• 제목/요약/키워드: airborne based

검색결과 448건 처리시간 0.033초

8방향 포집방식에 따른 대기 중 비래염분의 분포특성 평가 (Evaluation of the Distribution Characteristics of Airborne Chlorides by Eight-directional collection method)

  • 조규환;이영준;박동천
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 춘계 학술논문 발표대회
    • /
    • pp.98-99
    • /
    • 2014
  • The newly developed eight-directional collector was installed at five different locations in the coastal area after its functionality was verified through experiments. Based on the airborne chloride amount measured for one year, the distribution characteristics of airborne chlorides were examined by direction. In terms of direction, a large amount of airborne chlorides was collected, not only in the direction facing the coast but also in the opposite direction. The amount measured at effective three directions was 1.5 times that measured at non-effective three directions.

  • PDF

사료제조공장 내 공기 중 세균과 진균 분포에 관한 연구 (Distribution of airborne microorganism in the feedstuff manufacture factory)

  • 김기연;정연일;김치년;원종욱;노재훈
    • 한국산업보건학회지
    • /
    • 제17권4호
    • /
    • pp.335-342
    • /
    • 2007
  • The objective of the study is to investigate the distribution patterns of airborne bacteria and fungi in the feedstuff manufacture factory. The mean levels of airborne bacteria and fungi in the feedstuff manufacture factory were $113({\pm}18)cfu/m^3$ and $89({\pm}5)cfu/m^3$ for pelleting process and $198({\pm}5)cfu/m^3$ and $124({\pm}12)cfu/m^3$ for powdering process, respectively. The percentage of respirable and total concentration of airborne bacteria and fungi in the feedstuff manufacture factory ranged from 60% to 90% and were higher in pelleting process than powdering process. The ratio of indoor and outdoor airborne microorganism exceeded 1.0 regardless of types of feedstuff manufacture process. Based on the result of the study, there would be an association between environmental factors such as relative humidity and carbon dioxide and airborne microorganism's bioactivity.

An Eight-directional Airborne Chloride Collection Method for the Application of an Appropriate Anti-corrosive Material for Each Side of a Building

  • Cho, Gyuhwan;Yeo, Inhwan;Park, Dongcheon
    • Architectural research
    • /
    • 제18권2호
    • /
    • pp.75-82
    • /
    • 2016
  • To secure the anticorrosive performance of structures in the oceanic environment it is necessary to select appropriate finishing materials and thickness of cover. However, airborne chloride deposition varies depending on the collector used, and it is difficult to select appropriate finishing materials. For this reason, an eight-directional collector is proposed in this study through reviewing the differences between existing airborne chloride collectors and the new one. To analyze airborne chloride deposition according to the direction from which it flows and verify the performance of the collector proposed in this study, airborne chlorides were deposited on the collector for one year at five different locations in an oceanic environment. From the experiment, it was verified that in terms of direction, there were differences in airborne chloride deposition of up to more than 1.5 times. Based on these research findings, the anti-corrosive method applied can be different for each side of a building's structure, and this is believed to serve as an effective and systemic chloride resistance design.

유기성 폐기물 자원화 시설에서 발생되는 부유 세균의 분포 특성 (Distribution Characteristics of Airborne Bacteria in Organic-Waste Resource Facilities)

  • 김기연;고한종;김대근
    • 한국환경보건학회지
    • /
    • 제38권2호
    • /
    • pp.151-158
    • /
    • 2012
  • Objectives: Bioaerosols released by treating organic-waste resources cause a variety of environmental and hygiene problems. The objective of this study was to investigate the distribution characteristics of the airborne bacteria emitted from a pig manure composting plant, a principal site for organic-waste resource facilities. Methods: Three types of pig manure composting plant were selected based on fermentation mode: screw type, rotary type and natural-dry type. Each site was visited and investigated on a monthly basis between September 2009 and August 2010. A total of 36 air samplings were obtained from the pig manure composting plants. The air sampling equipment was a six-stage cascade impactor. Quantification and qualification of airborne bacteria in the air samples was performed by agar culture method and identification technique, respectively. Results: The mean concentrations of airborne bacteria in pig manure composting plant were 7,032 (${\pm}1,496$) CFU $m^{-3}$ for screw type, 3,309 (${\pm}1,320$) CFU $m^{-3}$ for rotary type, and 5,580 (${\pm}1,106$) CFU $m^{-3}$ for natural dry type. The screw type pig manure composting plant showed the highest concentration of airborne bacteria, followed by the natural dry type and the rotary type. The ratio of respirable to total airborne bacteria was approximately 40-60%. The predominant genera of airborne bacteria identified were Micrococcus spp., Staphylococcus spp. and Escherichia spp. Conclusion: Monthly levels of airborne bacteria were highest in August and lowest in November regardless of fermentation mode. There was no significant correlation relationship between airborne bacteria and environmental factors such as temperature, relative humidity and particulate matters in pig manure composting plants.

