• Journal of applied mathematics & informatics
• /
• 제33권1_2호
• /
• pp.33-44
• /
• 2015

The convergence rate of a numerical procedure based on Schwarz Alternating Method(SAM) for solving elliptic boundary value problems depends on the selection of the interface conditions applied on the interior boundaries of the overlapping subdomains. It has been observed that the Robin condition (mixed interface condition), controlled by a parameter, can optimize SAM's convergence rate. In [7], one formulated the multi-parameterized SAM and determined the optimal values of the multi-parameters to produce the best convergence rate for one-dimensional elliptic boundary value problems. Two-dimensional implementation was presented in [8]. In this paper, we present an implementation for three-dimensional problem.

• Journal of applied mathematics & informatics
• /
• 제9권1호
• /
• pp.101-124
• /
• 2002

The convergence rate of a numerical procedure barred on Schwarz Alternating Method (SAM) for solving elliptic boundary value problems (BVP's) depends on the selection of the interface conditions applied on the interior boundaries of the overlapping subdomains. It hee been observed that the Robin condition(mixed interface condition), controlled by a parameter, can optimize SAM's convergence rate. Since the convergence rate is very sensitive to the parameter, Tang[17] suggested another interface condition called over-determined interface condition. Based on the over-determined interface condition, we formulate the two-layer multi-parameterized SAM. For the SAM and the one-dimensional elliptic model BVP's, we determine analytically the optimal values of the parameters. For the two-dimensional elliptic BVP's , we also formulate the two-layer multi-parameterized SAM and suggest a choice of multi-parameter to produce good convergence rate .

• 대한의생명과학회지
• /
• 제27권2호
• /
• pp.99-104
• /
• 2021

Treatment techniques that affect homeostasis by non-invasive regulation in peripheral organs will advance disease research. Here, we demonstrate a non-invasive method of conditioning within an organ using a low-frequency stimulator superposition of alternating microcurrent wave in stages. It is first applied to the inflammatory response in H3N2-infected sinusitis mice. To check the progress of the treatment, mice were sacrificed every week for 3 weeks, nasal tissue was removed, and the inflammatory response was investigated through H & E staining. The low-frequency stimulation treatment group was found to alleviate the proliferation of epithelial cells and invasion of inflammatory cells compared to the control group as the passage of treatment time. The reduction of inflammatory cytokines in the nasal lavage fluid was observed in H3N2-infected sinusitis mice treated with of low-frequency stimulation using superposition of alternating microcurrent wave compared to H3N2-infected sinusitis mice after 3 weeks. These data demonstrate that low-frequency stimulation device in the form of using alternating current wave superposition on within organs provides a new method to regulate specific physiological functions. Therefore, it is necessary to prove the inhibitory effect of low-frequency stimulation using alternating current wave superposition on inflammatory diseases by various methods through further studies and clinical studies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1431-1432
• /
• 2013

• Macromolecular Research
• /
• 제11권6호
• /
• pp.437-443
• /
• 2003

A series of alternating and alternating block copolycarbonates containing the constituent groups of polysulfone was synthesized through a multi-step solution condensation method. For the regulation of block length, monodisperse oligomers were prepared by using a large excess of the bisphenols and were subsequently incorporated into the copolymer chains. Separating the unreacted bisphenols from the oligomers by dissolution/precipitation steps took advantage of solubility differences. The structures of the monomers, oligomers, and copolymers were characterized and confirmed by GPC, NMR spectroscopy, mass spectrometry, and elemental analysis. Monodispersity of the oligomers, which is critical for control over the block length in the copolymers, was confirmed by GPC and mass spectrometry. Of the two constituent groups of the polysulfone, the sulfone linkage stiffens the polycarbonate copolymer chain, while the ether linkage softens it.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.111-114
• /
• 2003

In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature ($T_{c,zero}$ : 90 K) and critical current density ($2354\;A/cm^2$). Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.9-17
• /
• 2001

A numerical study has been carried out on the evolution of the particle size distribution for unipolar charged particles that experience coagulation in an alternating electric field. The collision frequency function of charged particles was analytically derived. The log-normal size distribution function is utilized for representing a poly-disperse size distribution and the moments of the particle size distribution are used to solve the general dynamic equation considering only AC electric force effect. The results are compared with the effects of brownian coagulation.

• 한국게임학회 논문지
• /
• 제10권4호
• /
• pp.81-90
• /
• 2010

본 논문에서는 측정된 양방향 반사 분포 함수(BRDF)와 같은 데이터 없이 사실적인 직물 표면 렌더링이 가능한 효율적인 방법을 제안한다. 제안된 기법은 광선 추적 기반의 오프라인 렌더러와 게임과 같은 실시간 응용에 모두 적용할 수 있다. 제안된 기법은 교호적(alternating) 이방성 반사와 변형된 미세면 분포 함수를 이용하여 직조 표면을 표현한다. 실에 대한 절차적 모델링은 직물의 표면을 효과적이며 효율적으로 표현할 수 있게 한다. 실험결과는 제안된 기법을 통해 상호작용적 응용에서도 다양한 직조물 표면을 사실적으로 렌더링할 수 있음을 보이고 있다.

• 전기전자학회논문지
• /
• 제19권3호
• /
• pp.366-370
• /
• 2015

본 논문에서는 배터리 교대 방전 기법에서 배터리 셀의 방전 시간을 밸런싱함으로서 배터리 사용 시간을 크게 높이는 방법을 제안한다. 기존 기법에서는 다수의 배터리 셀을 교대로 방전시킴으로서 배터리에 회복 효과를 발생시키고, 이를 통해 배터리 사용 시간을 연장한다. 이때, 시스템에 공급되는 전원이 차단되지 않도록 배터리 셀이 동시에 켜지는 시간 구간이 있는데, 배터리 셀의 전압 차이로 인해 여러 가지 문제가 발생한다. 이러한 문제를 해결하기 위해서 배터리 셀이 가능한 한 균등한 전압을 가지도록 배터리의 방전 시간을 제어한다. 실험 결과, 제안하는 방법에서 배터리 사용 시간이 19.2% 연장되었다.

• 한국진공학회지
• /
• 제14권1호
• /
• pp.24-28
• /
• 2005

a-Si을 poly-Si으로 결정화하는 전형적인 방법으로는 고상결정화(Solid Phase Crystallization, SPC)가 있다［1-3］. 고상결정화는 균일한 공정특성과 생산비가 저렴하다는 장점이 있으나, 고상결정화 공정에서 높은 공정온도와 긴 공정 시간은 유리 기판의 손상으로 인해 적용되기 어렵다. 본 논문에서는 고상결정화의 저온공정과 짧은 공정시간을 위해 교번자장결정화(Alternating Magnetic Field Crystallization, AMFC) 시스템 내에서 결정화하는 동안 교번자장(Alternating Magnetic Field)을 적용하는 새로운 방법을 소개한다. 고상결정화의 경우, 열처리 시간은 570℃에서 24시간이 소요되었으나, 교번자장결정화의 경우, 같은 온도에서 20분이 소요되었다.