• Food Science of Animal Resources
• /
• v.29 no.5
• /
• pp.579-589
• /
• 2009

This study was conducted to investigate the effects of heating, fiber type used in solid-phase microextraction (SPME, two phase vs three phase) and storage time on the volatile compounds of porcine M. longissimus dorsi (LD). Volatile compounds were measured using a gas chromatography and mass spectrometry (GC/MS) with a quadrupole mass analyzer. Among the volatile compounds identified, aldehydes (49.33%), alcohols (24.63%) and ketones (9.85%) were higher in pre-heated loins ($100^{\circ}C$/30 min), whereas, alcohols (34.33%), hydrocarbons (22.84%) and ketones (16.88%) were higher in non-heated loins. Heating of loins induced the formation of various volatile compounds such as aldehydes (hexanal) and alcohols. The total contents of hydrocarbons, alcohols, and carboxylic acids were higher in two phase fibers, whereas those of esters tended to be higher in three-phase fibers (p<0.05). Most volatile compounds increased (p<0.05) with increased storage time. Thus, the analysis of volatile compounds were affected by the fiber type, while heating and refrigerated storage of pork M. longissimus dorsi increased the volatile compounds derived from lipid oxidation and amino acid catabolism, respectively.

• KSBB Journal
• /
• v.26 no.6
• /
• pp.533-537
• /
• 2011

The aim of this study was to develop a new natural preservative system to improve the weak points of natural polyhydric alcohols together with the efficiency of natural plants as a preservative. Polyhydric alcohols (glyceryl caprylate and ethylhexylglycerin) and antimicrobial plants (S. radix, A. nilotica and C. reticulata) were tested using the disc diffusion method and minimum inhibitory concentration (MIC) method for their antimicrobial activity against the common poultry pathogens, respectively. A study of the preservative efficacy of the cosmetic formulations containing the optimized preservative system demonstrated sufficient preservative efficacy against bacteria and eukaryotic test microbes. These results suggest that the natural preservative system including polyhydric alcohol extracts containing natural plants could be incorporated in cosmetic formulations.

• Journal of the Korean Chemical Society
• /
• v.61 no.5
• /
• pp.244-250
• /
• 2017

Reduction of (${\pm}$)-3-ketoproline ethyl ester (1) by $NaBH_4$ in the presence of $CaCl_2$ and $MgCl_2$ as the chelating agents gave selective products cis-3(R/S)-alcohols, while reduction by $NaBH_4$ alone or chelated with $NiCl_2$ and $AlBr_3$ gave mixtures of cis- and trans-alcohols. The reduction of (${\pm}$)-1 by various vegetables however, gave exclusively the cis-alcohol as the major and trans-alcohol as the minor. On the contrary, reduction of (${\pm}$)-1 by carrot afforded a mixture of cis- and trans-alcohols, in which the trans-alcohol exists as the major product. In addition, we found that this biocatalyst selectively converted S-enantiomer of (${\pm}$)-1 to the cis-alcohol, and R-enantiomer to a mixture of cis- and trans-alcohols with cis-alcohol as the major product. This fact prompted us to use various fresh plant tissues for stereoselective reduction of diverse types of pyrrolidinones, as its stereoselectivity towards racemic mixtures is higher compared to that using chemical reducing agents.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.3
• /
• pp.288-294
• /
• 1990

Two pure fuel oils(#1 oil, #6 oil), theree pure alcohols (methanol, ethanol, propanol) were tested for the fuel characteristics such as miscibility (that established which pure fuels and fuel mixtures could be fired in the boiler), flash point, viscosity. Specific target of the study besides the oil/alcohols or oil/alcohol mixture without any modification and with safety. #1 oil could be mixed without any problems at all concentrations with two of the alcohols; these were the ethanol and propanol. However, miscibility of #6 oil with any alcohols and #1 oil with methanol was not possible and very limited in this study. The measurements of flash point and viscosity for the mixtures were done for the comparisons with the pure fuels. There was a marked change of flame shape and flame luminosity as the alcohol content of the mixtures was increased. The mixture flame shortened and became non-luminous compared with a pure fuel oil flame.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.43-48
• /
• 1993

