• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.1
• /
• pp.83-91
• /
• 2003

High-speed QPSK demodulator has been in important design objective of any wireless communication systems, especially those offering broadband multimedia service. This paper describes all-digital QPSK demodulator for high-speed wireless communications, and its hardware structures are discussed. All-digital QPSK demodulator is mainly composed of symbol time circuit and carrier recovery circuit to estimate timing and phase-offsets. There are various schemes. Among them, we use Gardner algorithm and Decision-Directed carrier recovery algorithm which is most efficient scheme to warrant the fast acquisition and tacking to fabricate FPGA chip. The testing results of the implemented onto CPLD-EPF10K100GC 503-4 chip show demodulation speed is reached up to 2.6[Mbps]. If it is implemented a CPLD chip with speed grade 1, the demodulation speed can be faster by about 5 times. Actually in case of designing by ASIC, its speed my be faster than CPLD by 5 times. Therefore, it is possible to fabricate the all-digital QPSK demodulator chipset with speed of 50[Mbps].

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.4
• /
• pp.477-483
• /
• 2015

The k-Winners-Take-All (kWTA) is an operation to find the largest k (>1) inputs among N inputs. Parallel search algorithm of kWTA for digital inputs is not invented yet, so most of digital kWTA architectures have O(N) time complexity. A parallel search algorithm for digital kWTA operation and the circuits for its VLSI implementation are presented in this paper. The proposed kWTA architecture can compare all inputs simultaneously in parallel. The time complexity of the new architecture is O(logN), so that it is scalable to a large number of digital data. The high-speed kWTA operation and its O(logN) dependency of the new architecture are verified by simulations. It takes 290 ns in searching for 5 winners among 1024 of 32 bit data, which is more than thousands of times faster than existing digital kWTA circuits, as well as existing analog kWTA circuits.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.2
• /
• pp.94-102
• /
• 2004

The digital electronic switching system has some problems, when this system processes OAM(Operation, Administration And Maintenance) messages about the fault, the traffic, the account, and the performance, etc., at the present. One of these problems is that each the module processing these messages in the digital electronic switching system can not process OAM messages out of another digital electronic switching system. Each the module processing these OAM messages, that is, has been programmed in order to process only the OAM message out of the digital electronic switching system mounting itself, not to process the message out of the digital electronic switching system based on another platform. Therefore, we studied on methods that could process OAM messages out of all digital electronic switching systems and, first of all, developed the MGS(Message Gathering System) to be able to accept and process the fault message of OAM messages out of all digital electronic switching systems in real time.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.121.4-121
• /
• 2002

The digital electronic switching system has some problems, when this system processes OAM(Operation, Administration And Maintenance) messages about the fault, the traffic, the account, and the performance, etc. , at the present. Therefore, we studied on Methods that could process OAM messages out of all digital electronic switching systems and, first of all, developed the MGS (Message Gathering System) to be able to accept and process the fault message of OAM messages out of all digital electronic switching systems in real time.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1528-1535
• /
• 1997

Many radiological modalities has been applied to medicine as a basic fundamental diagnosis and therapy recently. The prevalence of computer systems affect most images to be digitized. However conventional X-ray film images are not digital images eventhough they covers 70% of all radiologica images. This is the hinderacne of building PACS. In this paper all radiological digital imaging parts such as DSA. CR. MRI. SPECT. PET and ultrasonography were briefly introduced and the applications were described. In brief digital radiography contribute to enhance the medical service quality. And the digital substituition of conventional X-ray film image is inevitable.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.10a
• /
• pp.67-82
• /
• 2003

. High potentiality of Digital broadcasting Industry . Low performance of digitalization policy ㆍSollen-Sein Gap makes a bad mood to the digital broadcasting industry . Fill up the gap with aggressive digital policy No stimuli, no move .But need understanding of throughput input isn't all. Digital is common language therefore all information market will be converged as soon as you can imagine

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.2
• /
• pp.145-151
• /
• 2013

In this paper, a low power, small area cyclic time-to-digital converter in All-Digital PLL for DVB-S2 application is presented. Coarse and fine TDC stages in the two-step TDC are shared to reduce the area and the current consumption maintaining the resolution since the area of the TDC is dominant in the ADPLL. It is implemented in a 0.13 ${\mu}m$ CMOS process with a die area of 0.12 $mm^2$. The power consumption is 2.4 mW at a 1.2 V supply voltage. Furthermore, the resolution and input frequency of the TDC are 5 ps and 25 MHz, respectively.

• Journal of Information Technology Services
• /
• v.8 no.4
• /
• pp.75-86
• /
• 2009

Unlike physical products, the distribution of digital content has involved many participants in all distribution phases from providers to consumers. The longer the distribution channel for services is, or the more participants that take part in it, the more the added value of the content increases. Consequently, the customer usefulness has been maximized. In order to enhance the values of digital content, it is utterly urgent to implement a service infrastructure that could be shared by all participants along the distribution path. Digital content is distributed from a creator to a final user through complex value chain stages. All the participants along the value chain exchange information about copyrights, marketing, and contents themselves, through the distribution channel. Recently, the more the distributed Information Technology environment has been widely used, the more the necessity of an identifier for digital content has been increased. In this paper, we examine the current status of the Korean distribution market of digital content, identify necessary distribution services of digital content, and establish a systematic roadmap to implement these services.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.2
• /
• pp.1-10
• /
• 2023

Digital transformation is accelerating in all industries due to COVID-19 and rapidly developing ICT technology. In the field of education, teaching methods that combine various IT devices and software technologies are being applied. The education requires a future learning environment using EduTech such as digital learning tools. We perform a case study on the use of digital learning tools for effective class. In this study, digital learning tools were applied to an university class. The class was held in the second semester of 2022 at A university, with 67 students participating. In our case, QuizN, Mentimeter, and Google Forms were applied as digital learning tools. In order to evaluate our case, a survey was conducted using the Google Questionnaire. From the results of the survey evaluation, more than 85% of all survey questions answered that they were satisfied. From it, digital learning tools were shown to be effective in class operation.

• Imaging Science in Dentistry
• /
• v.33 no.1
• /
• pp.15-20
• /
• 2003

Purpose : To investigate the reproducibility of the conventional and digital radiographs to determine the depth of approximal root cavities. Materials and Methods : A total of 80 artificial root cavities were prepared in the approximal surfaces of premolars, maxillary and mandibular molars. Standardized radiographs were taken at the baseline (0° horizontal and 0° vertical) and at a horizontal angulation of 10° in both mesial and distal directions. Radiographic cavity depths were measured by both conventional and digital radiographs. Results: At 0° horizontal angulation, no statistically significant differences could be determined between the results of conventionally and digitally determined radiographic depths with respect to the actual cavity depths in all premolar, maxillary, and mandibular molar groups. All conventional and digital radiographic depths at both 10° mesial and distal angulations showed statistically significant increases in depth compared to the actual cavity depths (p < 0.05), with the exception of digital radiographic depth at 10° mesial angulation for premolars. There were no statistically significant differences between conventional and digital radiographic depths for all groups. Conclusion: The present study suggests that both conventional and digital radiographs provide reproducible assessment of the depth of the approximal root cavity. But horizontal X-ray beam movements are likely to result in increase in radiographic cavity depth.