• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.162-167
• /
• 1991

In an attempt to explore the mechanistic aspects of chilling injury in plants and their defensive measures against the low temperature stress, the time sequential measurements of pyruvate, superoxide radicals$(O_{\overline{2}})$ and antioxygenic enzymes during whole period of injury-inducing treatment were performed using mostly rice seedlings. Pyruvate was substantialy accumulated in leaf tissues during the exposure period to $5^{\circ}C$ of the seedlings ; the relative extent of the accumulation was increased with increasing time of the cold treatment. When the cold-treated plants were translocated to ambient temperature$({\sim}25^{\circ}C)$, the accumulation started to dissipate, concomitantly accompaning a remarkable increase in the $O_{\overline{2}}$ level of tissues. Superoxide dismutase(SOD) and catalase were also activated during post-chilling period, although they showed a considerable lag time for activation. In contrast, glutathione peroxidase, another antioxygenic enzyme in cells, was not activated at all by preceding cold treatment of plants. The uptake of exogenous $O_{\overline{2}}$ by the roots of rice seedlings resulted in increase in the activities of SOD and catalase in root tissues. The supply of $H_2O_2$ to plan st brought about the activation of catalase in situ, while failing to exert any effect on the activation state of glutathione peroxidase. The results obtained in this work suggest that pyruvate accumulation in cells is the direct cause of the overproduction of $O_{\overline{2}}$ and thereby other toxic activated oxygen species, and that SOD and catalase may play a crucial role in the protection of plant cells against active oxygen-mediated chilling injury.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.2
• /
• pp.39-47
• /
• 2018

This study was carried out to investigate the applicability of alternating temperature control during night time in a nursery seedling production. Three groups of samples were exposed to three different environmental conditions for 6 days from 18:00 to 09:00; one was constantly 15 ℃, another was alternating between 15 ℃ for 2 hours and 11 ℃ for 2 hours, and the other was alternating between 15 ℃ for 2 hours and 11 ℃ for 4 hours. Leaf temperature and stem temperature was measured in real time. The influence of cold stress was analyzed by flavonoid content and growth of tomato seedling. The temperature of leaves and stem became equal to the ambient temperature over time, furthermore, there was no significant difference among the treatments. In conclusion, it is considered that heating costs can be saved considerably, as the alternating temperature has fewer effects on cold stress reaction by tomato seedling growth.

• Journal of the Korean Society of Food Culture
• /
• v.16 no.2
• /
• pp.109-117
• /
• 2001

Judging from the studies carried out by Dr. Jo, Yong Jin on the Koreans' faces, Koreans divided into two constitutions according to their facial features and heritages. The one population is the Northern lineage whose ancestor migrated from Siberia in ice age. In order to survive in cold climate, they have developed a high level of metabolic heat production. Cold adaptation for preventing heat loss results in a reduction in the facial surface area with small eyes, nose and lips. The other population is the Southern lineage who is the descent of native in Korean peninsular. They have big eyes with double edged eyelids, broad nose and thick lips. It is generally believed that both genetic and environmetal factors influence eating behaviors. Although we can't recognized their heritage that may contribute to the metabolism and eating behavior, we commonly recognize their physiological heritage acceding to their facial features. In order to investigate the relationship among the size and shape of facial feature, the eating behavior, anthropometric measurement in female college students, the eating behaviors was measured during an instant-noodle lunch eaten in a laboratory setting at the ambient temperature of $23^{\circ}C$. The anterior surface area of left eye and length of right eye were positively correlated with the difference between the peak postprandial and the meal-start core temperature. The surface area of lower lip also negatively correlated with the meal-start core temperature and meal duration. In addition, the total lips' area was positively correlated with the difference between the peak postprandial and the meal-start core temperature and negatively correlated with the meal duration. However anthropometric measurements were not related with the size of facial features.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.649-655
• /
• 2005

Automotive exhaust is suspected to be one of the main reasons of the rapid increase in greenhouse effect gases in ambient air. Although methane emissions are generally orders of magnitude lower than emissions of $CO_{2}$, the global warming potential (GWP) of methane is greater than that of $CO_{2}$. The environmental impact of methane emissions from vehicles is negligible and is likely to remain so for the foreseeable future. In this study, in order to investigate greenhouse gas emission characteristics from gasoline passenger cars, 20 vehicles were tested on the chassis dynamometer and methane emissions were measured. The emission characteristics by model year, mileage, vehicle speed were discussed. Test mode is CVS-15 mode that have been used to regulate for light-duty vehicle in Korea. It was found that $CH_{4}$ emissions showed higher for cold start, old model year and long mileage than hot start, new model year and short mileage, respectively. These results were compared with IPCC emission factors and the overall our results were anticipated to contribute for domestic greenhouse gas emissions calculation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.104-104
• /
• 2011

The fuel economy estimates essentially serve two purposes : to provide consumers with a basis on which to compare the fuel economy of different vehicles, and to provide consumers with a reasonable estimate of the range of fuel economy they can expect to achieve. The current fuel economy label values utilize measured fuel economy over city driving cycles. However, this test driving mode can not be evaluated the variety factor of the real-world. These factors include differences between the way vehicles are driven on the road and over the test cycles, air conditioning use, widely varying ambient temperature and humidity, widely varying trip lengths, wind, precipitation, rough road conditions, hills, etc. The purpose of this paper is to account for three of these factors on the fuel economy : 1) on-road driving patterns (i.e. higher speeds and more aggressive driving (higher acceleration rates)), 2) air conditioning, and 3) colder temperatures. The new test methods will bring into the fuel economy estimates the test results from the five emissions tests in place today : CVS-75, HWFET, US06, SC03 and Cold CVS-75. Based on these new test methods, this paper discusses the characteristics of driving condition on Hybrid electric vehicle (HEV). And this paper assesses the fuel economy label of HEV.

