• 대한산업공학회지
• /
• 제27권3호
• /
• pp.297-304
• /
• 2001

Procurement decisions for inspection equipment are often made heavily based on the initial purchase price instead of the effects of inspection cost, equipment calibration and utilization over the lifetime. Cost of ownership(COO) models that take into account all of these cost factors together have been developed focusing on a single quality characteristic. In modern manufacturing environment, inspection equipment often can deal with more than one quality characteristic simultaneously. In this paper, we propose the revised COO model for the economic evaluation of the inspection equipment that can accommodate multiple quality characteristics. We also employ an engineering economy model to compare equipments with different life span. Software is developed for handy comparison of the COO of alternative equipments along with sensitivity analysis far the optimal procurement decision.

• 한국항해항만학회지
• /
• 제31권2호
• /
• pp.151-157
• /
• 2007

After World Trade Center's Terror in 2001 and promulgating Maritime Transportation Security Act (MTSA, 2002) and Security and Accountability For Every Port Act (SAFE Port Act, 2006) in the United States, most of the attention on security of international transportation including marine carrier and facility has focused increasingly. Inspection stations in foreign seaport terminal including Busan, South Korea, have been installed by Container Security Initiative (CSI) and Customs Trade Partnership against Terrorism (C-TPAT). The inspection station, however, may directly and indirectly affect delay of truck turnaround time in the seaport, especially high and severe level of security. This paper was analysed a risk for the additional average delay of truck turnaround time incurring by the inspection station under the all level of security, C-TPAT and CSI. As a result of this risk analysis, the higher weighted inspection time based on raising security level, the less number of trucks to be inspected, which will derive high delay in the inspection station.

• Restorative Dentistry and Endodontics
• /
• 제42권1호
• /
• pp.48-53
• /
• 2017

Objectives: The aim of this study was to investigate the ability of the fluorescence-aided caries excavation (FACE) device to detect residual caries by comparing conventional methods in vivo. Materials and Methods: A total of 301 females and 202 males with carious teeth participated in this study. The cavity preparations were done by grade 4 (Group 1, 154 teeth), grade 5 (Group 2, 176 teeth), and postgraduate (Group 3, 173 teeth) students. After caries excavation using a handpiece and hand instruments, the presence of residual caries was evaluated by 2 investigators who were previously calibrated for visual-tactile assessment with and without magnifying glasses and trained in the use of a FACE device. The tooth number, cavity type, and presence or absence of residual caries were recorded. The data were analyzed using the Chi-square test, the Fisher's Exact test, or the McNemar test as appropriate. Kappa statistics was used for calibration. In all tests, the level of significance was set at p = 0.05. Results: Almost half of the cavities prepared were Class II (Class I, 20.9%; Class II, 48.9%; Class III, 20.1%; Class IV, 3.4%; Class V, 6.8%). Higher numbers of cavities left with caries were observed in Groups 1 and 2 than in Group 3 for all examination methods. Significant differences were found between visual inspection with or without magnifying glasses and inspection with a FACE device for all groups (p < 0.001). More residual caries were detected through inspection with a FACE device (46.5%) than through either visual inspection (31.8%) or inspection with a magnifying glass (37.6%). Conclusions: Within the limitations of this study, the FACE device may be an effective method for the detection of residual caries.

• 한국정보통신학회논문지
• /
• 제5권6호
• /
• pp.1157-1162
• /
• 2001

본 논문에서는 영상 처리 기법을 이용하여 칼라 팔레트 외형상의 불량품을 식별하는 연구를 수행하고자 한다 먼저 기본적인 팔레트 자동선별시스템의 필요성에 대해 기술하며, 각 샘플링된 팔레트에 대해 영상처리기법을 이용한 불순물 검출 알고리즘을 제안하고자 한다. 또한 이를 상용화할 수 있도록 윈도우환경의 비전처리 프로그램을 제시하였다. 끝으로 본 연구에 대한 평가와 앞으로의 연구과제에 대해 기술하고자 한다.

