• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.125-128
• /
• 1994

One of the abnormal motions of the projectile in the coil gun is spinning. It is found that the spinning force is closely related with air gap distance. Modified and detail analysis for the spinning is suggested in this paper. Two reasons for spinning force and Lorentz force affecting on the spinning are introduced. Nutation, which is a result of spinning, is explained there after.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.27-37
• /
• 2022

In this study, a study and interpretation of the spinning process in copolymerized aramid spinning was conducted. In order to proceed with the spinning process modeling and analysis, the spinning process was modeled through the physical property modeling of the spinning solution and the structural modeling of the spinneret, and structural stability and flow of the spinneret for this spinning were analyzed. After modeling the spinning solution and the spinneret in a virtual space, the pack pressure and flow rate when the spinning solution was discharged were simulated. Macroscopically, the structural stability of the spinneret was confirmed at the standard pack pressure (100 kg·f/cm²), and microscopically, the flow rate and pressure drop data of the spinning solution according to the L/D(Length (L)/Diameter (D)) value were analyzed. Based on the research and development of virtual engineering modeling and analysis, we present the possibility of changing the shape and mechanical properties of copolymer aramid fibers according to the spinning process.

• Membrane and Water Treatment
• /
• v.9 no.1
• /
• pp.43-51
• /
• 2018

Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.109-109
• /
• 2002

A study has been made of the dry-jet-wet spinning of PAN copolymer fibers using 60% aqueous zinc chloride solution as solvent and 25∼40% aqueous zinc chloride solution as non-solvent. The technological characteristics of this method were that small streams of dope were extruded from the die and allowed to pass through a short distance of air gap(about 10mm) before entering the spinning bath for full coagulation. This work showed the importances which coagulation condition, stretch ratio and fiber tenacity up to 10.5 g/d could be obtained with elongation of 11∼16%. Individual fibers were evaluated on the basis of density and mechanical properties such as tenacity and elongation etc.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.33-39
• /
• 2002

A study has been made of the dry-jet-wet spinning of PAN copolymer fibers using 60% aqueous zinc chloride solution as solvent and 25∼40% aqueous zinc chloride solution as non-solvent. The technological characteristics of this method were that small streams of dope were extruded from the die and allowed to pass through a short distance of air gap(about 10mm) before entering the spinning bath for full coagulation. This work showed the importances which coagulation condition, stretch ratio and fiber tenacity up to 10.5 g/d could be obtained with elongation of 11∼16%. Individual fibers were evaluated on the basis of density and mechanical properties such as tenacity and elongation etc.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.93-95
• /
• 1998

1. 서론 : 폴리이미드계 고분자는 기계적 성질과 내열성이 우수한 고분자 소재이다. 일반적으로 기체분리막으로서의 유리상 고분자는 기체의 투과성은 결여되지만, 고분자쇄의 동결속박에 의한 자유부피에 따라 기체의 선택성이 높게 나타난다. 본 연구에서는 고분자로서 polyetherimide(PEI) 를 이용하여 제막조건(고분자 농도, air gap, 용매, 내부응고제 주입량 등)을 달리하는 중공사막을 제조하여, 제막변수에 따른 막의 구조 및 기체투과 특성을 검토하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.323-325
• /
• 2007

$TiO_{2}$ electrode electrospun directly onto the substrate was developed for energy conversion device. To enhance energy conversion efficiency of dye-sensitized solar cell, electrodes should have higher surface area to absorb more dyes and higher conductivity to reduce recombination of generated electrons. $TiO_{2}$ nanofibers with higher surface areas were fabricated by annealing electrospun $TiO_{2}/PVP$ nanofibers at $500^{\circ}C$ for 3 hrs in air. it was revealed that $TiO_{2}$ nanofiber electrodes is hybrid with MWNT showed higher conductivity than $TiO_{2}$ semiconductor electrode possibly due to band gap change.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.297-302
• /
• 2018

Bead type and hollow fiber type catalyst (HFC, Hollow Fiber type Catalyst) was prepared by $La_{0.1}Sr_{0.9}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF1928) perovskite powder catalyst which showed excellent methane complete oxidation characteristics through previous studies. The HFC have a cylindrical shape with an empty interior, and pores can be formed through Phase inversion method so the specific surface area can be remarkably improved. In the case of the bead type catalyst prepared by adding Methyl Cellulose (MC), $SrCO_3$ was produced in addition to the original catalyst composition of LSCF1928 due to the reaction of $CO_2$ emitted from MC and Sr of the catalyst. In the case of the HFC, a single phase perovskite structure was obtained without impurities. The HFC calcined at $700{\sim}900^{\circ}C$ showed pore structure of finger-sponge-finger structure, and 99.9% oxygen conversion rate was achieved through complete oxidation of methane at $475^{\circ}C$. Air gap and spinning pressure condition were changed to control the HFC pore. 2 cm air gap and 7 bar spinning pressure showed the best catalytic performance and achieved oxygen conversion rates of more than 70.65%, 93.01%, and 99.99% at $425^{\circ}C$, $450^{\circ}C$ and $475^{\circ}C$, respectively.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.98-105
• /
• 2011

Cellulose triacetate (CTA) polymer among cellulose esters were used for preparing hollow fiber membranes by phase separation method to investigate the gas permeation properties. To endow gas separation properties, 1,4-dioxane and LiCl were used as additives in the polymer dope solution. The spinning conditions including spinning temperature were controlled to form an active skin layer on the hollow fiber surface. Scanning electron microscopy was used to examine morphology of surface and cross section of the prepared CTA hollow fibers. The gas permeation performance of CTA hollow fiber membranes showed $P_{CO2}$ = 17 GPU and ${\alpha}_{CO2/N2}$ = 48.

• Membrane Journal
• /
• v.22 no.3
• /
• pp.224-233
• /
• 2012

To improve permeation performance of gas separation membrane, polysulfone hollow fiber membrane was prepared by wet-dry phase inversion method using Triton X-100 as non-ionic additive. And variation of gas permeation behavior by additive was investigated. Various spinning conditions such as air gap, concentration of polymer, dope tank temperature were controlled and these effects were studied. The morphology and gas permeation property of hollow fiber membranes were investigated using scanning electron microscope (SEM) and bubble flow meter respectively. We confirmed that the membranes added with Triton X-100 had a smooth external skin at various air gap length conditions. The macrovoids of these hollow fiber membranes were more developed with increase of air-gap from 4 to 90 cm and that induced higher permeance. The permeance of polysulfone membranes has the higher value at comparatively lower concentration polymer (30 wt% polysulfone) and lower concentration of additive (15 wt% Triton X-100). When temperature in dope tank was controlled, the membranes prepared at $100^{\circ}C$ showed low permeance because of volatilization of additive and solvent.