• Journal of Chest Surgery
• /
• v.20 no.1
• /
• pp.161-170
• /
• 1987

Fifty-nine cases of congenital chest wall defects experienced in the department of thoracic surgery of Seoul National University Hospital were analyzed and the relevant literatures were reviewed. They are 52 cases of funnel chest, 3 cases of pigeon breast, one case of superior sternal fissure, one case of costochondral incurvation, one case of Cantrell`s pentalogy, and one case of Poland`s syndrome. Funnel chest affected males more frequently than females by 44 to 8. All of the funnel deformities were corrected by Ravitch operation or its modification except one which was the first case of this series and was corrected by a sterno-turnover. Two cases required a mechanical ventilation for 3 days and 5 days respectively. Four minor complications which were two cases of skin wound infection and 2 cases of fluid accumulation were noted. Skin would infection was repaired by a secondary closure and fluid accumulation was treated by aspiration only. The result are all excellent without recurrence or reoperation. In 3 cases of pigeon breast, they were treated by subperichondrial resection of all of the involved costal cartilages and shortening their course with reefing sutures in the perichondrium with excellent result. The superior sternal fissure which was combined by a ventricular septal defect was treated by a simple wire closure with a good result. The costochondral incurvation was corrected by subperichondrial resection of deformed cartilages and a rib graft removed from the contralateral normal side. The Poland syndrome and the Cantrell`s pentalogy was already presented previously.

• Journal of Chest Surgery
• /
• v.28 no.1
• /
• pp.31-36
• /
• 1995

Between January 1984 to June 1994, fourteen patients from 37 to 80 years of age [mean 66.42 11.71 years of age have undergone surgical treatment of abdominal aortic aneurysm in Kyung Hee Univ. Hospital. There were 11 males and 3 female patients. All but one were infra-renal type. The etiology of the aneurysm consisted of twelve atherosclerotic, one inflammatory and one traumatic abdominal aortic aneurysm.Two patients were operated on for ruptured abdominal aortic aneurysm. We performed dacron graft interposition in all patients and one patient was also performed aorto-renal end to side anastomosis. Two patients died of postoperative complications which was a pulmonary insufficiency in one, acute renal failure in another patient.Remaining twelve patients were discharged with good condition and followed up from 2 months to 87 months.[mean $34.58{\pm}29.79$ months.

• Journal of Chest Surgery
• /
• v.22 no.3
• /
• pp.416-424
• /
• 1989

We have performed eight, single transplantations of right lung in dogs from September, 1988 to March 1989 at the Thoracic & Cardiovascular Surgical department, Yonsei University, College of Medicine, Seoul, Korea. We wrapped bronchial anastomosis site with great omentum and used cyclosporin in preoperative and postoperative periods in seven cases except one. The one without wrapping the bronchial anastomotic site with omentum and using cyclosporin died due to bronchial anastomotic site rupture in postoperative fourth day. If there is no reason to choose one side over the other, we would generally choose to do left-sided transplant as this is technically somewhat easier because of the long length of recipient bronchus and the ease of clamping the left atrium proximal to the pulmonary veins. The right atrium limits the amount of left atrium that can have incorporated into the clamp proximal to the pulmonary veins on the right side. But we had chosen to do right-sided transplant of lung because we must take variable technical experiences on right sided lung transplant in dogs. We have to anastomose one of pulmonary vein and left atrial wall on right-sided transplant easily only with double ligation of one pulmonary vein because right atrium limited the clamp of left atrium proximal to pulmonary veins with decreased venous return and cardiac output in some dogs. All seven dogs with right-sided lung transplant had survived more than one day with good condition except one. The one dog have to be sacrificed to evaluate the difference between the gas analysis in pulmonary venous and arterial blood in post-operative eight hours. We found hemorrhagic pulmonary edematous changes of contralateral left lung in this dog. And also all dogs have to be sacrificed for the evaluation of surgical problems, anytime in post-operative periods without any cardiopulmonary resuscitative efforts when the general condition would be worse progressively. We found no any surgical technical errors in seven dogs except one with thrombi in suture site of left atrium. There were hemorrhagic pulmonary edematous changes of transplanted right lung in one, of contralateral left lung in one, of contralateral left lung with double ligation of its pulmonary artery in one, thrombi around left atrial sutures sites in one, multiple air leakage in one bronchial rupture in one due to rejection or infection. There were accidental extubation and delayed intubation in one and unknown cause of death in one.

