• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.89-98
• /
• 2016

Purpose - This article tackles risk communication issues and aims to address the characteristics of MERS risk information distribution in South Korea, and secondly to examine the communicative behavior of the public health authority in terms of the quality of communication strategies. Thirdly, the study attempts to figure out the risk communication to cope with MERS through the applications of SMCRE model in chronological order. We employ the social amplification of risk framework for analyzing the emergent public response as one of the main approaches. Research Design, Data and Methodology - The main framework of this study is theoretically based on the social amplification of risk, which describes signals about risk transmitted and processed by individuals and social groups. The model also reflects the interactions between social groups and institutes about disaster-related risk issues, which are potential amplifiers or attenuators of communication signals. S-M-C-R-E Model is methodologically employed to examine the social amplification for MERS risk information in each period, which we defined operationally. The proposed methodology allows the assessment of effectiveness and ineffectiveness on risk communication to be conceptualized as a countermeasure against disasters. The paper focuses on exploring how social risk amplification can be applied and organized in each stage. Results - The SMCRE model describes the exchange of risk information and is also applied to all forms of communication between stakeholders including public health authority, local government and media. Each factor of risk communication includes source, message, channel, receiver and effect. The results support that the effective risk communication involves not only the improved reliability of public health authority as a key factor of risk communication, but also a close cooperation and good collaboration with local governments. It does not seem to be possible that the government-initiated risk communication based on controllability and management cope effectively with infectious disease in early stage. The results of this study imply that the shared risks between local, regional and national authorities can enhance risk communication system. Conclusions - The study supports that the disparities in how disaster-related risk information is interpreted and coded, have made effective risk communication and public sense-making impeded. Our findings support a more communicative discussion about the role of risk information sharing between governments for the improvement of emergency management and underline the importance of social elements in the risk communication, such as relationship and trust building. Findings suggest that trust building between stakeholders could be added to help explain the processes of social amplification and attenuation of risk. It would be recommended that the continuous risk communication with all the involved stakeholders will be able to help national health promotion policy to be improved regarding emergency management. Furthermore, risk communication has to be a scientific approach for the communication pertaining to potentially sensitive or controversial situations with public concerns and low public trust.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.475-483
• /
• 2012

This paper presents new type of the hybrid supply modulator for the next reconfigurable transmitters. The efficiency of the hybrid supply modulator is one of the most important performance. For enhancement the efficiency, multi-switching structure in the hybrid supply modulator is employed. Additionally, input envelope signal sensing stage is employed for implementation multi-mode operation. To compare the performance of the proposed hybrid supply modulator, the conventional hybrid supply modulator is also designed. The measured efficiency of the proposed hybrid supply modulator is 85 %/84 %/79 % for EDGE/WCDMA/LTE signals which have 384 kHz/3.84 MHz/5 MHz bandwidth, respectively. The efficiency of the proposed hybrid supply modulator is higher than the conventional hybrid supply modulator. Therefore, this structure shows good candidate for the reconfigurable transmitters.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.67-76
• /
• 2005

This paper proposes a compact-sized surface myoelectric sensor for the myoelectric hand prosthesis. To fit the surface myoelectric sensor in the socket for the myoelectric hand prosthesis, the sensor should be a compact size. The surface myoelectric sensor is. composed of a skin interface and a single processing circuit that are mounted on a single package. The skin interface has one reference and two input electrodes, and the reference electrode is located in the center of two input electrodes. In this paper we propose two types of sensors with the circle- and bar-shaped reference electrode, but all input electrodes are the bar-shaped. The metal material of the electrodes is the stainless steel (SUS440) that endures sweat and wet conditions. Considering the conduction velocity and the median frequency of the myoelectric signal, we select the inter-electrode distance (IED) between two input electrodes as 18mm, 20mm, and 22 mm. The signal processing circuit consists of a differential amplifier with a band pass filter, a band rejection filter for rejecting 60Hz power-line noise, amplifiers, and a mean absolute value circuit. We evaluate the proposed sensor from the output characteristics according to the IED and the shape of the reference electrode. From the experimental results we show the surface myoelectric sensor with the 18mm IED and the bar-shaped reference electrode is suitable for the myoelectric hand prosthesis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.872-882
• /
• 1994

In this paper, the Low Noise Amplifier(LNA) is designed and fabricated to include a band pass filter characteristics considering the antenna system characteristics according to the transmitting and receiving signal level of communication satellite transponder. As an example, a 2-stage low noise amplifier and a 4-stage amplifier and designed, fabricated and measured at 14,0~14.5GHz of receiving frequency band. This fabricated LNA has shown the gain with very good flatness within pass-band, and its gain decreases rapidly out of band resulting in supperssion of the transmitting signal power leakage. It has shown the 20.3dB +- 0.1dB of pass-band gain, the 1.44dB +-0.04dB of noise figure and the 14dB rejection out of band(12.25~12.75GHz). The gain flatness, noise figure and group delay of this 2-stage LNA satisfactorily met the simulation results. And the fabricated 4-stage amplifier has shown the more than 42dB of pass-band gain, the +-0.25dB of flatness and the 28dB of the rejection effect for transmitting power leakage. The 2-stage LNA and 4-stage amplifier, in this paper, will bring a design margin for the input filter and also result in the system cost reduction.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.60-68
• /
• 2008

