• 한국주조공학회지
• /
• 제36권6호
• /
• pp.208-214
• /
• 2016

Casting defects, which are closely related to entrapped air bubbles and metallic oxides, occur very frequently in the casting process. Many researchers have shown that these defects can be reduced by adopting an appropriate gating system design. But, it is difficult for field engineers to identify a specific gating system that is more appropriate for their products. In this study, we tried to draw a comparison of gating system designs with and without ceramic foam filters. A ceramic foam filter was added to the horizontal runner just after the sprue to prevent air bubble generation and to reduce turbulence without change of the gating system design. To verify the effects of initial pouring velocity, the experiment was conducted with four different amounts of water volume in the reservoir. Results of the water modeling experiment applying the filter showed remarkably changed flow characteristics. Although the study confirmed that use of the filter may change the flow characteristics, it needs to be noted that only filter use alone cannot solve all the problems caused by a poorly designed gating system.

• 상하수도학회지
• /
• 제29권2호
• /
• pp.251-259
• /
• 2015

The main objective of this research is to study feasibility for applying metal membrane to remove particles from air scouring membrane backwash water. Also, the research was conducted to investigate the influence of polyamine coagulation on floc growth in membrane backwash water as pretreatment for removal particles. From the results of experiments for evaluating the influence of polyamine coagulation on floc growth, it was investigated that particles in the rage of $2{\sim}50{\mu}m$ grew up to $30{\sim}5,000{\mu}m$. In addition, all six metal membranes showed lower removal efficiency, which was 0.87~13.89%, in the case of no polyamine coagulant. On the other hand, in the case of injecting polyamine coagulant, those did extremely high efficiency in 56~92%. From the SEM(Scanning Electron Microscope) images of filtered wiremesh and metal foam membrane, sieve effects were predominant for liquid solid separation in wiremesh and adsorption and diffusion capture effects were predominant in metal foam membrane.

• 원예과학기술지
• /
• 제34권3호
• /
• pp.414-423
• /
• 2016

본 연구는 환경오염 감소와 암면 배지의 대체를 위해 새롭게 개발된 생육배지인 phenolic foam의 토마토 육묘용 배지로써의 이용가능성을 구명하기 위해 수행되었다. 토마토 'Madison' 품종을 4종류의 펠릿형 Grodan rockwool(GRW), UR rockwool(URW), phenolic foam LC(LC), phenolic foam LC-lite(LC-lite) 인공배지에 파종하여 육묘 후 19일 후에 4종류의 큐브형 인공배지에 이식하였다. 종자는 식물생장 챔버에($25{\pm}2^{\circ}C$, 상대습도 $90{\pm}5%$, 암발아) 4일 동안 발아시켰고, 발아가 시작 된 후에는 유리온실로 옮겨 두상 관수로 양액을 관수하였다. 토마토의 초장, 엽수, 엽면적, 생체중 및 건물중은 LC-lite 펠릿에서 육묘한 후 URW 큐브로 이식한 묘에서 생육이 우수하였다. 뿌리 등급은 LC 펠릿에서 육묘 후 LC와 LC-lite 큐브로 이식한 처리에서 가장 우수하였다. 배지의 화학성은 모든 배지에서 토마토의 생육에 안정적인 범위였다. URW의 물리성은 용기 용수량, 기상률, 총 공극에서 높은 값을 나타냈다. 그러므로, 신개발 배지인 phenolic foam은 토마토 묘의 초기 육묘와 뿌리 발달에 적합하여 암면 대체 가능성을 입증하였다.

• 한국대기환경학회지
• /
• 제29권2호
• /
• pp.217-227
• /
• 2013

Passive air samplers (PAS) have been developed since the early 2000s and widely used for the atmospheric monitoring of persistent organic pollutants (POPs). PAS are useful especially for the investigation of source-receptor relationship of POPs because they provide higher spatial resolution data. In Korea, however, only a few research groups have conducted POPs monitoring using PAS. One of the reasons for the limited application of PAS might be due to a complicated calculation method for air concentration. In this study, therefore, we introduced the principle of polyurethane foam (PUF)-PAS, which has been most widely used in the world, and provided an example of the calculation of air concentration of polycyclic aromatic hydrocarbons (PAHs). As all data tables and equations for this calculation were provided, this method can be used for the conversion of the amount of POPs (ng) in a PUF disk to air concentration ($ng/m^3$).

• 접착 및 계면
• /
• 제8권3호
• /
• pp.1-8
• /
• 2007

폴리우레탄 폼 소재에 평판형 플라즈마 전처리 방식을 적용시켜 접촉각 및 접착력을 향상시켰다. 플라즈마 반응기의 최적의 반응조건을 조사하기 위해서 반응가스(질소, 아르곤, 산소, 공기), 가스의 유량(30~150 mL/min), 그리고 반응시간(0~30초) 등을 변화시켜 전처리하여 진공식 플라즈마 방식과 비교 검토하였다. 처리 후 소재의 표면 변화는 SEM과 ATR-FTIR을 이용하여 측정하였다. 폴리우레탄 폼에서 질소의 유량이 100 mL/min이고 반응시간이 10초일 때 접촉각의 저하에 따른 가장 좋은 접착력의 결과를 보여 주었다. 결과적으로 평판형 플라즈마 조작 방식에 의한 처리로 폴리우레탄 폼의 접촉각과 접착박리강도가 개선되었음을 확인하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.618-623
• /
• 2008

