• Korean Journal of Optics and Photonics
• /
• v.31 no.1
• /
• pp.7-12
• /
• 2020

In this paper, we experimentally investigate the fiber fuse in single-mode 2-kW-class high-power fiber amplifiers, depending on the cooling method at the splicing point. We measured the temperature of the splicing point between the pump-signal combiner and gain fiber as a function of laser output power. The temperature of the splicing point increased from 20 to 32℃ with a slope of 0.01℃/W, up to 1.2 kW of laser output power. At higher powers the temperature of the splicing point increased dramatically, with a slope of 0.08℃/W. After that, the fiber amplifier was destroyed during operation at 1.96 kW of output power by fiber fuse. The bullet shape, a common feature of fiber fuse, was observed in the damaged passive fiber core of the pump-signal combiner. Later, we adopted an improved water-cooled cold plate to increase the cooling efficiency at the splicing point, and investigated the laser output power. The temperature at the splicing point was 35.8℃ with a temperature-rise slope of 0.007℃/W at the maximum output power of 2.05 kW. The beam quality M² was measured to be less than 1.3, and the output beam's profile was a stable Gaussian shape. Finally, neither fiber fuse nor mode instability was observed in the fiber amplifier at the maximum output power of 2.05 kW.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.443-444
• /
• 2004

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.321-324
• /
• 2000

본 논문은 전력증폭기 정합회로 설계시 주어진 임피던스를 가지고 Ansoft사의 Ensemble을 이용해 기본적인 정합회로를 설계하였다. MHL21336 , MRF21030 ,MRF21125로 대전력 증폭기를 설계 및 제작하여 측정해본 결과 전체 이득이 52㏈, 대역폭 안에서 이득 평탄도는 ±0.37㏈ 정도, 출력이 PEP 5l㏈m에서 -30㏈c의 결과를 얻었다. Bias 전류에 대한 5㎒ Tone-space IMD 특성곡선을 측정해 본 결과 기지국용 대전력 증폭기로 사용할 수 있음을 보였다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.52-61
• /
• 1997

In this paper it is proposed a new architecture for N*N optical packet switching system. It consists of active-splitter type pf packet router, travelling type of optical buffer memory for packet contention resoltuion and an electronic controller. the BER performance of the proposed switching system is analyzed with respect to channel crosstalks and amplified spontaneous emissio noise form switching elements and optical amplifiers respectively. Operational validity of the proposed switching system is also experimentally proved by realizing 2*2 optical packet switching system.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.637-640
• /
• 1998

A 35 ㎓ GaAs MMIC power amplifier was designed using a monolithic technology with AlGaAs/InGaAs/GaAs power PM-HEMTs, rectangualr spiral inductors and Si3N4 MIM capacitors. The GaAs power MESFETs in the input and output stages have total gate widths of 120 um and 320 um, respectively. Total S21 gain of 10.82dB and S11 of -16.26 dB were obtained from the designed MMIC power amplifier at 35 ㎓. And the chip size of the MMIC amplifier was 1.4$\times$0.8 $\textrm{mm}^2$

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.327-330
• /
• 1998

A 2watts MMIC(Monolithic Microwave Integrated Circuits) SSPA(Solid State Power Amplifiers) for 20GHz band communication systems has been designed, manufactured and measured. The 0.15um pHEMT technologywith the gate size of 400um for single device was used for the fabrication of MMIC Power Amplifier chips. The precision MIC patterns for the peripherals like power combiner/divider and microstrip lines were realized using hard substrate for gold wire/ribbon bonding. The measured data shows that this MMIC SSPA has the linear gain of 18dB, output power of 33.42dBm(2.2Watts)at 20~21GHz.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.319-322
• /
• 1998

A 20 GHz 2-stage MMIC (Monolithic Microwave Integrated Circuits) LNA(Low Noise Amplifiers) has been designed. The pHEMT with gate length of 1.15 um has been used to provide ultra low noise and high gain amplification. Series and Shunt feedback circuits were interted to ensured high stability over frequency range of DC to 60 GHz. The size of designed MMIC LNA is 2285um x 2000um(4.57mm2). The simulated noise figure of MMIC LNA is less than 1.7 dB over frequency range of 20 GHz to 21 GHz.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.38-39
• /
• 2002

Optical telecommunication has been growing at a rate that exceeds even the "Moore′s Law". However, while the electronic revolution has allowed everyone to have his/her own PC, the optical revolution is still confined to the long-haul network such that the individual end users are still connected to an electronic metro/access networks. However, given the rapid increase in the data traffic (e.g., multimedia), the optical edge that separates the individual end users from optical networks will eventually have to include the metro/acces networks. (omitted)

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.301-308
• /
• 1995

A high-precision pre-amplifier is designed for general use in EEG measurement system. It consists of signal generator, signal amplifier with a impedance converter, shield driver, body driver, differential amplifier, and isolation amplifier. The combination of minimum use of inaccurate passive components and the appropriate matching of each monolithic amplifiers results in good noise behavior, low leakage current, high CMRR, high input impedance, and high IMRR. The performance of EEG pre-amplifier has been verified by showing the typical EEG pattevn of a nomad person through the clinical experiments.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.78-82
• /
• 1984

The purposed of this paper is to realize two dimensional acoustic image using focusing method. In the experiment, it consists of phase delay part, 14 analog multiplexers, multi-amplifiers, A/D converter, DMA interfacing parts, two linear arrays(resonance frequency 25 KHz, radius 0.75 Cm diac type). Finally in this experimental result, both electrical deflection and dynamic focusing are realized and gets two dimensional acoustic image using focusing method.