• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.116-122
• /
• 2018

Due to the opening of Incheon International Airport Terminal 2, the operation range of ground operators is expanding and the workload is increased, which may cause a deterioration of the operation quality. Airline and airport corporations are concerned about safety delays as well as delays in flight due to delays in operations. Air traffic demand at Incheon International Airport is expected to increase steadily in the future. Therefore, this study intends to derive quality improvement plan by investigating the perception of stakeholders about the status of fishing service in order to improve service quality of Incheon airport ground handling company. The results of the analysis are expected to be used as basic data for improving quality of service.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.65-72
• /
• 2019

There is concern about the increased risk of accidents from manual investments due to ground handling service operators, aging equipment and manpower shortages. Therefore, it is necessary to improve the quality of ground treatment services and safety management at the airport. Therefore, this study analyzed the domestic and overseas ground operation status and the license handling procedure of aircraft handling business. In addition, a case study on the evaluation system of international organizations examined the applicability of the certification body to the Korean situation. It is practical in that it provides policy implications for improving the quality of groundwork not covered in previous studies. This is expected to improve the constitution, improve quality, improve airport operations, and operate safely.

• Advances in aircraft and spacecraft science
• /
• v.4 no.6
• /
• pp.651-677
• /
• 2017

For the past ten years' efforts have been made to introduce environmentally-friendly "green" electric-taxi and maneuvering airplane systems. The stated purpose of e-taxi systems is to reduce the taxiing fuel expenses, expedite pushback procedures, reduce gate congestion, reduce ground crew involvement, and reduce noise and air pollution levels at large airports. Airplane-based autonomous traction electric motors receive power from airplane's APU(s) possibly supplemented by onboard batteries. Using additional battery energy storages ads significant inert weight. Systems utilizing nose-gear traction alone are often traction-limited posing serious dispatch problems that could disrupt airport operations. Existing APU capacities are insufficient to deliver power for tractive taxiing while also providing for power off-takes. In order to perform comparative and objective analysis of taxi tractive requirements a "standard" taxiing cycle has been proposed. An analysis of reasonably expected tractive resistances has to account for steepest taxiway and runway slopes, taxiing into strong headwind, minimum required coasting speeds, and minimum acceptable acceleration requirements due to runway incursions issues. A mathematical model of tractive resistances was developed and was tested using six different production airplanes all at the maximum taxi/ramp weights. The model estimates the tractive force, energy, average and peak power requirements. It has been estimated that required maximum net tractive force should be 10% to 15% of the taxi weight for safe and expeditious airport movements. Hence, airplanes can be dispatched to move independently if the operational tractive taxi coefficient is 0.1 or higher.

• Journal of Korean Society of Transportation
• /
• v.23 no.6 s.84
• /
• pp.41-53
• /
• 2005

The effective utilization of an airport is considerably influenced by natural features and man-made structures inside and outside its boundary. These obstacles affect the airspace available for approaches and departures and the weather minima which dictates the necessary weather conditions for aircraft to be allowed to take-off or land. Certain areas of the airspace near airports must be regarded as the integral parts of the airport system. The availability of the required airspace is as important as are the runway and their associated strips to the safe and efficient use of the airport. For these reasons, ICAO and the member states have established the standards regarding the obstacle limitation surfaces and regulated the construction of the man-made structures in and beyond the surfaces. Existing objects that extend above a obstacle limitation surfaces should as for as practicable be removed except when, in the opinion of the appropriate authority, an objects is shielded an existing immovable objects, or after aeronautical study it is determined that the object would not adversely affect the safety or significantly affect the regularity of operations of airplanes. However, Korea's aviation law does not specified the outer horizontal surface in the obstacle limitation surfaces, while ICAO and most member states do. The absence of the outer horizontal surface regulation has created legal disputes between regulating agencies and private parties. The case study in this paper found that a skyscraper planned beyond Korea's obstacle limitation surfaces does affect the flight safety and the efficient use of an airport. Therefore, in areas beyond the obstacle limitation surfaces. those objects which extend to a height of 150m or more above ground elevation should be regarded as obstacle, unless a special aeronautical study indicates that they do not constitute a hazard to airplanes. We proposed low alternative regulatory schemes for resolving the issues raised in this paper, and we recommended to adopt ICAO's standards and recommended practices.

