• 제목/요약/키워드: alpha-dual

검색결과 140건 처리시간 0.023초

ON MULTIPLIERS ON BOOLEAN ALGEBRAS

  • Kim, Kyung Ho
    • 충청수학회지
    • /
    • 제29권4호
    • /
    • pp.613-629
    • /
    • 2016
  • In this paper, we introduced the notion of multiplier of Boolean algebras and discuss related properties between multipliers and special mappings, like dual closures, homomorphisms on B. We introduce the notions of xed set $Fix_f(X)$ and normal ideal and obtain interconnection between multipliers and $Fix_f(B)$. Also, we introduce the special multiplier ${\alpha}_p$a nd study some properties. Finally, we show that if B is a Boolean algebra, then the set of all multipliers of B is also a Boolean algebra.

LITTLEWOOD-PALEY TYPE ESTIMATES FOR BESOV SPACES ON A CUBE BY WAVELET COEFFLCIENTS

  • Kim, Dai-Gyoung
    • 대한수학회지
    • /
    • 제36권6호
    • /
    • pp.1075-1090
    • /
    • 1999
  • This paper deals with Littlewood-Paley type estimates of the Besov spaces {{{{ { B}`_{p,q } ^{$\alpha$ } }}}} on the d-dimensional unit cube for 0< p,q<$\infty$ by two certain classes. These classes are including biorthogonal wavelet systems or dual multiscale systems but not necessarily obtained as the dilates or translates of certain fixed functions. The main assumptions are local supports of both classes, sufficient smoothness for one class, and sufficiently many vanishing moments for the other class. With these estimates, we characterize the Besov spaces by coefficient norms of decompositions with respect to biorthogonal wavelet systems on the cube.

  • PDF

흰쥐 후지근 피판에서 허혈-재순환 손상시 pERK1/2 발현에 대한 ${\alpha}-lipoic$ Acid의 효과 (Effect of ${\alpha}-Lipoic$ Acid on Expression of pERK1/2 following Ischemia-Reperfusion Injury in the Hindlimb Muscle Flap of Rats)

  • 송정훈;김민선;박병림;박한수;채정룡;이혜미;나영천
    • Archives of Reconstructive Microsurgery
    • /
    • 제14권2호
    • /
    • pp.85-94
    • /
    • 2005
  • Purpose: This study was to evaluate the effect of ${\alpha}-lipoic$ acid, a potent free radical scavenger, on the expression of active form of extracellular signal-regulated kinase (pERK1/2) proteins from hindlimb muscles of rats following ischemia-reperfusion injury. Material and methods: 64 health, $280{\sim}350\;g$ weighted Sprague-Dawley male rats were used. In order to make a muscle flap, the gastrocnemius (GC) and soleus (SOL) muscles were dissected and elevated. The popliteal artery was occluded for 4hours and reperfused for 10 minutes, 30 minutes, 1 hour, 2 hours and 4 hours, respectively. Results: The ischemia by occlusion of the popliteal artery itself caused a minimal change in expression of phosphorylated form of proteins observed in hindlimb muscle. In contrast, after 4 hours of ischemia, immunoreactivity for pERK1/2 in the GC muscle showed dual peaks at 10 minutes and 4 hours after reperfusion. In ${\alpha}-lipoic$ acid treated group, the expression of pERK1/2 was increased significantly compared to I/R-only group. Conclusion: These results suggest that ${\alpha}-lipoic$ acid may protect I/R injury of the skeletal muscle through free radical scavening and activation of intracellular pERK1/2 expression.

  • PDF

SOA-Integrated Dual-Mode Laser and PIN-Photodiode for Compact CW Terahertz System

  • Lee, Eui Su;Kim, Namje;Han, Sang-Pil;Lee, Donghun;Lee, Won-Hui;Moon, Kiwon;Lee, Il-Min;Shin, Jun-Hwan;Park, Kyung Hyun
    • ETRI Journal
    • /
    • 제38권4호
    • /
    • pp.665-674
    • /
    • 2016
  • We designed and fabricated a semiconductor optical amplifier-integrated dual-mode laser (SOA-DML) as a compact and widely tunable continuous-wave terahertz (CW THz) beat source, and a pin-photodiode (pin-PD) integrated with a log-periodic planar antenna as a CW THz emitter. The SOA-DML chip consists of two distributed feedback lasers, a phase section for a tunable beat source, an amplifier, and a tapered spot-size converter for high output power and fiber-coupling efficiency. The SOA-DML module exhibits an output power of more than 15 dBm and clear four-wave mixing throughout the entire tuning range. Using integrated micro-heaters, we were able to tune the optical beat frequency from 380 GHz to 1,120 GHz. In addition, the effect of benzocyclobutene polymer in the antenna design of a pin-PD was considered. Furthermore, a dual active photodiode (PD) for high output power was designed, resulting in a 1.7-fold increase in efficiency compared with a single active PD at 220 GHz. Finally, herein we successfully show the feasibility of the CW THz system by demonstrating THz frequency-domain spectroscopy of an ${\alpha}$-lactose pellet using the modularized SOA-DML and a PD emitter.