항공기 외장형.전자전 방향탐지장치 개발 (The Development of an airbone-based direction-finding system for EW application)

  • 전병태;박영미;최도원;박문복;임중수
    • 한국군사과학기술학회지
    • /
    • 제5권3호
    • /
    • pp.98-104
    • /
    • 2002
  • An airborne-based Direction-Finding System is developed for the application of ELINT and ES(Electronic Support). The system takes the phase-comparison technology, and has the configuration of multi-based antenna array for the solution of ambiguity due to the increased Direction-Finding resolution. This thesis describes the design of optimized distances among antennas, the electrical characteristics, the method of compensation, the direction-finding accuracy, and et. al. under the condition of the airborne-based environment.

Relationship between airborne pollen concentrations and meteorological parameters in Ulsan, Korea

  • Jung, In-Yong;Choi, Kee-Ryong
    • Journal of Ecology and Environment
    • /
    • 제36권1호
    • /
    • pp.65-71
    • /
    • 2013
  • The concentration of airborne pollen is related to meteorological parameters. The main purpose of this study was to determine the correlation between airborne pollen and meteorological parameters in Ulsan based on sampling from 2010 to 2011. The primary factors of interest were differences in the pollen scattering start date, end date, and peak date, and the fluctuations in pollen concentration. The meteorological parameters that affected the start and peak dates of the pollen season were as follows. For Pinus and Alnus, the dates were correlated with sunshine and an increase in temperature, whereas for Quercus, the dates were correlated with increasing temperature. During the pollen season, Alnus peaked when the temperature was highest and Pinus peaked when the relative humidity was lowest. The concentration of airborne pollen was correlated with meteorological parameters during the sampling period as follows: Pinus, Alnus, and Humulus pollen concentrations were positively correlated with increasing temperature and negatively correlated with rainfall and relative humidity; Humulus pollen concentration was positively correlated with sunshine; and Quercus and Humulus pollen concentrations were positively correlated with wind speed.

Design of Airborne Terminal System for Joint Tactical Data Link System Complete Data-link

  • Choi, Hyo-Ki;Yoon, Chang-Bae;Hong, Seok-Jun
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제9권2호
    • /
    • pp.139-147
    • /
    • 2020
  • In this paper, design measure were proposed for the construction of terminal systems for airborne platforms, which are key element in the Joint Tactical Data Link System (JTDLS) complete system. The Korean perfect tactical data link (JTDLS) is a communication system to establish an independent tactical data link network and needs to develop a MIDS-LVT (Link-16) communication terminal for datalink. Once a Ground/Navy JTDLS terminal system is established around airborne platform, it will be possible to break away from reliance on NATO-based tactical data link joint operations and establish independent Korean surveillance reconnaissance real-time data sharing and tactical data link operations concepts. in this paper, the essential development elements of airborne platform mounting and operable JTDLS terminals are presented, and the concept of system design is proposed to embody them. Further, improved system performance was analyzed by applying the concepts of complex relative navigation system and Advanced TDMA protocol for the deployment of airborne tactical datalink networks.