This work describes a re-configurable 10MS/s to 100MS/s, low-power 10b two-step pipeline ADC operating at a power supply from 0.5V to 1.2V. MOS transistors with a low-threshold voltage are employed partially in the input sampling switches and differential pair of the SHA and MDAC for a proper signal swing margin at a 0.5V supply. The integrated adjustable current reference optimizes the static and dynamic performance of amplifiers at 10b accuracy with a wide range of supply voltages. A signal-isolated layout improves the capacitor mismatch of the MDAC while a switched-bias power-reduction technique reduces the power dissipation of comparators in the flash ADCs. The prototype ADC in a 0.13um CMOS process demonstrates the measured DNL and INL within 0.35LSB and 0.49LSB. The ADC with an active die area of $0.98mm^2$ shows a maximum SNDR and SFDR of 56.0dB and 69.6dB, respectively, and a power consumption of 19.2mW at a nominal condition of 0.8V and 60MS/s.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.42-48
• /
• 2008

Next generation wireless communication systems require RF transceivers that enable multiband/multimode operations. Polar transmitters are known as good candidates for high data rate systems such as EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband Code Division Multiple Access), and WLAN (Wireless Local Area Network) because they can obtain high efficiency by using efficient switched-mode RF power amplifiers. In this paper, we investigate the performance of a simple peak windowing scheme for the OFDM (Orthogonal frequency Division Multiplexing) polar transmitter, which requires no change of a receiver structure or no additional information transmission. The approach we employed is to apply the peak windowing scheme to the amplitude modulated signals of the polar transmitter to reduce the PAPR (Peak-to-Average Power Ratio). The BER (Bit Error Rate) and EVM (Error Vector Magnitude) performances are measured for various window types and lengths. The simulation results demonstrate that the proposed algorithm mitigates out-of-band distortion introduced by clipping along with PAPR reduction.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.69-76
• /
• 2008

This work proposes a 12b 1kS/s 65uA 0.35um CMOS algorithmic ADC for sensor interface applications such as accelerometers and gyro sensors requiring high resolution, ultra-low power, and small size simultaneously. The proposed ADC is based on an algorithmic architecture with recycling techniques to optimize sampling rate, resolution, chip area, and power consumption. Two versions of ADCs are fabricated with a conventional open-loop sampling scheme and a closed-loop sampling scheme to investigate the effects of offset and 1/f noise during dynamic operation. Switched bias power-reduction techniques and bias circuit sharing reduce the power consumption of amplifiers in the SHA and MDAC. The current and voltage references are implemented on chip with optional of-chip voltage references for low-power SoC applications. The prototype ADC in a 0.35um 2P4M CMOS technology demonstrates a measured DNL and INL within 0.78LSB and 2.24LSB, and shows a maximum SNDR and SFDR of 60dB and 70dB in versionl, and 63dB and 75dB in version2 at 1kS/s. The versionl and version2 ADCs with an active die area of $0.78mm^2$ and $0.81mm^2$ consume 0.163mW and 0.176mW at 1kS/s and 2.5V, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.443-447
• /
• 2003

In this work. using 0.2 GaAs modulation doped FET(MODFET), a high performance DBS downconverter MMIC was developed for direct broadcasting satellite (DBS) application. Without LNA, the downconverter MMIC showed a very low noise of 4.8 dB, which is lower by 3 dB than conventional ones. A low LO power of -10 dBm was required for the normal DBS operation of the downconverter MMIC. which reduced the power consumption via a removal of LO amplifier on MMIC. It required only a low power consumption of 175 mW, which is lower than 70 percent of conventional ones. The LO leakage power at IF output was suppressed to a lower level than 30 dBm, which removes a bulky LO rejection filter on a board. The fabricated chip, which include a mixer, If amplifiers. LO rejection filter, and active balun, exhibited a small size of $0.84{\times}0.9\textrm{mm}^2$.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.55-66
• /
• 2016

Purpose - This article aims to explore the characteristics of disaster risk distribution information in China. Also, this research attempts to analyze the findings of risk communication using case study in chronological order in terms of social amplification of risk. To achieve the purpose, the paper reviews the trends and issues of risk communication in China, with an emphasis on examining earthquakes by a chronological approach. In these regards, we hope that some relevant findings from this empirical study with cases will be able to enhance national risk communication and provide implications in Korea as well. Research design, data, and methodology - The conceptual framework of this study is theoretically based on the risk amplification model, which describes signals about risk transmitted and processed by individuals and social groups. The social amplification of risk also reflects the interactions of social groups about disaster-related risk issues, which are potential amplifiers or attenuators of communication signals. The key concept of social amplification implies that the risks pertaining to natural disasters interact with social, psychological, institutional, and cultural processes in ways that can affect public perceptions of risk. SMCRE Model is methodologically employed to examine risk communication history of China with the focus on natural disaster. Four earthquakes are selected to figure out the chronological characteristics of risk communication since 1970s. He bei Tang Shan earthquake is selected as an example disaster before 1990's, while the earthquake in Yun Nan Jiang is explored for the case study of 1990's. The earthquake in Si Chuan Wen Chuan is also examined as a example disaster of 2000's. The recent earthquake in Si Chuan Ya An Lu Shan is selected as a case of 2010s. Results - SMCRE model in this case study is operationally defined as a methodology and applied to the four earthquakes occurred in China. SMCRE model describes the exchange of risk information and is also applied to all forms of communication between stake holders. Each factor of risk communication includes source, message, channel, receiver and effect. It is notable that a big progress has been made on disaster risk communication in China for the past 40 years. We also found that highly developed information technology has enabled Chinese society to better cope with natural disaster, leading to enhanced disaster risk communication. It is mainly found from case study that the disaster risk communication of China has been involved with political situation, which derived from the change of government for the past 40 years. Conclusion - From this historical research, it can be inferred that the policies and politics of Chinese leaders have had a more critical role to play in the process of source of risk communication than those of any other countries. The results of this paper also support that the effective risk communication involves not only the improved reliability of local government as a key factor of disaster risk communication, but also is accompanied by international cooperation for substantial collaboration with stake holders.