방법의 최적화를 제시함으로써 향후 다른 종류의 SMA을 이용한분리장치 설계 및 해석 모델에 기초자료를 제공할 수 있을 것이다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2015년도 하계학술대회
• /
• pp.334-336
• /
• 2015

본 논문은 다시점 영상에서 프레임율 변환 (Frame Rate Up Conversion, FRUC) 기법을 적용하는 방식에 대하여 서술한다. 먼저, 임의의 시점의 영상을 생성하기 위해서 사용되는 중간시점 영상합성 (View Synthesis, VS)기법과 연속되는 영상 사이에 새로운 영상을 만들어내는 프레임율 변환기법에 대하여 간략히 소개한다. 그리고, 기존의 프레임율 변환 방식과 다시점 영상의 특징을 이용한 프레임율 변환 방식을 소개하고 각각의 방식으로 생성한 영상의 화질을 비교한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.154-157
• /
• 2004

The KOMPSAT European Cooperation aims at enhancing existing and establishing new collaborations between KARI and various European institutions. The objective is to create mutual data and information exchange possibilities and to develop new data applications of available and future space based Earth Observation sensors. In this paper, the concept of a KOMPSAT regional application center, a joint development between KARI, ARCS and other European partners is presented. This includes the establishment of an additional KOMPSAT-2 downlink in Europe, and the developments of a state-of-the-art user service system for urban and environmental security monitoring.

• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.27-31
• /
• 2009

Ferritic stainless steels have a good heat resistance and economic advantage. They are used for applications such as automotive exhaust systems where resistance to general corrosion is superior to carbon steels. However, there are not enough research for ferritic stainless steels on weldability mainly used as automotive exhaust manifolds. In this study, mechanical and microstructure properties of as-welded STS 429L and STS 444 ferrite stainless steels were confirmed by tensile, bending, hardness test, optical microscopy and scanning electron microscopy. Tensile strength of the STS 444 is higher than the STS 429L when it is a raw material. In contrast to this fact, STS 429L indicated higher tensile strength after butt welded. In addition, the hardness have a increasing tendency as getting down on the bead.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.397-408
• /
• 2008

A wide variety of applications of imaging spectrometer have been proved using data from airborne systems. The Compact Airborne Imaging Spectrometer System (CAISS) was jointly designed and developed as the airborne hyperspectral imaging system by Korea Aerospace Research Institute (KARI) and ELOP inc., Israel. The primary mission of the CAISS is to acquire and provide full contiguous spectral information with high spatial resolution for advanced applications in the field of remote sensing. The CAISS consists of six physical units; the camera system, the gyro-stabilized mount, the jig, the GPS/INS, the power inverter and distributor, and the operating system. These subsystems are to be tested and verified in the laboratory before the flight. Especially the camera system of the CAISS has to be calibrated and validated with the calibration equipments such as the integrating sphere and spectral lamps. To improve data quality and its availability, it is the most important to understand the mechanism of imaging spectrometer system and the radiometric and spectral characteristics. The several performance tests of the CAISS were conducted in the camera system level. This paper presents the major characteristics of the CAISS, and summarizes the results of performance tests in the camera system level.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.163-184
• /
• 2004

Vortex flow fundamentals have been investigating for about hundred years and many distinguished features had been discovered and comprehensively studied over that time. Due to unique hydrodynamic features vortex flows are now widely used in many industrial applications, including energy and power systems. combustion chambers. fuel sprayers. heat exchangers. clean-up systems. drying chambers. Up to recently aerospace engineers employed vortex flow only in combustion systems to stabilize a flame zone or in advanced heat exchangers to enhance heat transfer processes. This paper provides an overview of some recently developed aerothermal vortex technologies applied to aerospace engineering.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.285-287
• /
• 2006

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.113-115
• /
• 2006

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.729-736
• /
• 2022

Earth is facing a serious problem of pollution and scarcity of energy sources. The synthetic fibers used in automobile and Aerospace manufacturing sectors are non-renewable and harmful to environment. International Agency such as FAA and SAE is forcing for green fuel, green materials and structures. Further exploration is much needed to understand its potential in structural applications. In the current study, hemp and Jute fibre based composites were developed and tested for assessing their suitability for possible applications in automobile and aerospace sectors. Composites were undergone tensile test, water absorption test, and fatigue analysis to understand its behavior under various loading conditions. The finite element analysis has been carried out to understand the fatigue behaviour of composites. The results revealed that the usage of hemp and jute fibre reinforced composites can improve mechanical properties and have shown a viable alternative to replace synthetic fibres such as glass fibres for specific applications. Hemp reinforced bio-composites have shown better performance as compared to Jute reinforced bio-composites while water resistance characteristics for hemp is poorer to jute fibres.

• 한국정밀공학회지
• /
• 제28권11호
• /
• pp.1242-1250
• /
• 2011

Several biomimetic artificial muscles including the electro-active synthetic polymers (SSEBS, PSMI/PVDF, SPEEK/PVDF, SPSE, XSPSE, PVA/SPTES and SPEI), bio-polymers (Bacterial Cellulose and Cellulose Acetate) and nano-composite (SSEBS-CNF, SSEBS-$C_{60}$, Nafion-$C_{60}$ and PHF-SPEI) actuators are introduced in this paper. Also, some applications of the developed biomimetic actuators are explained including biomimetic robots and biomedical active devices. Present results show that the developed electro-active polymer actuators with high-performance bending actuation can be promising smart materials applicable to diverse applications.