• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.271-275
• /
• 1999

The chemical and gelling properties of porphyran from Porphra yezoensis collected from Buan and Wido in Korea at different months of the year were studied. Crude porphyran was prepared by hot-water extraction and further purified by cetylpyridinium chloride precipitation, Crude porphyran and porphyran were modified by alkali treatment to eliminate sulfate. The yields of alkali-modified crude porphyran (AMCP) and porphyran(AMP) were between $4.9\~10.9\%$ and $4.0\~6.7\%$ of the dried algae weight and were maximum in February for Buan and January for Wido, respectively. Gel strength of AMCP were highest in February ($790g/cm^2$) for Buan and January ($740 g/cm^2$) for Wido. Alkali modification increased 3,6-anhydro galactose content and the molar ratio of galactose and 3,6-anhydrogalactose of AMCP and AMP showed 1 : 0,8$\~$1.1. GLC and FT-IR measurement of AMP showed that most of sulfate residues were combined to C-6 of galactose, Thus, results of this study suggest that crude porphyran extracted from Porphra yezoensis produces an agar of a reasonably good quality after alkali treatment.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.129-136
• /
• 2006

Although cleaner and cheaper deinking of ONP could be performed at the neutral or low alkaline condition excessive loss from froth-flotation is unavoidable and so reduction of alkali or caustic soda dosage sacrifices recycling yield. Now the new trade-off regarding alkali dosage versus flotation yield is urgently required in order to set the optimized neutral or low alkaline deinking process of ONP. Lipase from Thermomyces Lanuginosus has an effect on desizing and deacetylation reaction and it could be applied to the stock of pre flotation secondary stage in order to reduce the flotation reject without the sacrifice of optical properties of flotation accepts. Instead of inorganic base, lipase could be applied as a biochemical catalyst for the selective modification of valuable hydrophobic particles in deinking stock, for example cellulose fines and inorganic fillers covered by hydrophobic additives or contaminants. When the enzymatic hydrolysis of ester bond could be made on the surface of hydrophobic particulates, unwanted float of fine particles could be prevented. Now the enhancement of flotation selectivity or the modification of the hydrophobicity of deinking stock is expected to be promoted by the enzymatic pre treatment. And the reduction of recycling cost with the saves of raw material, recovered paper would be possible as a result.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.497-503
• /
• 2003

Supplementary cementitious materials (SCM) such as fly ash, ground granulated blast furnace slag and silica fume are now being extensively used in concrete to control expansion due to alkali-silica reactivity (ASR). However, the replacement level of a single SCM needed to deleterious ASR expansion and cracking may create other problem and concerns. For example, incorporating silica fume at levels greater than 10％ by mass of cement may lead to dispersion and workability concerns, while fly ash can lead to poor strength development at early age, The combination of silica fume and fly ash in ternary cementitious system may alleviate this and other concerns, and result in a number of synergistic effects. The aim of the study was to enable evaluation of more realistic suitability of a silica fume-fly ash combination system for ASR resistance based on an in-house modification of ASTM C 1260 test method. The modification can be more closely identified with actual field conditions. In this study three different strengths of NaOH test solution(1N, 0.5N, and 0.25N) were used to measure the expansion characteristics of mortar bar made with a reactive aggregate. The other variable included longer testing period of 28 days instead of a conventional 14 days.

• Korean Journal of Materials Research
• /
• v.19 no.7
• /
• pp.362-368
• /
• 2009

Ti scaffolds with a three-dimensional porous structure were successfully fabricated using powder metallurgy and modified rapid prototyping (RP) process. The fabricated Ti scaffolds showed a highly porous structure with interconnected pores. The porosity and pore size of the scaffolds were in the range of 66$\sim$72% and $300\sim400\;\mu$m, respectively. The sintering of the fabricated scaffolds under the vacuum caused the Ti particles to bond to each other. The strength of the scaffolds depended on the layering patterns. The compressive strength of the scaffolds ranged from 15 MPa to 52 MPa according to the scaffolds' architecture. The alkali treatment of the fabricated scaffolds in an aqueous NaOH solution was shown to be effective in improving the bioactivity. The surface of the alkali-treated Ti scaffolds had a nano-sized fibre-like structure. The modified surface showed a good apatite forming ability. The apatite was formed on the surface of the alkali treated Ti scaffolds within 1 day. The thickness of the apatite increased when the soaking time in a simulated body fluid (SBF) solution increased. It is expected that the surface modification of Ti scaffolds by alkali treatment could be effective in forming apatites in vivo and can subsequently enhance bone formation.