Degree of conversion of two dual-cured resin cements light-irradiated through zirconia ceramic disks

  • Kim, Min-Jeong;Kim, Kyo-Han;Kim, Young-Kyung;Kwon, Tae-Yub
    • The Journal of Advanced Prosthodontics
    • /
    • 제5권4호
    • /
    • pp.464-470
    • /
    • 2013
  • PURPOSE. The aim of this Fourier transform infrared (FTIR) spectroscopic study was to measure the degree of conversion (DC) of dual-cured resin cements light-irradiated through zirconia ceramic disks with different thicknesses using various light-curing methods. MATERIALS AND METHODS. Zirconia ceramic disks (KT12) with three different thicknesses (1.0, 2.0, and 4.0 mm) were prepared. The light transmittance of the disks was measured using ultraviolet visible near-infrared spectroscopy. Four different light-curing protocols were used by combining two curing light modes (Elipar TriLight (standard mode) and bluephase G2 (high power mode)) with light-exposure times of 40 and 120 seconds. The DCs of the two dual-cured resin cements (Duo-Link and Panavia F2.0) light-irradiated through the disks was analyzed at three time intervals (3, 7, and 10 minutes) by FTIR spectroscopy. The data was analyzed using repeated measures ANOVA (${\alpha}$=.05).Two-way ANOVA and Tukey post hoc test were used to analyze the 10 minute DC results. RESULTS. The 1.0 mm thick disk exhibited low light transmittance (<25%), and the transmittance decreased considerably with increasing disk thickness. All groups exhibited significantly higher 10 minute DC values than the 3 or 7 minute values (P<.05), but some exceptions were observed in Duo-Link. Two-way ANOVA revealed that the influence of the zirconia disk thickness on the 10 minute DC was dependent on the light-curing methods (P<.001). This finding was still valid even at 4.0 mm thickness, where substantial light attenuation took place. CONCLUSION. The curing of the dual-cured resin cements was affected significantly by the light-curing technique, even though the additional chemical polymerization mechanism worked effectively.

대구광역시에 거주하는 맞벌이부부의 일-가족조정전략이 일-가족 갈등과 일-가족 향상에 미치는 영향 (The influences of work-family conciliation strategies on work-family conflict and enrichment in dual-earner couples who live in Daegu with children)

  • 장윤옥;정서린
    • 가족자원경영과 정책
    • /
    • 제21권2호
    • /
    • pp.73-93
    • /
    • 2017
  • The purpose of this study was to investigate the influences of work-family conciliation strategies on work-family conflict and enrichment in dual-earner couples who live in Daegu with children. The subjects of this study were 176 dual-earner couples, who have under 16 youngest children and work over 15 hours each week. The research tool was questionnaires. For data analysis, factor analysis, Cronbach ${\alpha}$, paired t-test and multiple regression were performed. The main results of this study were as following. First, there were significant differences in management and planning skill strategy, work-family conflict and enrichment according to gender. Second, positive attitudes strategy toward multiple responsibilities, wives use, had an influence on work${\rightarrow}$family conflict in wives. Also, partner coping, management and planning skill, and positive attitudes strategy, wives use, and management and planning skill strategy, husbands use, had an influence on family${\rightarrow}$work conflict in wives. And management and planning skill and professional adjustment strategy, husbands use, had an influence on family${\rightarrow}$work conflict in husbands. work-family conciliation strategies had no influence on work${\rightarrow}$family conflict. Third, positive attitudes strategy toward multiple responsibilities, wives use, had an influence on work${\rightarrow}$family enrichment in wives. Also, partner coping strategy, wives use, and management and planning skill strategy, husbands use, had an influence on family${\rightarrow}$work enrichment in wives. And positive attitudes strategy toward multiple responsibilities, husbands use, had an influence on work${\rightarrow}$family enrichment in husbands. Also management and planning skill strategy, wives use, and partner coping, professional adjustment and management and planning skill strategy had an influence on family${\rightarrow}$work enrichment in husbands.

Effect of solution temperature on the mechanical properties of dual-cure resin cements

  • Kang, En-Sook;Jeon, Yeong-Chan;Jeong, Chang-Mo;Huh, Jung-Bo;Yun, Mi-Jung;Kwon, Yong-Hoon
    • The Journal of Advanced Prosthodontics
    • /
    • 제5권2호
    • /
    • pp.133-139
    • /
    • 2013
  • PURPOSE. This study was to evaluate the effect of the solution temperature on the mechanical properties of dualcure resin cements. MATERIALS AND METHODS. For the study, five dual-cure resin cements were chosen and light cured. To evaluate the effect of temperature on the specimens, the light-cured specimens were immersed in deionized water at three different temperatures (4, 37 and $60^{\circ}C$) for 7 days. The control specimens were aged in a $37^{\circ}C$ dry and dark chamber for 24 hours. The mechanical properties of the light-cured specimens were evaluated using the Vickers hardness test, three-point bending test, and compression test, respectively. Both flexural and compressive properties were evaluated using a universal testing machine. The data were analyzed using a two way ANOVA with Tukey test to perform multiple comparisons (${\alpha}$=0.05). RESULTS. After immersion, the specimens showed significantly different microhardness, flexural, and compressive properties compared to the control case regardless of solution temperatures. Depending on the resin brand, the microhardness difference between the top and bottom surfaces ranged approximately 3.3-12.2%. Among the specimens, BisCem and Calibra showed the highest and lowest decrease of flexural strength, respectively. Also, Calibra and Multilink Automix showed the highest and lowest decrease of compressive strength, respectively compared to the control case. CONCLUSION. The examined dual-cure resin cements had compatible flexural and compressive properties with most methacrylate-based composite resins and the underlying dentin regardless of solution temperature. However, the effect of the solution temperature on the mechanical properties was not consistent and depended more on the resin brand.