Browse > Article
http://dx.doi.org/10.12989/sem.2022.81.6.729

Comparative investigation on fatigue and moisture absorption behavior of hemp and Jute fibre polymer composites  

Kumar, B. Ravi (School of Mechanical Engineering, SASTRA Deemed University)
Hariharan, S.S. (School of Mechanical Engineering, SASTRA Deemed University)
Publication Information
Structural Engineering and Mechanics / v.81, no.6, 2022 , pp. 729-736 More about this Journal
Abstract
Earth is facing a serious problem of pollution and scarcity of energy sources. The synthetic fibers used in automobile and Aerospace manufacturing sectors are non-renewable and harmful to environment. International Agency such as FAA and SAE is forcing for green fuel, green materials and structures. Further exploration is much needed to understand its potential in structural applications. In the current study, hemp and Jute fibre based composites were developed and tested for assessing their suitability for possible applications in automobile and aerospace sectors. Composites were undergone tensile test, water absorption test, and fatigue analysis to understand its behavior under various loading conditions. The finite element analysis has been carried out to understand the fatigue behaviour of composites. The results revealed that the usage of hemp and jute fibre reinforced composites can improve mechanical properties and have shown a viable alternative to replace synthetic fibres such as glass fibres for specific applications. Hemp reinforced bio-composites have shown better performance as compared to Jute reinforced bio-composites while water resistance characteristics for hemp is poorer to jute fibres.
Keywords
composites; fatigue analysis; hemp; Jute; moisture absorption; natural fibres;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Cheung, H.Y., Ho, M.P., Lau, K.T., Cardona, F. and Hui, D. (2009), "Natural fibre-reinforced composites for bioengineering and environmental engineering applications", Compos. Part B: Eng., 40(7), 655-663. https://doi.org/10.1016/j.compositesb.2009.04.014.   DOI
2 Rajak, D.K., Pagar, D.D., Kumar, R. and Pruncu, C.I. (2019), "Recent progress of reinforcement materials: a comprehensive overview of composite materials", J. Mater. Res. Technol., 8(6), 6354-6374. https://doi.org/10.1016/j.jmrt.2019.09.068.   DOI
3 Shah, D.U., Schubel, P.J., Clifford, M.J. and Licence, P. (2013), "Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams", Compos. Sci. Technol., 74, 139-149. https://doi.org/10.1016/j.compscitech.2012.10.015.   DOI
4 Sreehari, V.M., Kumar, B.R. and Maiti, D.K. (2017), "Structural analysis using shear deformation theories having nonpolynomial nature: A review", Int. J. Appl. Eng. Res., 12, 20.
5 Bougherara, H., Sawi, I.E., Fawaz, Z. and Meraghni, F. (2015), "Investigation and modeling of the fatigue damage in natural fiber composites", Proceedings of the TMS Middle East-Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), Springer, Cham.
6 Djeghader, D. and Redjel, B. (2019a), "Experimental study of flexural fatigue behavior of Jute fibers reinforced polyester composites with statistical analysis", Fifth International Conference on Energy, Materials, Applied Energetics and Pollution, 1, November.
