• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.113-125
• /
• 2008

This paper presents a model for designing cellular manufacturing systems (CMS) by integrating system cost, machine reliability, and preventive maintenance (PM) planning. In a CMS, a part is processed using alternative process routes, each consisting of a sequence of visits to machines. Thus, a level of 'system reliability' is associated with the machines along the process route assigned to a part type. Assuming machine reliabilities to follow the Weibull distribution, the model assigns the machines to cells, and selects, for each part type, a process route which maximizes the overall system reliability and minimizes the total costs of manufacturing operations, machine underutilization, and inter-cell material handling. The model also incorporates a reliability based PM plan and an algorithm to implement the plan. The algorithm determines effective PM intervals for the CMS machines based on a group maintenance policy and thus minimizes the maintenance costs subject to acceptable machine reliability thresholds. The model is a large mixed integer linear program, and is solved using LINGO. The results point out that integrating PM in the CMS design improves the overall system reliability markedly, and reduces the total costs significantly.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1497-1502
• /
• 2013

Recently, the junctionless (JL) transistors realized by a single-type doping process have attracted attention instead of the conventional metal-oxide-semiconductor field-effect transistors (MOSFET). The JL transistor can overcome MOSFET's problems such as the thermal budget and short-channel effect. Thus, the JL transistor is considered as great alternative device for a next generation low standby power silicon system. In this paper, the JL FinFET was simulated with a three dimensional (3D) technology computer-aided design (TCAD) simulator and optimized for DC characteristics according to device dimension and doping concentration. The design variables were the fin width ($W_{fin}$), fin height ($H_{fin}$), and doping concentration ($D_{ch}$). After the optimization of DC characteristics, RF characteristics of JL FinFET were also extracted.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.1
• /
• pp.67-72
• /
• 2009

User Requirements are analyzed and quantified by decision making models and system engineering methods to select alternative concepts which satisfy the various requirements. In this study, the design concepts for guided missile are derived using Quality Function Deployment(QFD) and Analytic Hierarchy Process(AHP). The design alternatives that satisfy the user requirements are extracted by QFD and Morphological Matrix, then the best design concept are obtained using AHP and Pugh concept Selection.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.18 no.3
• /
• pp.1-12
• /
• 1993

Several alternative manufacturing control strategies are under study in the literature. They are, specifically, push system, pull system, conwip system, and as a special case, infinite buffer system. We focus on modeling, comparison analysis and design of these systems. The event epoch sequences of each system are generated which also enable us to compare their performance. Then the stochastic monotonicity of these enent epoch sequences in several important design parameters are established through the structure of the generalized semi-Markov schemes on which they are based. Finally, we solve the stochastic optimization problem which minimizes these event epochs. Our results supplement the applicability of some previously known results in the literature.

• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.1
• /
• pp.17-32
• /
• 2014

The trade-off studies in the concept development stage to assess the relative goodness of alternative systems concepts for AE (architect engineering) design for the Barge Mounted SMR (BMSMR) is introduced. With respect to design margin, system performance, schedule and risk, the design selection is cond ucted using the following characteristics; barge mobility, system safety under the natural disaster (seismic), power output, interfacing with the other system, and the additional supporting functions as desalination. There are three findings that should be remedied; deficiencies in the assumed characteristics of the system being modeled, deficiencies in the test model, and excessively stringent system requirements. This study is performed using systems engineering approach with trade off matrix method. In order to execute this work, concept development stage is divided into three (3) phases as NA (needs analysis), CE (concept exploration), and CD (concept definition).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.224-229
• /
• 2008

With the wide use of mobile phones, a paging signal by a sound transducer acts as an environmental noise on many occasions, thus necessitating an alternative paging signal by a vibration motor. Conventional vibration motors employ three-phase windings with mechanical brushes for commutation. In this paper, a new one-phase brushless and sensorless vibration motor is introduced utilizing digital signal processor chips in cell-phones. For electromagnetic field analysis, two-dimensional modeling can be implemented to determine the back electromotive force using axisymmetric boundary conditions. Geometric design parameters, such as coil pitch and magnet pitch. are considered for performance optimization. Through the experiments, it is shown that the proposed design has the equivalent performance with reduced number of parts, thus enhancing manufacturing productivity and reducing manufacturing cost.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.480-486
• /
• 2003

Due to rapid computerization of many consumer electric products, user interface of digital products comes an important issue for the user satisfaction. Although Menu Driven Interface are frequently employed for user interfaces on many digital products, there still exists many problems. This study attempts to apply to usability guideline digital camera through the review. And the study also an alternative devises design for digital product menu interface. The general type design guidelines include menu depth/breadth, information architecture, categorize and consistency among design components.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.433-438
• /
• 2003

Structural steel/composite beams provide a viable alternative for coupling individual reinforced concrete wall piers. Well-established guidelines for shear links in eccentrically braced steel frames form the basis of current design guidelines. However, these provisions ignore the effects of nominally reinforced concrete encasement which typically surrounds the coupling beam, and are based on overly conservative assumed deformation demand. A coordinated analytical research program at here has focused on response of steel/composite coupling beams, their connections to reinforced concrete walls, and overall behavior of composite coupled wall systems. Using the results from this study, guidelines for proper design and detailing of steel/composite coupling beams and beam-wall connections have been developed. This paper summarizes the research program, and highlights the basic concepts, important findings, and recommendations.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.6
• /
• pp.1401-1408
• /
• 2013

Kim and Kim (1992) proposed typical nonparametric method for umbrella alternative in randomized block design with replications. In this paper, We consider a test procedure for umbrella alternatives in a randomized block design using extension of the two sample placement tests described in Orban and Wolfe (1982) and treatment tests described in Kim (1999). We perform a Monte Carlo study to compare the empirical powers of the test statistics for underlying distributions.

• Korean Institute of Interior Design Journal
• /
• no.4
• /
• pp.53-60
• /
• 1995

Recently, much attention is paid on the office design be-cause the real world of work has undergone substantial changes, in both spatial and temporal aspects, due to the in-troduction of data processing technologies and new types of production. Today's renewed objectives of office are to define new physical space for work, to deal with economic and organizational changes. In the period of information, the purpose of an office is to improve the productivity for employers employees the comfort and vitality. Today's intellecture resources are necessary for the development in the modern business. The Hypid office, as an alternative in order to correspond the rapid changes, is proposed to give the space for satisfy-ing the basic desires of a human being-eating, resting and working. Accompanying with flexibility and comfortability, this office should include the space for personal purpose and the space for social purpose. Applying the concept of comfort like at home leads to re-lease a worker's stress from the society of information. The future office which is to enhance the quality of culture by in-tegrating indivisual, domestic and social life should commu-nicate efficiency, movement, energy, transformation.