• Korean Journal of Plant Resources
• /
• v.31 no.6
• /
• pp.591-596
• /
• 2018

This study was conducted to develop gibberellin treatment technique to enhance flower initiation in Aquilegia japonica Nakai & H. Hara. Seedlings were planted in 12cm-diameter pots on October 2016 and grown in green house. Ambient temperature in the green house was set at minimum $15^{\circ}C$ during day and night to suppress flower initiation at cold temperature condition. Two different types of gibberellin, $GA_3$ and $GA_{4+7}$, at 4 different concentration levels 100, 200, 400 and 600 mg/L, were tested in this study. Gibberellin was sprayed first at planting and secondly at 1-week after planting. Ten to fifteen ml of gibberellin was sprayed for each pot. Plant height and petiole length were elongated by both gibberellin types, flowering was more enhanced by $GA_3$ (91.7~100%) compared to of $GA_{4+7}$. However, abnormal flower was less observed in $GA_3$ treatment (0~16.7%) than $GA_{4+7}$. Number of flower stalks per plant ranged from 1.9 to 2.5. Number of flowers per plant ranged from 6.8 to 10.3. Differences in flowering characteristics between treatments were statistically significant. Optimal gibberellin treatment to enhance flower initiation in A. japonica Nakai & H. Hara substituting cold treatment was $GA_3$ at the concentration between 400 mg/L to 600 mg/L.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.439-446
• /
• 2023

Changes in the microstructure and mechanical properties of as-roll-bonded AA6061/AA5052/AA1050 three-layered sheet with increasing annealing temperature were investigated in detail. The commercial AA6061, AA5052 and AA1050 sheets with 2 mm thickness were roll-bonded by multi-pass rolling at ambient temperature. The roll-bonded Al sheets were then annealed for 1 h at various temperatures from 200 to 400 ℃. The specimens annealed up to 250 ℃ showed a typical deformation structure where the grains are elongated in the rolling direction in all regions. However, after annealing at 300 ℃, while AA6061 and AA1050 regions still retained the deformation structure, but AA5052 region changed into complete recrystallization. For all the annealed materials, the fraction of high angle grain boundaries was lower than that of low angle grain boundaries. In addition, while the rolling texture of the {110}<112> and {123}<634> components strongly developed in the AA6061 and AA1050 regions, in the AA5052 region the recrystallization texture of the {100}<001> component developed. After annealing at 350 ℃ the recrystallization texture developed in all regions. The as-rolled material exhibited a relatively high tensile strength of 282 MPa and elongation of 18 %. However, the tensile strength decreased and the elongation increased gradually with the increase in annealing temperature. The changes in mechanical properties with increasing annealing temperature were compared with those of other three-layered Al sheets fabricated in previous studies.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.3
• /
• pp.77-82
• /
• 2008

For heat pumps used in a cold region, it is very important to obtain appropriate heating capacity. Several studies using a variable speed compressor and an additional heater have been performed to enhance heating capacity at low ambient temperatures. However, for outdoor temperature conditions below $-15^{\circ}C$, it is still difficult to obtain enough heating capacity above the rated value. In recent studies, the application of gas injection technique into a two-stage heat pump yielded noticeable heating performance improvement at low temperature conditions. In this study, the heating performance of a two-stage gas injection heat pump with a rated capacity of 3.5 kW was measured and analyzed by varying refrigerant charge amount and EEV opening at the standard heating condition. The heating performance of the two-stage gas injection heat pump was compared with that of a two-stage non-injection heat pump. The heating capacity and COP of the two-stage gas injection heat pump were improved by 2-10% at the optimal charging condition over those of the two-stage non-injection heat pump.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1953-1958
• /
• 2007

This paper presents the results of a series of performance tests for the integral Stirling cryocooler. Infrared sensor systems incorporating cryocoolers are required to be qualified to the appropriate environmental specification. Integral Stirling cryocooler for thermal imaging system have matured to the stage of undergoing formal qualification test program. The thermal environmental test of the Stirling cryocooler is presented in this paper. We performed that low and high temperature keeping test from $-40^{\circ}C$ to $+71^{\circ}C$ and operating test at high and low temperature cyclic range with acceptance tests performed at scheduled intervals. Cooldown time to 80K and steady state input power at 80K were determined as a function of cooler components temperatures at the compressor, hot end and cold tip. Tests performed on this cooler have been successful with a measured cooldown time to 80K of less than 5 minutes 24seconds for $71^{\circ}C$ ambient temperature with input power of 11W

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.9-14
• /
• 2016

This study has been carried out to develop TM (Thermal to Mechanical) conversion systems for electric power generation using one of the Low Temperature Differential (LTD) Stirling engines called MM-7 capable of harnessing low temperature waste heat whose temperature is only $20{\sim}30^{\circ}C$ above the ambient. Measurements were made on the torque and rpm for a number of temperature differentials between the engine hot and cold ends, which could be effectively applied in developing the most suitable configuration for the high performance TM (Thermal to Mechanical) conversion system.