The $^1H-NMR$ spectra of the NH-group were obtained for N-ethylacetamide (NEAA) in the series of n-alcohols over a temperature range of 310∼350K by using NMR spectroscopy. The $^1H-NMR$ lineshape coupled to $^{14}N$ nucleus were analyzed to obtain the reorientational correlation times ${\tau}_c$ of NEAA. The data indicate that the coupling of solute and solvent decreases as the chain length of n-alcohols increases. But in the n-alcohols the reorientational motion depends almost linearly on η/T of solvents over our temperature range. The results are discussed in the context of the subslip phenomenon.

• Advances in nano research
• /
• v.8 no.2
• /
• pp.95-102
• /
• 2020

In this work the properties of iron oxide magnetic nanoparticles (MNPs) synthesized by electrochemical method using different water-alcohol proportions and alcohols have been investigated. The syntheses were carried out using 99% iron foils acting electrodes in a 0.04 M NaCl solutions at room temperature applying 22 mAcm^-2 on the working electrode, mostly obtaining magnetite nanoparticles. The impact of the electrolyte in the size of the synthesized MNPs has been evaluated by transmission electron microscopy (TEM), X-ray diffraction (XRD), chronopotentiometric studies, and magnetic characterization. The results have shown that nanoparticles can be obtained in the range of 6 to 26 nm depending on the type of alcohol and the proportions in the mixture of water-alcohol. The same trend has been observed for all alcohols. As the proportion of these in the medium increases, the nanoparticles obtained are smaller in size. This trend is maintained until a certain proportion of alcohol: 50% for methanol, and 60% for the rest of alcohols, proportions where obtaining a single phase of magnetite is not favored.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.416-421
• /
• 1995

The approximate rates and stoichiometry of the reaction of excess lithium gallium hydride with selected organic compounds containing representative functional groups were examined under the standard conditions (diethyl ether, 0 $^{\circ}C)$ in order to compare its reducing characteristics with lithium aluminum hydride and lithium borohydride previously reported, and enlarge the scope of its applicability as a reducing agent. Alcohols, phenol, and amines evolve hydrogen rapidly and quantitatively. However lithium gallium hydride reacts with only one active hydrogen of primary amine. Aldehydes and ketones of diverse structure are rapidly reduced to the corresponding alcohols. Conjugated aldehyde and ketone such as cinnamaldehyde and methyl vinyl ketone are rapidly reduced to the corresponding saturated alcohols. p-Benzoquinone is mainly reduces to hydroquinone. Caproic acid and benzoic acid liberate hydrogen rapidly and quantitatively, but reduction proceeds slowly. The acid chlorides and esters tested are all rapidly reduced to the corresponding alcohols. Alkyl halides and epoxides are reduced rapidly with an uptake of 1 equiv of hydride. Styrene oxide is reduced to give 1-phenylethanol quantitatively. Primary amides are reduced slowly. Benzonitrile consumes 2.0 equiv of hydride rapidly, whereas capronitrile is reduced slowly. Nitro compounds consumed 2.9 equiv of hydride, of which 1.9 equiv is for reduction, whereas azobenzene, and azoxybenzene are inert toward this reagent. Cyclohexanone oxime is reduced consuming 2.0 equiv of hydride for reduction at a moderate rate. Pyridine is inert toward this reagent. Disulfides and sulfoxides are reduced slowly, whereas sulfide, sulfone, and sulfonate are inert under these reaction conditions. Sulfonic acid evolves 1 equiv of hydrogen instantly, but reduction is not proceeded.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.4
• /
• pp.663-669
• /
• 2008