7 Abd El-Baky, M.A. and Attia, M.A. (2019), "Flexural fatigue performance of hybrid composite laminates based on E-glass and polypropylene fibers", J. Thermoplast. Compos. Mater., 32(2), 228-247. https://doi.org/10.1177/0892705717751020.   DOI
8 Alves, C., Silva, A.J., Reis, L.G., Freitas, M., Rodrigues, L.B. and Alves, D.E. (2010), "Ecodesign of automotive components making use of natural jute fiber composites", J. Clean. Prod., 18(4), 313-327. https://doi.org/10.1016/j.jclepro.2009.10.022.   DOI
9 Bambach, M.R. (2017), "Compression strength of natural fibre composite plates and sections of flax, jute and hemp", Thin Wall. Struct., 119, 103-113. https://doi.org/10.1016/J.TWS.2017.05.034.   DOI
10 Chaudhary, V. and Ahmad, F. (2020), "A review on plant fiber reinforced thermoset polymers for structural and frictional composites", Polym. Test., 91, 106792. https://doi.org/10.1016/j.polymertesting.2020.106792.   DOI
11 Han, Q., Yang, G., Xu, J. and Wang, Y.H. (2017), "Fatigue analysis of crumble rubber concrete-steel composite beams based on XFEM", Steel Compos. Struct., 25(1), 57-65. https://doi.org/10.12989/scs.2017.25.1.057.   DOI
12 Kumar, B.R. and Hariharan, S.S. (2019), "Experimental and microstructural evaluation on mechanical properties of sisal fibre reinforced bio-composites", Steel Compos. Struct., 33(2), 299-306. https://doi.org/10.12989/scs.2019.33.2.299.   DOI
13 Fotouh, A., Wolodko, J.D. and Lipsett, M.G. (2014), "Fatigue of natural fiber thermoplastic composites", Compos. Part B: Eng., 62, 175-182. https://doi.org/10.1016/j.compositesb.2014.02.023.   DOI
14 Gassan, J. (2002), "A study of fibre and interface parameters affecting the fatigue behaviour of natural fibre composites", Compos. Part A: Appl Sci. Manuf., 33(3), 369-374. https://doi.org/10.1016/S1359-835X(01)00116-6.   DOI
15 Graceraj, P.P., Venkatachalam, G., Shankar, A.G. and Kumar, K. (2016), "Investigation on fatigue strength of the jute fiber reinforced hybrid polymer matrix composites", UPB Sci. Bull. Ser. D, 78, 185-196.
16 Gurunathan, T., Mohanty, S. and Nayak, S.K. (2015), "A review of the recent developments in biocomposites based on natural fibres and their application perspectives", Compos. Part A: Appl. Sci. Manuf., 77, 1-25. https://doi.org/10.1016/j.compositesa.2015.06.007.   DOI
17 Kumar, B.R., Srimannarayana, C.N., Krishnan, K.A. and Hariharan, S.S. (2020), "Experimental evaluation on comparative mechanical properties of Jute-Flax fibre Reinforced composite structures", Struct. Eng. Mech., 74(4), 515-520. https://doi.org/10.12989/sem.2020.74.4.515.   DOI
18 de Andrade Silva, F., Chawla, N. and de Toledo Filho, R.D. (2009), "An experimental investigation of the fatigue behavior of sisal fibers", Mater. Sci. Eng.: A, 516(1-2), 90-95. https://doi.org/10.1016/J.MSEA.2009.03.026.   DOI
19 Monteiro, S.N., Lopes, F.P.D., Ferreira, A.S. and Nascimento, D.C.O. (2009), "Natural-fiber polymer-matrix composites: cheaper, tougher, and environmentally friendly", Jom, 61(1), 17-22. https://doi.org/10.1007/s11837-009-0004-z.   DOI
20 de Vasconcellos, D.S., Touchard, F. and Chocinski-Arnault, L. (2014), "Tension-tension fatigue behaviour of woven hemp fibre reinforced epoxy composite: A multi-instrumented damage analysis", Int. J. Fatig., 59, 159-169. https://doi.org/10.1016/j.ijfatigue.2013.08.029.   DOI
21 Djeghader, D. and Redjel, B. (2019), "Effect of water absorption on the Weibull distribution of fatigue test in jute-reinforced polyester composite materials", Adv. Composites Lett., 28, 0963693519853833. https://doi.org/10.1177/0963693519853833.   DOI
22 Bendada, A., Boutchicha, D., Khatir, S., Magagnini, E., Capozucca, R. and Abdel Wahab, M. (2020), "Mechanical characterization of an epoxy panel reinforced by date palm petiole particle", Steel Compos. Struct., 35(5), 627-634. https://doi.org/10.12989/scs.2020.35.5.627.   DOI
23 Sanjay, M.R. and Yogesha, B. (2016), "Study on water absorption behaviour of jute and kenaf fabric reinforced epoxy composites: Hybridization effect of e-glass fabric", Int. J. Compos. Mater., 6, 55-62. https://doi.org/10.5923/j.cmaterials.20160602.03.
24 Ramesh, M., Palanikumar, K. and Reddy, K.H. (2013), "Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites", Compos. Part B: Eng., 48, 1-9. https://doi.org/10.1016/j.compositesb.2012.12.004.   DOI
25 Mustafa, S.A. (2018), "Experimental and FE investigation of repairing deficient square CFST beams using FRP", Steel Compos. Struct., 29(2), 187-200. https://doi.org/10.12989/scs.2018.29.2.187.   DOI