• Korean Journal of Materials Research
• /
• v.16 no.5
• /
• pp.277-284
• /
• 2006

The alloys were prepared by a non-consumable vacuum arc melting and homogenized at $1050^{\circ}C$ for 24 hrs. Two kind of surface modifications were performed alkali treatment in 5.0M NaOH solution subsequent and heat treatment in vacuum furnace at $600^{\circ}C$, and were oxidizing treatment at the temperature range of 550 to $750^{\circ}C$ for 30 minutes. After surface modification, these samples were soaked in SBF which consists of nearly the same ion concentration as human blood plasma. Cytotoxicity tests were performed in MTT assay treated L929 fibroblast cell culture, using indirect methods. A porous and thin activated layer was formed on Titanium and Ti-8Ta-3Nb alloy by the alkali treatment. A bone-like hydroxyapatite was nucleated on the activated porous surfaces during the in vitro test. However, Ti-8Ta-3Nb alloys showed better bioactive properties than Titanium. According to XRD results, oxide layers composed of mostly $TiO_2$(rutile) phases. Cytotoxicity test also revealed that moderate oxidation treatment lowers cell toxicity and Ti-8Ta-3Nb alloy showed better results compared with Titanium.

• Computers and Concrete
• /
• v.18 no.2
• /
• pp.279-295
• /
• 2016

A new innovative composite material is textile reinforced cementitious composite (TRCC). To achieve high flexural performance researchers suggest polymer modification of TRCC matrices. In this study, nine ready mix repair mortars commonly used in construction industry and the production of TRCC elements were examined. Mechanical properties such as compressive and flexural strength, drying shrinkage were studied. Being a significant durability concern, alkali silica reaction tests were performed according to related standards. Results showed that, some ready repair mortar mixes are potentially reactive due to the alkali silica reaction. Two of the ready mortar mixes labelled as non-shrinkage in their technical data sheets showed the highest shrinkage. In this experiment, researchers designed new matrices. These matrices were fine grained concretes modified with polymer additives; latexes and redispersible powders. Two latexes and six redispersible powder polymers were used in the study. Mechanical properties of fine grained concretes such as compressive and flexural strengths were determined. Results showed that some of the fine grained concretes cast with redispersible powders had higher flexural strength than ready mix repair mortars at 28 days. Matrix composition has to be designed for a suitable consistency for planned production processes of TRCC and mechanical properties for load-carrying capacity.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.659-662
• /
• 2008

A new and useful poly(ethylene oxide)-based pH-sensitive block copolymer is introduced. Poly(ethylene oxide-b-N-phenylmaleimide) was first synthesized by anionic polymerization of N-phenylmaleimide (N-PMI) using mixed alkali metal polymeric alkoxide by sequential monomer addition method in the mixture of benzene/THF/DMSO (10/5/3, v/v/v) at room temperature. Reductive deimidation of the resulting block copolymer was performed using hydrazine monohydrate leading to the formation of the corresponding pH-sensitive poly(ethylene oxide-b-maleic acid).

• Journal of Nutrition and Health
• /
• v.15 no.3
• /
• pp.202-211
• /
• 1982

A modification of a microbiological assay of vitamin $B_{12}$ was made and used to determine the vita­min levels during kimchi fermentation. A cyanide-buffer solution of pH 6.0 replaced the metabisufite-buffer specified in the A.O.A.C. method. The vitamin $B_{12}$ activity was decreased by blending kimchi samples for 5 minutes and retained the activity by steaming for 10 minutes before blending. The alkali hydrolysis of kimchi at pH 12.0 for 30 minutes at $121^{\circ}C$ was sufficient to destroy the vitamin $B_{12}$ and permit the detection of analogs with the same assay organism. Vitamin $B_{12}$ reached a maximum of 47ng/100g during the fermentation of kimchi ${15}\;4^{\circ}C.$ Inoculation of the kimchi with Propionibacterium shermanii (ATCC 13673) increased the vitamin production to a maximum of 102ng/100g at 1 week of fermentation. Soy flour (0.5%) or beef extract (0.05%), which were regarded as protein sources, added to the inoculated kimchi further increased the vitamin $B_{12}$ activity to 197 and 203ng/100g.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.133-144
• /
• 2023

Densification is an effective method for improving the physical and mechanical properties of low-density wood. However, the set-recovery of dimensions was found to be the problem of densified wood due to low fixation during the densification process. Alkali pretreatment before densification is thought to be a modification process to improve the dimensional stability of densified wood. In this research, the wood samples used were boiled in a 1.25 N sodium hydroxide (NaOH) solution at different times, followed by densification for 5 h at 100℃. The alkali pretreatment for 1, 3, and 5 h of boiling increased the dimensional stability of densified woods and anti-swelling efficiency values were 8.52%, 63.24%, and 48.94%, respectively. The boiling of wood in NaOH solution decreased the holocellulose content, as well as lignin to a lesser degree, and a lower crystallinity index was observed. The lower hydroxyl groups and a higher proportion of lignin in treated samples seem to have contributed to the high dimensional stability detected.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.