The solvent-tolerant bacterium Enterobacter sp. VKGH12 is capable of utilizing n-butanol and contains an $NAD^+$-dependent n-butanol dehydrogenase (BDH). The BDH from n-butanol-grown Enterobacter sp. was purified from a cell-free extract (soluble fraction) to near homogeneity using a 3-step procedure. The BDH was purified 15.37-fold with a recovery of only 10.51, and the molecular mass estimated to be 38 kDa. The apparent Michaelis-Menten constant ($K_m$) for the BDH was found to be 4 mM with respect to n-butanol. The BDH also had a broad range of substrate specificity, including primary alcohols, secondary alcohols, and aromatic alcohols, and exhibited an optimal activity at pH 9.0 and $40^{\circ}C$. Among the metal ions studied, $Mg^{2+}$ and $Mn^{2+}$ had no effect, whereas $Cu^{2+},\;Zn^{2+}$, and $Fe^{2+}$ at 1 mM completely inhibited the BDH activity. The BDH activity was not inhibited by PMSF, suggesting that serine is not involved in the catalytic site. The known metal ion chelator EDTA had no effect on the BDH activity. Thus, in addition to its physiological significance, some features of the enzyme, such as its activity at an alkaline pH and broad range of substrate specificity, including primary and secondary alcohols, are attractive for application to the enzymatic conversion of alcohols.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2711-2719
• /
• 2013

Hydrogen bonding interaction between alcohols and water molecules is an important characteristic in the aqueous solutions of alcohols. In this paper, a series of molecular dynamics simulations have been performed to investigate the aqueous solutions of low molecular weight alcohols (methanol, ethylene glycol and glycerol) at the concentrations covering a broad range from 1 to 90 mol %. The work focuses on studying the effect of the alcohols molecules on the hydrogen bonding of water molecules in binary mixtures. By analyzing the hydrogen bonding ability of the hydroxyl (-OH) groups for the three alcohols, it is found that the hydroxyl group of methanol prefers to form more hydrogen bonds than that of ethylene glycol and glycerol due to the intra-and intermolecular effects. It is also shown that concentration has significant effect on the ability of alcohol molecule to hydrogen bond water molecules. Understanding the hydrogen bonding characteristics of the aqueous solutions is helpful to reveal the cryoprotective mechanisms of methanol, ethylene glycol and glycerol in aqueous solutions.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.4
• /
• pp.382-388
• /
• 1989

The approximate rates and stoichiometry of the reaction of excess potassium tri-sec-butylborohydride ($K_s-Bu_3BH$) with selected organic compounds containing representative functional groups were determined under the standard conditions (0$^{\circ}C$, THF) in order to define the characteristics of the reagent for selective reductions. Primary alcohols evolve hydrogen in 1 h, but secondary and tertiary alcohols and amines are inert to this reagent. On the other hand, phenols and thiols evolve hydrogen rapidly. Aldehydes and ketones are reduced rapidly and quantitatively to the corresponding alcohols. Reduction of norcamphor gives 99.3% endo- and 0.7% exo-isomer of norboneols. The reagent rapidly reduces cinnamaldehyde to the cinamyl alcohol stage and shows no further uptake of hydride. p-Benzoquinone takes up one hydride rapidly with 0.32 equiv hydrogen evolution and anthraquinone is cleanly reduced to the 9,10-dihydoxyanthracene stage. Carboxylic acids liberate hydrogen rapidly and quantitatively, however further reduction does not occur. Anhydrides utilize 2 equiv of hydride and acyl chlorides are reduced to the corresponding alcohols rapidly. Lactones are reduced to the diol stage rapidly, whereas esters are reduced moderately (3-6 h). Terminal epoxides are rapidly reduced to the more substituted alcohols, but internal epoxides are reduced slowly. Primary and tertiary amides are inert to this reagent and nitriles are reduced very slowly. 1-Nitropropane evolves hydrogen rapidly without reduction and nitrobenzene is reduced to the azoxybenzene stage, whereas azobenzene and azoxybenzene are inert. Cyclohexanone oxime evolves hydrogen without reduction. Phenyl isocyanate utilizes 1 equiv of hydride to proceed to formanilide stage. Pyridine and quinoline are reduced slowly, however pyridine N-oxide takes up 1.5 equiv of hydride in 1 hr. Disulfides are rapidly reduced to the thiol stage, whereas sulfide, sulfoxide, sulfonic acid and sulfone are practically inert to this reagent. Primary alkyl bromide and iodide are reduced rapidly, but primary alkyl chloride, cyclohexyl bromide and cyclohexyl tosylate are reduced slowly.