• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.86-94
• /
• 2020

Purpose: The purpose of this study is to compare the volume stability depending on the mixing methods and storage time for the conventional alginate and extended-pour alginate. Materials and methods: An arch-shaped metal model was fabricated, and one conventional alginate and two extended-pour alginates were used to take impressions using different mixing methods (hand and automatic). 120 impressions were taken (40 per each alginate) and stone models were made in accordance with the different storage times (immediate, 2 days, 5 days, and 6 days). The models were scanned with a 3D table scanner and dimensional change was measured by superimposing the scan data. Using SAS 9.4 (SAS Institute Inc., Cary, NC, USA), the general linear model and Tukey's post hoc test was conducted for statistical analysis (P<.001). Results: There was no statistically significant difference in the dimensional accuracy between two mixing methods, and the volume change was minimum when the stone was poured immediately in all groups. Dimensional accuracy showed a statistically significant difference between groups after 2 days of storage, and extended-pour alginate showed higher accuracy after 5 days of storage comparing to conventional one. Large amounts of volume change were showed at 2 - 5 days for conventional alginate and at 5 - 6 days for extended pour alginate. Conclusion: The mixing method of alginate does not affect volume stability. Although extended-pour alginate has better volume stability than conventional alginate for a long time, it is recommended to pour stone as soon as possible.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.227-232
• /
• 2014

Depolymerization of sodium alginate (SA) was carried out by electron beam irradiation in a hydrogen peroxide atmosphere. E-beam with 1.0 and 2.5 MeV of accelerating voltages were employed in this experiment. For control of molecular weight and the radiation yield of scission ($G_s$), the irradiation dosage of e-beam was managed in a range from 2.5 to 20 kGy while the quantity of hydrogen peroxide was adjusted in a range of 0 to 4.5%. The chemical structure of the depolymerized sodium alginate (DSA) was analyzed to have scission of 1,4-glycoside bond mainly and a few fragmentary formate end groups which may be produced by the cleavage between C2 and C3 in repeating unit of alginate. It turned out to have simple chemical structures at the DSA end groups, produced by e-beam irradiation, similar with those in the polymer SA structure. As a result, the molecular weight of SA decreased as the energy and dosage of applied e-beam increased, and the radiation yield of scission showed the best result at 2w/v% in SA concentration. The highest radiation yield of scission ($7.919{\times}10^4mol/J$) was confirmed when an irradiation dosage of 20 kGy (2 MeV) and 1.5% hydrogen peroxide were used in 2% SA aqueous solution.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.330-336
• /
• 2015

Purpose: This study evaluated the effect of loss of interproximal papilla, creating an undercut, on the accuracy of impression materials. Materials and methods: Two addition type silicone impression materials ($Extrude^{(R)}$ Speed Wash, $Imprint^{TM}$ II Quick Step Light Body) and one alginate impression material (Cavex Impressional) were used to make impressions of a maxillary master model simulating clinical conditions with or without interproximal papilla. Stone was poured in the impressions and working casts were fabricated. A total of 6 groups with 6 working casts in each group were scanned using 3-dimensional optical scanner. The accuracy of the impressions was assessed by measuring the dimensional changes (${\Delta}I$ (%)) of 6 distances on working casts compared to a master model with a 3-dimensional digitizing and inspection software. The data were analyzed by two-way ANOVA (P<.05). Results: Three of 6 distances showed statistically significant differences among the impression materials. Only 1 of 6 distances in alginate impression showed a statistically significant difference between casts with and without interproximal papilla (P=.047). Conclusion: The presence of undercut due to loss of interproximal papilla did not significantly influence the dimensional accuracy of addition type silicone and alginate impression materials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.325-330
• /
• 2000

Alginate obtained from brown algae had various physicochemical and rheological properties and could used as a dietary fiber, However, alginate has not been widely applied to the food industry, since it had high viscosity, high gelling effect conjugated with some mineral, and low solubility. To improve functionality of alginate, partially develymerized alginates, which was water-soluble dietary fiber were obtained by hydrolysis of alginate from the sea tangle, Laminaria japonicus, heated at $121^{\circ}C$. Effects of depolymerization of alginate on the changes of viscosity and average molecular weight, block composition ratio of mannuronate to guluronate (M/G ratio), chemical properties using $PT-IR, ^1H-NMR, and ^(13)C-NMR$ spectrum were investigated. The average molecular weight and viscosity of the alginate were rapidly decreased with the thermal decomposition, and estimated to be 1,307,415 dalton and 284,000 cps, before heating, 728,106 and 3,940.29 cps after 30 min heating, 102,635 and 22.22 cps after 2.5 hrs heating, 51,205 and 12.05 cps after 3 hrs, and 10,049 and 4.28 cps after 6.5 hrs, respectively. The M/G ratio was increased with the heating time, while MM-block did not show any changes and GG-block diminished. The results of $FT-IR, ^1H-NMR and ^(13)C-NMR$ spectrum suggested that changes of molecular structure did not occur by the thermal decomposition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.388-392
• /
• 2000