To enhancement heat transfer performance, the metallic foam as heat exchanger was studied rapidly. This was attributed to its high surface area to volume ratio as well as intensive flow mixing by tortuous flow passages. So the experimental study about the heat transfer characteristic of metallic foam is presented in this paper. The material in this experiment was used as FeCrAl which has density of 10 ppi, 20 ppi and 30 ppi respectively. And the results show the heat transfer is rise with permeability Reynolds number increase and the pressure drop metallic foam was increased with the ppi increase.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.211-232
• /
• 2019

Porous ceramics are promising materials for a number of functional and structural applications that include thermal insulation, filters, bio-scaffolds for tissue engineering, and preforms for composite fabrication. These applications take advantage of the special characteristics of porous ceramics, such as low thermal mass, low thermal conductivity, high surface area, controlled permeability, and low density. In this review, we emphasize the direct foaming method, a simple and versatile approach that allows the fabrication of porous ceramics with tailored microstructure, along with distinctive properties. The wet foam stability is achieved under the controlled addition of amphiphiles to the colloidal suspension, which induce in situ hydrophobization, allowing the wet foam to resist coarsening and Ostwald ripening upon drying and sintering. Different components, like contact angle, adsorption free energy, air content, bubble size, and Laplace pressure, play vital roles in the stabilization of the particle stabilized wet foam to the porous ceramics. The mechanical behavior of the load-displacements curves of sintered samples was investigated using Herzian indentations testes. From the collected results, we found that microporous structures with pore sizes from 30 ㎛ to 570 ㎛ and the porosity within the range from 70% to 85%.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.304-310
• /
• 2018

본 연구에서는 경량 기포 콘크리트의 부피 안정성을 확보하기 위해 소포를 저감시킬 수 있는 요소들을 레올로지 특성을 연계하여 분석하였다. 실험계획으로는 비빔시간, 물-결합재비, 증점제, 기포제, 폐지 첨가량에 대한 변화로 각 요인을 통해 실험하였다. 먼저 과도한 비빔과 기포제의 첨가량에 의해 발생한 다량은 기포는 슬러리 내에서 불안정한 상태로 존재하여 침하를 발생시킨다. 특히 기포제의 경우 계면활성제로써 물에 영향을 미치므로 배합 계획 시 물에 대한 질량비로 계획해야할 것으로 판단된다. 또한 레올로지 특성을 통해 경량 기포 콘크리트의 소성점도와 소포량이 반비례관계를 가진 것을 확인할 수 있었다. 따라서 본 연구의 결과는 경량 기포 콘크리트의 소포를 저감시킬 수 있는 요소들을 분석함으로써 경량 기포 콘크리트의 배합 조건에 대한 기초적인 자료를 제공될 것으로 판단된다.

• 한국해양공학회지
• /
• 제33권4호
• /
• pp.313-321
• /
• 2019

The prediction of the hydrodynamic performance of a planing hull vessel is an important and challenging topic for computational fluid dynamic (CFD) applications to naval hydrodynamics. In this paper, the resistance and planing attitude analysis for a Fridsma hull, which is a prismatic planing hull, in still water are numerically studied using OpenFOAM. OpenFOAM is an open source code package based on C++ libraries and the finite volume method (FVM) for the discretization of the RANS equation. The volume of fluid method (VOF) is used to capture the water-air interface and the SST ${\kappa}-{\omega}$ model is used for the turbulence simulation. The overset mesh method is used to capture the large motion of the hull at higher speeds. Before the extensive analysis, uncertainty analyses using various time steps and grid sizes were performed for one ship speed case of Fn = 1.19. The results of the present study are compared with those of a model test, other CFD research, and Savitsky's empirical formula. The results of the present study, following the trend of other CFD results, slightly over predict the resistance and under predict the sinkage and, more significantly, the trim.

• 한국수자원학회논문집
• /
• 제56권10호
• /
• pp.603-617
• /
• 2023

본 연구는 포말대 흐름의 난류특성에 대한 이해를 목표로 한다. 포말대 흐름을 재현하기 위해 이중 댐-붕괴 파랑생성법이 제시되었다. 기존 단일 댐-붕괴 실험과 비교하여 이중 댐-붕괴 실험은 두 개의 수문의 개방 시간을 조절하여 처오름과 처내림의 다양한 상호작용을 구현할 수 있다. 수치모형으로는 OpenFOAM의 overInterDyMFoam이 활용되었다. overInterDyMFoam은 밀도가 다른 두 유체(i.e., 공기, 물)의 경계면 추적기법과 동격자 및 중첩 격자 기법을 결합한 모형이다. 질량보존 및 운동량 방정식으로는 𝜅-𝜖 난류모형이 결합된 이차원 Reynolds-Averaged Navier-Stokes 모형이 채택되었다. 수치모형실험 결과는 수리모형실험의 수심 및 흐름 방향 유속 시계열과 비교하여 정확도가 검증되었다. 난류 운동 에너지 분포특성을 확인하여 각 흐름 단계(i.e., 처오름, 처내림, 흐름의 상호작용)의 난류 진화 특성을 고찰하였다.