• Geotechnical Engineering
• /
• v.14 no.2
• /
• pp.67-78
• /
• 1998

Microtunnelling is a technique applied to install a small-size tunnel in a soft cohesionless ground. In microtunnelling, a series of concrete tubular segments are pushed from a starting pit to power-line tunnel under a runway of JFK international airport at New York. During the microtunneling process, bentonite is jetted with very hyh pressure through a nozzle to advance disturbance in the subgrade caused by the pressurized bentonite in the aspects of subgrade stiffness. SASW measurements were performed on the runway above the center line of the shear wave velocity profiles. Besides the change of subgrade stiffness, the change of subgrade strength was also evaluated by the site-specific relationships between shear wave velocity and N value, which was determined by N values. The estimated N values gave a clue to the understanding of the change of subgrade strength.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.811-820
• /
• 2006

The Platform Screen Door system(PSD) is scheduled to be installed on the platform of some subway stations in Seoul, Pusan, Kwang-Ju, Daejun and Daegu and all stations of Seoul Subway No 9. will equipped with PSD. On the other hand Seoul Metropolitan Rapid Speed(SMRT) that has operated the train automatically had finished the basic desic design and the execution drawing of PSD and installed successfully the PSD on the platforms in the Kimpo Airport station in Subway Line No 5. at dec. 2005. The exhibition operations of PSD has made the major contribution to build up the safe and optimum subway for the increasing customers. Nowadays PSD has operated on ATO sections and ATS sections. But in the case of closing the door manually in ATO sections, it would be delayed about 5 seconds in closing the door of PSD. Although the interface of PSD, train and the signal system is established automatically, we have to supplement technically on the interface between train, PSD and the ground signal interface equipments. Therefore I will center on the optimizing methods about the interfacing system between the train and the PSD, train and the signal system to overcome the above problems in this study.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.55-65
• /
• 2023

Due to extreme urbanization, ground transportation in the city center is saturated, and problems such as the lack of expansion infrastructure and traffic congestion increase social costs. To solve this problem, a 3D mobility platform, Urban Air Mobility (UAM), has emerged as a new alternative. A vertiport is a physical space that conducts a similar role to an airport terminal. Vertiport consists of take-off and landing facilities (TLOF, Touchdown and Lift-Off area), space for boarding and disembarking from UAM aircraft (gates), taxiways, and passenger terminals. The type of vertiport (structure, number of facilities) and concept of operations are key variables that determine the number of UAM aircraft that can be accommodated per hour. In this study, a capacity calculation method was presented using an optimization technique (Deterministic Integer Linear Programming). The absolute capacity of the vertiport was calculated using an optimization technique, and a sensitivity analysis was also performed.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.275-276
• /
• 2023

국토교통부는 공항의 지상조업 근로자 근무환경을 개선하기 위하여 2019년 11월부터 40개 과제를 발굴·시행하는 등 노력해 왔으나, 근원적인 안전관리체계 개선이 필요하다는 판단에 따라, 노조와 지상조업사 등 관계기관과 간담회를 통해 수렴한 의견을 바탕으로 국토교통부는 승객이동, 항공기 견인 등 항공운항의 필수 역할을 하는 지상조업의 서비스 및 안전성을 높이기 위해 '지상조업 안전관리 강화방안'을 수립했다. 본 논문은 공항에서 지상조업 시 안전하고 신속하게 할 수 있도록 하는 '공항용 원격 주행 멀티카트' 기술을 제안한다. 현장이 아닌 컨트롤러를 이용한 원격으로 주행하여 지상조업자의 안전을 보장하고, 카트에 멀티파츠를 장착하여 지장조업 장비의 유지 보수를 편리하게 관리하며 라이다 센서, 카메라, 적외선 센서 등을 이용하여 장애물을 피하는 멀티카트를 구현하여 공항 지상조업의 발전을 선도할 것이다.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.115-168
• /
• 2018

An amendment to Japanese Civil Aeronautics Act came into effect December 10, 2015. The Act prohibits flying drones over residential areas or areas surrounding an airport without permission from the Minister of Land, Infrastructure and Transportation. Flying drones during night time and during an event is also prohibited. The term "UAV" or "UA" means any aeroplane, rotorcraft, glider or airship which cannot accommodate any person on board and can be remotely or automatically piloted (Excluding those lighter than a certain weight (200 grams). Any person who intends to operate a UAV is required to follow the operational conditions listed below, unless approved by the Minister of Land, Infrastructure, Transport and Tourism; (i) Operation of UAVs in the daytime, (ii) Operation of UAVs within Visual Line of Sight (VLOS), (iii) Maintenance of a certain operating distance between UAVs and persons or properties on the ground/water surface, (iv) Do not operate UAVs over event sites where many people gather, (v) Do not transport hazardous materials such as explosives by UAV, (vi) Do not drop any objects from UAVs. Requirements stated in "Airspace in which Flights are Prohibited" and "Operational Limitations" are not applied to flights for search and rescue operations by public organizations in case of accidents and disasters. This paper analyzes some issues as to regulations of UAVs in Korean Aviation Safety Act by comparing the regulations of UAVs in Japanese Civil Aeronautics Act. This paper, also, offers some implications and suggestions for regulations of UAVs under Korean Aviation Safety Act.