To improve functionality and characteristics of alginate from the sea tangle, Laminaria japonicus, partially depolymerized alginates (HAG-10, average molecular weight 10,000; HAG-50, average molecular weight 50,000; HAG-100, average molecular weight 100,000) were obtained with hydrolysis of alginate by heating at $12^{\circ}C$. Effects of the depolymerization on physicochemical properties were investigated in the antimutagenicity and binding capacity of cholesterol, glucose and cadmium. In the Ames mutagenicity test using Salmonella typhimurium TA 100, HAG-10, HAG-50, HAG-100 and intact alginate reduced effectively the mutagenicities induced by aflatoxin $B_1 (AFB_1)$ and N-methyl-N'-nitro-N-nitrosoguanidine(MNNG) and HAG-10 showed the strongest antimutagenicity among the tested samples. The binding capacity of cholesterol, glucose and cadmium at different pH in vitro depended highly on molecular weight of alginate, and the changes in binding capacity at different pH was not different.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.393-398
• /
• 2000

To extend utilization of alginate from the sea tangle, Laminaria japonicus, depolymerized alginates (HAG-10, average molecular weight 10,000; HAC-50, average molecular weight 50,000; HAG-100, average molecular weight 100,000) were obtained by hydrolysis of alginate by heating at $12^{\circ}C$. The effects of each depolymerized alginate on excretion of cholesterol, glucose and namium in rats were investigated. The total excretion rate (${\%}$) of cholesterol and cadmium was the highest in rats administered with HAG-50, The rate was $45.81{\%} and 59.02{\%} with HAG-50$. It was high in the order of $45.78{\%} and 56.05{\%}$ in HAG-100, $41.28{\%}$ and $55.96{\%}$ in alginate, and $32.11{\%} and 44.92{\%} in HAC-10$, respectively. In the case of HAG-50, it significantly (p<0.01) prevented the serum glucose level of rats from rising within 30 min and 60 min after glucose loading or administration among all the samples, but it had no particular effects on the serum insulin level. In conclusion, it was suggested that HAG-50, in which the alginate had a decreased molecular weight, while still retaining its desirable functions as a dietary fiber, was effective in excretion of harmful substances, such as cadmium and cholesterol, and in lowering glucose activities in serum of rats.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.121-129
• /
• 2015

Alginates are found in marine brown seaweeds and in extracellular biofilms secreted by some bacteria. Previously, we reported an oligoalginate lyase from Sphingomonas sp. MJ-3 (MJ3-Oal) that had an exolytic activity and protein sequence homology with endolytic polymannuronate (polyM) lyase in the N-terminal region. In this study, the MJ3-Oal was tested for both exolytic and endolytic activity by homology modeling using the crystal structure of Alg17c from Saccharophagus degradans 2-40T. The tyrosine residue at the $426^{th}$ position, which possibly formed a hydrogen bond with the substrate, was mutated to phenylalanine. The FPLC profiles showed that MJ3-Oal degraded alginate quickly to monomers as a final product through the oligmers, whereas the Tyr426Phe mutant showed only exolytic alginate lyase activity. $^1H$-NMR spectra also showed that MJ3-Oal degraded the endoglycosidic bond of polyM and polyMG (polymannuronate-guluronate) blocks. These results indicate that oligoalginate lyase from Sphingomonas sp. MJ-3 probably catalyzes the degradation of both exo- and endo-glycosidic bonds of alginate.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.552-556
• /
• 1998

In this study, the quality stability of a kind of natural seasoning material, the mixture of enzyme treated mackerel meat and Laminaria powder during the storage was investigated by measuring the TBA(thiobarbituric acid)value, extend of browning, changes in amino nitrogen and chlorophyll a, and fatty acid composition, and the results of sensory evaluation. Addition of sodium alginates (0.08%) and calcium carbonate (0.02%) seemed effective as a binder to yield clarity of the hot water extract of the product. In results, the mixture of Laminaria powder and the enzyme treated mackerel meat added with 0.08% sodium alginate and 0.02% calcium carbonate was more stable in overall quality than the other cases of preparation. And the taste of the mixture could favorably compete with that of dried anchovy extracts.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.82-89
• /
• 1998

Partial hydrolyzing condition for low-molecularized alginate and rheological properties such as viscosity, solubility, emulsitying ability, oil absorption capacity, bile acids binding and metal ion binding of the low-molecularized alginates from the sea mustard ( Undaria pinnatifida) and giant kelp (Macrocystis pyrifera) were investigated. Alginate from sea mustard was regularly hydrolyzed with the increase of HCl concentration in the range of 0.2 N to 0.5 N and with the prolonged reaction time at $100^{\circ}C$. The molecular weight of alginate was decreased to a part of 100 after hydrolysis for 50 min with 0.3 N HCl. The ratio of mannuronate to guluronate was increased with the acid hydrolysis and total yield was estimated to be $75\%\~80\%$. Low-molecularization of alginate was featured in the apparent decrease of viscosity, whereas solubility, emulsifying ability, and bile acids binding ability were increased with the low-molecularization. Oil absorption capacity of the acid$\cdot$alkali soluble alginate was slightly higher than that of the water soluble alginate. Metal ion binding capacity was the highest in acid$\cdot$alkali soluble alginate, and decreased with the low-molecularization.