Browse > Article
http://dx.doi.org/10.12989/aas.2017.4.6.651

Determination of taxiing resistances for transport category airplane tractive propulsion  

Daidzic, Nihad E. (AAR Aerospace Consulting, LLC)
Publication Information
Advances in aircraft and spacecraft science / v.4, no.6, 2017 , pp. 651-677 More about this Journal
Abstract
For the past ten years' efforts have been made to introduce environmentally-friendly "green" electric-taxi and maneuvering airplane systems. The stated purpose of e-taxi systems is to reduce the taxiing fuel expenses, expedite pushback procedures, reduce gate congestion, reduce ground crew involvement, and reduce noise and air pollution levels at large airports. Airplane-based autonomous traction electric motors receive power from airplane's APU(s) possibly supplemented by onboard batteries. Using additional battery energy storages ads significant inert weight. Systems utilizing nose-gear traction alone are often traction-limited posing serious dispatch problems that could disrupt airport operations. Existing APU capacities are insufficient to deliver power for tractive taxiing while also providing for power off-takes. In order to perform comparative and objective analysis of taxi tractive requirements a "standard" taxiing cycle has been proposed. An analysis of reasonably expected tractive resistances has to account for steepest taxiway and runway slopes, taxiing into strong headwind, minimum required coasting speeds, and minimum acceptable acceleration requirements due to runway incursions issues. A mathematical model of tractive resistances was developed and was tested using six different production airplanes all at the maximum taxi/ramp weights. The model estimates the tractive force, energy, average and peak power requirements. It has been estimated that required maximum net tractive force should be 10% to 15% of the taxi weight for safe and expeditious airport movements. Hence, airplanes can be dispatched to move independently if the operational tractive taxi coefficient is 0.1 or higher.
Keywords
airplane taxiing resistances; traction taxiing; electric taxiing; traction force; energy; and power; aerodynamic drag in the ground effect; wind resistance; tire dynamics; airport design;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Asselin, M. (1997), An Introduction to Aircraft Performance, American Institute for Aeronautics and Astronautics (AIAA), Reston, U.S.A.
2 Boeing (2005), 767 Airplane Characteristics for Airport Planning (D6-58328), Boeing Commercial Airplanes Seattle, U.S.A.
3 Anderson, J.D. (1991), Fundamentals of Aerodynamics, 2nd Edition, McGraw-Hill, New York, U.S.A.
4 Anderson, J.D. (1999), Aircraft Performance and Design, McGraw-Hill, New York, U.S.A.
5 Boeing (2012), 747-8 Airplane Characteristics for Airport Planning (D6-58326-3), Boeing Commercial Airplanes, Seattle, U.S.A.
6 Boeing (2013), 737 Airplane Characteristics for Airport Planning (D6-58325-6), Boeing Commercial Airplanes, Seattle, U.S.A.
7 Braess, H.H. and Seifert, U. (2005), Handbook of Automotive Engineering, Society of Automotive Engineers International (SAE), Warrensdale, U.S.A.
8 Civil Aviation Authority (UK CAA) (2014), CAP 168: Licensing of Aerodromes, 10th Edition, Civil Aviation Authority, West Sussex, U.K.
9 Clark, S.K. (1971), Mechanics of Pneumatic Tires (NBS Monograph 122), National Bureau of Standards, Washington, U.S.A.
10 Daidzic, N.E. (2016), "Estimation of performance airspeeds for high-bypass turbofans equipped transportcategory airplanes", J. Aviat. Technol. Eng., 5(2), 27-50.
11 Daidzic, N.E. (2017), "Modelling and computation of the maximum braking energy speed for transport category airplanes", J. Aviat. Technol. Eng., 6(2), 2-25.
12 Filippone, A. (2012), Advanced Aircraft Flight Performance, Cambridge University Press, Cambridge, U.K.
13 Daidzic, N.E. and Shrestha, J. (2008), "Airplane landing performance on contaminated runways in adverse conditions", J. Aircraft, 45(6), 2131-2144.   DOI
14 Dixon, J.C. (1996), Tires, Suspension and Handling, 2nd Edition, Society of Automotive Engineers International (SAE), Warrendale, Pennsylvania, U.S.A.
15 Ehsani, M., Gao, Y. and Emadi, A. (2010), Modern Electric, Hybrid Electric and Fuel Cell Vehicles, 2nd Edition, CRC Press, Florida, U.S.A.
16 Fitzgerald, A.E., Kingsley, C. and Umans, S.D. (2003), Electric Machinery, 6th Edition, McGraw-Hill, New York, U.S.A.
17 Vanker, S., Enneveer, M. and Rammul, I. (2009), "Noise assessment and mitigation schemes for estonian airports", Aviat., 13(1), 17-25.   DOI
18 Treager, I.E. (1995), Aircraft Gas Turbine Engine Technology, 3rd Edition, Glencoe McGraw-Hill, New York, U.S.A.
19 US Department of Transportation, Federal Aviation Administration (2013), Part 25, Airworthiness Standards: Transport Category Airplanes, Washington, U.S.A.
20 US Department of Transportation, Federal Aviation Administration (2014), Airport Design (AC 150/5300-13A), Washington, U.S.A.
21 Vinh, N.X. (1993), Flight Mechanics of High-Performance Aircraft, Cambridge University Press, Cambridge, U.K.
22 Gottlieb, I.M. (1994), Electric Motors and Control Techniques, 2nd Edition, McGraw-Hill, New York, U.S.A.
23 Freitas, E.F.C. and Daidzic, N.E. (2017), "Design of DC-link VSCF AC electrical power system for embraer 190/195 aircraft", J. Aviat. Technol. Eng., 7(1), 19-44.
