• 한국전자파학회논문지
• /
• 제13권2호
• /
• pp.146-154
• /
• 2002

전력증폭기 포화영역가지의 선형화 방법을 제안한다. 최적화된 계수론 갖는 전치왜곡기 이득 다항식을 도입한다. 전력증폭기는 포화영역 근처에서 동작할 때 가장 높은 효율을 가진다. 이 전치왜곡기 이득 다항식을 이용하여 전력증폭기의 비선형성을 보상함으로써 증폭기의 효율을 극대화 할 수 있다. 씨뮬레이션 결과 ACPR (Adjacent Channel Power Ratio)이 대역 가장자리에서 약 63 dB 개선된다. 선형화기의 수렴 및 재수렴 특성 역시 만족스러운 성능을 보인다.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.660-667
• /
• 1998

본 논문에서는 실내 무선광연결에서 2개의 채널을 구성한 경우에 빔의 중첩으로 인하여 발생하는 흔신의 영향을 줄이기 위하여 차동증폭기를 사용하였다. 또한 동일한 원리를 이용하면 주변광집음이 있는 경우에 잡음을 억제할 수 있음을 실험적으로 확인하였다. 이러한 방법은 별도의 광학적 필터나 전기적 필터를 사용하지 않고 간단히 차동증폭기로 구현되므로 근거리 광연결을 구성하는 경우에 매우 유용하게 사용할 수 있다.

• 전기의세계
• /
• 제20권3호
• /
• pp.17-26
• /
• 1971

An experimental design of magnetic amplifiers and their characteristics in steady state are presented. A saturable reactor model having 2KVA capacity was designed, using Z-10 grain-oriented silicon steel which is commonly used in power transformers. Experimental and theoretical analysis show that the experimental results are in good agreement with the equal ampere-turns law. In addition to the saturable reactor, the self-saturated magnetic amplifiers of 0.4VA and 5VA capacity, using 50% Ni-Fe alloy cores having rectangular hysteresis loops were designed. Control characteristic curves of these amplifiers show high ampere-turn gain enough to be used for voltage controllers under load and non-contact magnetic switches of the rated capacity.

• Journal of Communications and Networks
• /
• 제18권4호
• /
• pp.551-558
• /
• 2016

In multifiber all-optical networks, optical amplifiers are used for amplifying multiple optical signals with different wavelengths in fibers. An optical amplifier operates when any of lightpaths passes through it. Therefore, it should simultaneously amplify as many lightpaths as possible for efficiently utilizing its power. This paper proposes a dynamic lightpath establishment scheme considering the use efficiency of the optical amplifiers and the depletion of the wavelength resources in multifiber all-optical networks. The proposed scheme provides a routing and wavelength assignment strategy that reduces both the power consumption of the optical amplifiers and the blocking probability of the lightpath establishment. Through simulation experiments, we demonstrate the effectiveness of the proposed scheme.

• 한국광학회지
• /
• 제31권5호
• /
• pp.218-222
• /
• 2020

본 연구에서는 편광 유지 광섬유 기반의 고출력 이터븀 첨가 광섬유 증폭기를 이용하여 고품질의 2 kW급 출력을 갖는 파장제어 빔 결합 레이저를 구현하였다. 파장제어 빔 결합을 위하여 광섬유 증폭기의 발진 파장은 각각 1062 nm, 1063 nm, 1064 nm, 1065 nm, 1066 nm로서 서로 다른 값을 갖는다. 협대역 광섬유 레이저 증폭 시 발생하는 유도 브릴루앙 산란 비선형 효과를 완화하기 위해 시드 광원은 유사이진난수 신호(pseudo-random bit sequence, PRBS)를 이용하여 위상 변조된 5 GHz의 협대역 선폭을 갖도록 하였으며 전송광섬유는 30 ㎛ 코어 크기를 가지는 대면적 편광 유지 광섬유를 이용하였다. 파장제어 빔 결합으로 얻은 레이저의 최대 출력은 2.3 kW이며 빔 품질(M²)은 1.74이었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.90-95
• /
• 1995

This paper describes the highly-sensitive Si magnetic sensor using the amplitude modulation in order to real ice the integrated magnetic sensor which to sensor a weak magnetic field. Generally, the most important two parameters in Hall IC which degrade the ability of magnetic detection are the variation of offset according to the variation of temperature and the noise of amplifiers. In this paper, we use a Hall element and compensator to reduce the offset and the nouse of amplifiers by Using amplititude modulation method.

• 센서학회지
• /
• 제18권1호
• /
• pp.95-101
• /
• 2009

A simple and new CMOS potentiostat circuit for amperometric sensor is described. To maintain a constant potential between the reference and working electrodes, only one differential difference amplifier (DDA) is needed in proposed design, while conventional potentiosatat requires at least 2 operational amplifiers and 2 resistors, or more than 3 operational amplifiers and 4 resistors for low voltage CMOS integrated potentiostat. The DDA with rail-to-rail design not only enables the full range operation to supply voltage but also provides simple potentiostat system with small hardwares and low power consumption.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권1호
• /
• pp.59-65
• /
• 1997

In this paper, a feedforward amplifier with error correction is designed and implemented. This amplifier is composed of operational amplifier, the performance of which is compared with that of the reference amplifier without feedforward error correction. As a result, the sec¬ondary harmonics level is improved about 10 [dB]. Therefore it is shown that the proposed feedforward amplifier network is to be adopted able for wide - band amplifiers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.159-163
• /
• 1988

The purpose of this paper is to investigate the effects of alpha particles on the memory circuits such as a sense amplifier and bit lines. Sense amplifiers column alpha particle hits have been simulated for a mega bit DRAM using SPICE, a circuit simulation program. The energy of alpha particle and the substrate concentration are found to strongly influence the likehood of soft errors. Our results may be useful for the designing of alpha particle immune sense amplifiers.

• 전기의세계
• /
• 제24권4호
• /
• pp.80-82
• /
• 1975

This paper presents a synthesis procedure of multi-channel active filters, which realizes an arbitrary N*N matrix of real rational functions in the complex variable s as a voltage transfer matrix. The resultant network reveals a transformerless grounded active RC(2N+1)-terminal network. The active network is consisted of six 2N-port RC networks with 2N single-ended operational amplifiers.