• Korean Journal of Human Ecology
• /
• v.11 no.3
• /
• pp.307-319
• /
• 2002

We studied on the development of clothing pressure measurement system for wear comfort of foundations(girdle, brassiere, all-in-one). Measurements of clothing pressure were made on subjects wearing girdles, brassieres, all-in-ones of several type(material, size) using by CPMS(clothing pressure measurement system: Tech-Storm. Co). Wearing experiments have been carried out using nine women in the twenties and six women in the forties. The results obtained are as follows: 1. The clothing pressure applied by girdle was higher in the hard type than the soft type by $5-10gf/cm^2$, also recorded a high clothing pressure at points of waist band line and thigh lateral. 2. Clothing pressure of brassiere with wire was high at the point of underbust line and shoulder strap. Pressure for 40s showed higher than 20s by $6-7gf/cm^2$. 3. The pressures of abdominal part applied by both of girdle and all-in-one were much greater than those of girdle or all-in-one. 4. We demonstrated the adaptability and conformity of the CPMS by inquiring into the clothing pressure of various foundations.

• Restorative Dentistry and Endodontics
• /
• v.29 no.1
• /
• pp.66-72
• /
• 2004

All-in-one adhesives were recently developed for reducing the technique sensitivity and chair time, but lots of concerns were made on bondability, longevity, and microleakage. The object of this study was to evaluate microleakage and marginal quality of all-in-one adhesives using electrochemical method and SEM analysis quantitatively. After making Class V cavities, they were bulk filled with Heliomolar(#A1 after surface treatment with three adhesives: Adper Prompt (Group A), One up bond F (Group O), Xeno III (Group X) Electrical conductivity (microamphere, ${\mu}A$) was checked two times: before and after cavity filling. Percentage of leaky margin was estimated from SEM image (${\times}1,000$). The data were statistically analysed: ANOVA and Paired T test for electrical conductivity, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman s rho test for checking of relationships between 2 methods. The result were as follows: 1. There was no difference in microleakage between adhesive systems and every specimen showed some of microleakage after filling. 2. Microleakage was reduced about 70% with composite resin filling. 3. Marginal quality was the best in group A. decreasing among groups in the following order: group O, followed by group X. There were significant differences between group A and group X (p=0.015), and between group 0 and group X (p=0.019). 4. There was no relationship between the microleakage measured by electrochemical method and marginal quality measured by SEM analysis. Within the results of this study, there was no difference in microleakage among groups by electrical conductivity. However, significant difference in marginal quality was seen among groups. It was believed that these dissimilar results might be induced because of their own characteristics. Analysis of microleakage needs various methods for accuracy.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.143-149
• /
• 2018

A cable tray is a fixture to support and protect electrical and communication cables. In this study, a roll-forming analysis is conducted to produce an all-in-one cable tray. The number of process stands is calculated using an empirical formula. By applying bending methods to the design of the roll flower pattern, the final process stands and forming angles are determined. The shape and stress variations in the cable tray are modeled and observed by roll forming analysis using LS-DYNA Software. The width of the side rail and the maximum stress on all stands does not exceed the reference values. The forming machine and rolls are manufactured based on the results of the roll forming analysis. In addition, all-in-one cable trays satisfy the National Electrical Manufacturers Association standards when they are manufactured according to this design.