24 Giannakakis, P., Laskaridis, P. and Pilidis, P. (2011), "Effects of off-takes for aircraft secondary-power systems on jet engine efficiency", J. Propul. Pow., 27(5), 1024-1031.   DOI
25 Gillespie, T.D. (1992), Fundamentals of Vehicle Dynamics, Society of Automotive Engineers International (SAE), Warrendale, Pennsylvania, U.S.A.
26 Hay, W.W. (1982), Railroad Engineering, 2nd Edition, John Wiley & Sons, New York, U.S.A.
27 Heleno, T.A., Slama, J.G. and Bentes, F.M. (2014), "Analysis of airport noise through LAeq noise metrics", J. Air Transp. Manage., 37, 5-9.   DOI
28 Hershey, R.L. and Turner, L. (1974), "Taxiing noise of jet aircraft", J. Acoust. Soc. Am., 56(S1), S34-S35.
29 Hospodka, J. (2014), "Electric taxiing-taxibot system", Mag. Aviat. Develop., 2(10), 17.   DOI
30 Wild, T.W. (2008), Transport Category Aircraft Systems, 3rd Edition, Jeppesen, Englewood, U.S.A.
31 Wong, J.Y. (2008), Theory of Ground Vehicles, 4th Edition, John Wiley & Sons, New York, U.S.A.
32 Yager, T. (1990), "Tire/runway friction interface", SAE Technical Paper, #901912.
33 Jazar, R.N. (2008), Vehicle Dynamics: Theory and Applications, Springer, New York, U.S.A.
34 Hughes, K., Nutaro, J. and Haissig, C.M. (2013), Electric Taxi Auto-Guidance and Control System, US Patent, US 8,620,493.
35 HUnecke, K. (2000), Die Technik Des Modernen Verkehrsflugzeuges (2. Auflage), Motorbuchverlag, Stuttgart, Germany.
36 ICAO (2006), Aerodrome Design Manual, 3rd Edition, International Civil Aviation Organization, Montreal, Canada.
37 Ignaccolo, M. (2000), "Environmental capacity: Noise pollution at Catania-Fontanarossa international airport", J. Air Transp. Manage., 6(4), 191-199.   DOI
38 International Air Transport Association (IATA) (2016), Annual Review.
39 Kerrebrock, J.L. (1992), Aircraft Engines and Gas Turbines, 2nd Edition, MIT Press, Cambridge, U.S.A.
40 Kuznetsov, V.M. (2003), "Noise control problems of passenger airplanes (a review)", Acoust. Phys., 49(3), 241-262.   DOI
41 Larminie, J. and Lowry, J. (2012), Electric Vehicle Technology Explained, 2nd Edition, John Wiley & Sons, Chichester, West Sussex, U.K.
42 Mair, W.A. and Birdsall, D.L. (1992), Aircraft Performance, Cambridge University Press, Cambridge, U.K.
43 Mattingly, J.D. (2005), Elements of Gas Turbine Propulsion, American Institute for Aeronautics and Astronautics (AIAA), Reston, Virginia, U.S.A.
44 McCormick, B.W. (1995), Aerodynamics, Aeronautics and Flight Mechanics, 2nd Edition, John Wiley & Sons, New York, U.S.A.
45 Miller, J.M. (2004), Propulsion Systems for Hybrid Vehicles, IEEE, London, U.K.
46 Milliken, W.F. and Milliken, D.L. (1995), Race Car Vehicle Dynamics, Society of Automotive Engineers International (SAE), Warrendale, Pennsylvania, U.S.A.
47 Morlok, E.K. (1978), Introduction to Transportation Engineering and Planning, McGraw-Hill, New York, U.S.A.
48 Mirosavljevic, P., Gvozdenovic, S. and Cokorilo, O. (2011), "A model of air traffic assignment as part of airport air pollution management system", Aviat., 15(4), 92-100.   DOI
49 Moir, I. and Seabridge, A. (2008), Aircraft Systems-Mechanical, Electrical, and Avionics Subsystems Integration, 3rd Edition, John Wiley and Sons, Chichester, U.K.
50 Moir, I. and Seabridge, A. (2013), Design and Development of Aircraft Systems, 2nd Edition, John Wiley & Sons, New York, U.S.A.
51 Nicolai, L.M. and Carichner, G.E. (2010), Fundamentals of Aircraft and Airship Design: Volume I-Aircraft Design, American Institute for Aeronautics and Astronautics (AIAA), Reston, Virginia, U.S.A.
52 Page, J. and Hobbs, C. (2010). "Modeling of noise from aircraft taxiing operations", J. Acoust. Soc. Am., 127, 1834.
53 Raymer, D.P. (1999), Aircraft Design: A Conceptual Approach, 3rd Edition, American Institute for Aeronautics and Astronautics, Reston, Virginia, U.S.A.
54 Roskam, J. and Lan, C.T. (1997), Airplane Aerodynamics and Performance, DAR Corporation, Lawrence, U.S.A.
55 Scholz, D., Seresinhe, R., Staack, I. and Lawson, C. (2013), "Fuel consumption due to shaft power off-takes from the engine", Workshop on Aircraft System Technologies, Hamburg, Germany, April.
56 Stansfeld, S. (2013), "Airport noise and cardiovascular disease", BMJ, 347.
57 Swatton, P.J. (2008), Aircraft Performance: Theory and Practice for Pilots, 2nd Edition, John Wiley & Sons Chichester, U.K.
58 Teo, A., Rajashekara, K., Hill, J. and Simmers, B. (2008), "Examination of aircraft electric wheel drive taxiing concept", SAE Technical Paper, 2008-01-2860.