에어노드 기반 무선센서네트워크 구축을 위한 적응형 오르막경사법 기반의 자율무인비행로봇제어 (Autonomous Unmanned Flying Robot Control for Reconfigurable Airborne Wireless Sensor Networks Using Adaptive Gradient Climbing Algorithm)

  • 이덕진
    • 로봇학회논문지
    • /
    • 제6권2호
    • /
    • pp.97-107
    • /
    • 2011
  • This paper describes efficient flight control algorithms for building a reconfigurable ad-hoc wireless sensor networks between nodes on the ground and airborne nodes mounted on autonomous vehicles to increase the operational range of an aerial robot or the communication connectivity. Two autonomous flight control algorithms based on adaptive gradient climbing approach are developed to steer the aerial vehicles to reach optimal locations for the maximum communication throughputs in the airborne sensor networks. The first autonomous vehicle control algorithm is presented for seeking the source of a scalar signal by directly using the extremum-seeking based forward surge control approach with no position information of the aerial vehicle. The second flight control algorithm is developed with the angular rate command by integrating an adaptive gradient climbing technique which uses an on-line gradient estimator to identify the derivative of a performance cost function. They incorporate the network performance into the feedback path to mitigate interference and noise. A communication propagation model is used to predict the link quality of the communication connectivity between distributed nodes. Simulation study is conducted to evaluate the effectiveness of the proposed reconfigurable airborne wireless networking control algorithms.

전파 지연이 긴 공중 전술 TDMA 네트워크에서 송신자 간 거리 기반 보호 시간 제어 기법 (Inter-Transmitter Distance-Based Guard Time Control Scheme in Airborne Tactical TDMA Networks with Long Propagation Delay)

  • 백호기;임재성;구자열;오일혁
    • 한국통신학회논문지
    • /
    • 제37C권11호
    • /
    • pp.1104-1111
    • /
    • 2012
  • 공중 전술 네트워크는 공대공 또는 공대지 작전에 사용되고 전파 지연이 크다는 특징이 있다. 모든 노드는 TDMA 기반의 브로드캐스팅을 사용하여 데이터를 공유한다. 공중 전술 네트워크에서는 긴 전파 지연으로 인한 충돌 때문에, 브로드캐스팅을 보장하기 위해서는 각 타임 슬롯마다 보호 시간이 필요하다. 그러나 보호 시간의 낭비로 인해 네트워크의 채널 이용률이 크게 저하될 수 있다. 본 논문에서는 송신자 간 거리 정보를 사용하여 보호 시간의 낭비를 줄여 채널 이용률을 향상시키면서 브로드캐스팅을 보장하는 Inter-Transmitter Distance-Based TDMA (ID-TDMA) 기법을 제안한다. 그리고 성능 평가를 통해 ID-TDMA의 효과성을 확인하였다.

탄소나노튜브 성장 실험실에서 CVD 밀폐 여부에 따른 공기 중 나노입자 농도 비교 (Comparison of Airborne Nanoparticle Concentrations between Carbon Nanotubes Growth Laboratories based on Containment of CVD)

  • 하주현;신용철
    • 한국산업보건학회지
    • /
    • 제20권3호
    • /
    • pp.184-191
    • /
    • 2010
  • Although the usage of nanomaterials including carbon nanotubes (CNTs) has increased in various fields, scientific researches on workers' exposures and controls of these materials are very limited. The purpose of this study was to compare the airborne nanoparticles concentrations from two university laboratories conducting experiments of CNTs growth based on containment of thermal chemical vapor deposition (CVD). Airborne nanoparticle concentrations in three metrics (surface area concentration, particle number concentration, and mass concentrations) were measured by task using three direct reading instruments. In a laboratory where CVD was not contained, the surface area concentration, number concentration and mass(PM$_1$) concentration of airborne nanoparticles were 1.5 to 3.5 times higher than those in the other laboratory where CVD was confined. The ratio of PM$_1$ concentration to total suspended particles(TSP) in the laboratory where CVD was not confined was about 4 times higher than that in the other laboratory. This indicates that CVD is a major source of airbone nanoparticles in the CNTs growth laboratories. In conclusion, researchers performing CNTs growth experiments in these laboratories were exposed to airborne nanoparticles levels higher than background levels, and their exposures in a laboratory with the unconfined CVD were higher than those in the other laboratory with the confined CVD. It is recommended that in the CNTs growth laboratories adequate controls including containment of CVD be implemented for minimizing researchers' exposures to airborne nanoparticles.