• Korean Journal of Materials Research
• /
• v.31 no.3
• /
• pp.132-138
• /
• 2021

Electrochromic devices (ECDs) have been drawing great attention due to their high color contrast, low power consumption, and memory effect, and can be used in smart windows, automatic dimming mirrors, and information display devices. As with other electronic devices such as LEDs (light emitting diodes), solar cells, and transistors, the mechanical flexibility of ECDs is one of the most important issue for their potential applications. In this paper, we report on flexible ECDs (f-ECDs) fabricated using an all-in-one EC gel, which is a mixture of electrolyte and EC material. The f-ECDs are compared with rigid ECDs (r-ECDs) on ITO glass substrate in terms of color contrast, coloration efficiency, and switching speed. It is confirmed that the f-ECDs embedding all-in-one gel show strong blue absorption and have competitive EC performance. Repetitive bending tests show a degradation of electrochromic performance, which must be improved using an optimized device fabrication process.

• Journal of Korea Game Society
• /
• v.12 no.1
• /
• pp.15-24
• /
• 2012

Serious games are purposive game. So game-developers want to achieve the desired purposes, and game-users also want to play to achieve the goals of playing games. The function of achievement-assessing is an important area of serious game. In this study, achievement-assessing style was defined as three types, that is, 'all-in-one', 'complex', and 'separation'. Accordingly, we analyzed which type of serious games use which type of achievement-assessing style. As a result, the survey shows that those who want to play game itself preferred 'all-in-one' above all, and those who want to stick to the purpose of game preferred 'separation' or 'complex'. In addition, the investigation of preference of achievement-assessing function shows that users, as a whole, preferred 'all-in-one'. We hope this study will be useful data to design of achievement-assessing function which achieve the purpose of game and provide users with higher satisfaction.

• Clinics in Shoulder and Elbow
• /
• v.5 no.2
• /
• pp.102-109
• /
• 2002

Purpose: To evaluate the results of the treatment of the supracondylar fractures of the humerus according to the fixation methods in adults Materials and Methods: Seven patients, aged 55 to 52 years (average,69 years), were reviewed after a mean follow-up of 37 months (range, 11-65 months). According to AO classification all fractures were classified as type A2 (simple transverse supracondylar fracture). Six patients underwent closed reduction and one patient, open reduction after failure of closed reduction. Percutaneous fixation with cannulated screws was performed to the 4 patients, per- cuta)leous fixation with Kirschner wires in 3 patients. All except one patients have associated medical problems. The results were assessed based on the Mayo Elbow Performance Score. Results: All the patients with cannulated screw fixation had stable bony union with excellent ranges of motion (mean: 5-125 degrees). All the three patients who received percuatnaous smooth K-wire fixation had nonunion with poor results, one of them had changed into cannulated screw. and then had good result. Conclusion: Although simple supracondylar fracture is similar to the pediatric fracture in nature, it should be firmly fixed with the method such as threaded cannualted screw rather than the simple fixation with K-wires.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.1
• /
• pp.44-52
• /
• 2000

This paper is contented with packet transmission scheduling problem for repeating all-to-all broadcasts in WDM optical passive-star networks in which there are N nodes and k wavelengths. It is assumed that each node has one tunable transmitter and one fixed-tuned receiver, and each transmitter can tune to k different wavelengths. The tuning delay represents the time taken for a transmitter to tune from one wavelength to another and represented as ${\delta}$(>0) in units of packet durations. We define all-to-all broadcast as the one where every node transmits packets to all the other nodes except itself. So, there are in total N(N-1) packets to be transmitted for an all-to-all broadcast. The optimal transmission scheduling is to schedule In such a way that all packets can be transmitted within the minimum time. In this paper, we propose the condition for optimal transmission schedules and present an optimal transmission scheduling algorithm for arbitrary values of N, k, and ${\delta}$ The cycle length of the optimal schedules is $max{[\frac{N}{k}](M-1)$, $k{\delta}+N-1$}.