• 한국융합학회논문지
• /
• 제11권11호
• /
• pp.183-187
• /
• 2020

LCD BLU의 CCFL 전극에 사용되는 몰리브덴 전극의 주요소재인 몰리브덴 컵과 몰리브덴 핀은 국내 가공기술이 개발되지 못하여 전량 일본에서 수입하여 사용되고 있어 CCFL 제조업체들의 납기 및 경쟁력에 부담을 주고 있다. 본 연구에서는 LCD BLU의 CCFL 전극에 사용되는 몰리브덴 핀의 제조 기술을 개발하는 연구로 직선처리 기술개발, 몰리브덴 와이어 표면처리 기술개발, 와이어 절단기술 개발, 몰리브덴 핀의 제작, 검사용 JIG와 Fixture 설계 및 제작, 몰리브덴 핀 시제작 및 해석, 몰리브덴 핀 전수검사 기술개발에 관한 연구를 수행하였으며 본 논문에서는 몰리브덴 핀 제작에 있어 전수검사기 융합설계에 대한 연구를 다루고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.587-591
• /
• 2001

본 연구에서는 영상 처리를 이용하여 외형적인 칼라 팔레트내의 불량품을 식별하는 실험을 수행하고자 한다. 기본적인 팔레트 자동선별시스템에 대해 기술하며, 각 샘플링된 팔레트에 대해 영상처리기법을 이용한 불순물 검출 알고리듬을 제안하고자 한다. 또한 이를 상용화할 수 있도록 윈도우환경의 비전처리 프로그램을 제시하였다. 끝으로 본 연구에 대한 평가와 앞으로의 연구과제에 대해 기술하고자 한다.

• 한국경영과학회지
• /
• 제28권3호
• /
• pp.49-60
• /
• 2003

In this paper, we study the joint design of sampling inspections and service capacities for multi-products. Products of different defect rates which are either deterministic or random variables are supplied in batches after sampling inspection and rework. When supplied, all defective products that have not been inspected in batches are uncovered through total inspection and returned to service. We identify the optimal inspection policies and service capacities for multi-products reflecting the relationships between inspection rework costs and service provision costs. We also develope a marginal allocation algorithm for the optimal allocation of the limited total service capacity to products as well as inspection quantities.

• 품질경영학회지
• /
• 제25권4호
• /
• pp.168-184
• /
• 1997

The primary objective of this paper is to develop an interactive computer graphic aided decision su, pp.rt system for the design of inspection plans for complex production systems. This research first develops a computer simulator, called Simulator for Inspection Systems(SIS), in order to represent the production system as a network model. The simulator elicits fundamental information about the system from the decision maker(DM) in an interactive manner. A decision su, pp.rt system is then proposed by combining SIS and Compromise Programming. The system simulates a set of possible inspection strategies implicitly, observes all the important measurements about the inspection system, and employs the compromise programming a, pp.oach to help the DM determine the best compromising allocation of inspection effort considering his/her preferences. Finally, the performance of the proposed system is evaluated using two test cases. The pros and cons of the system are also discussed.

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.28-34
• /
• 1997

This paper describes an automatic measurement method for the in-line inspection of assembly tolerances of cathod ray electron guns. The method uses an optical microscope with a CCD camera as a probe. An automatic gap recognition algorthm with digital image processing and a new software autofocus algorithm based on using an optimal edge detector have been developed to improve the measuring accuracy. An inspection system has been proposed and practically implemented for in-line inspection to a real factory automation line. The inspection system consists of a gap inspection part and an eyelet. Total time consumed for inspecting all measuring items is about 10 seconds and the repeatability is below .+-. 5 .mu. m

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.654-658
• /
• 2002

The purpose of this paper is to establish an effective featured based inspection planning system for OMM(On-Machine Measurement) process. In this system, an effective inspection process planning is accomplished by determining the number of measuring points, their locations and probing paths using fuzzy logic, Hammersley method and TSP problem. Also, an effective collision-free algorithm Is proposed based on the EZ-map analysis. All the inspection planning processes are performed based on the defined inspection features those are derived from the CAD database. Proposed inspection planning method is simulated for the given sample wrokpieces, and the results are analyzed. The results show that the proposed method can be successfully implemented in real OMM process.