• 한국조리학회지
• /
• 제24권1호
• /
• pp.105-113
• /
• 2018

In this study, optimized pre-treatment conditions were investigated to improve the quality of gochujang apple jangachi. The moisture content was decreased by 14% in 60% sugar solution and 17% in 30% salt solution during 12 hours. On the one hand, in the case of dry sugar and salt method, moisture content was decreased rapidly by 20% and 24%, respectively during 12 hours. Compared with the sugar and salt solution method, the dry sugar and salt method was more effective in reducing moisture content during 12 hours. In the case of osmotic dehydration of the apple parts in the dry sugar method, the moisture content of the flesh, flesh including peel, and peel of apple decreased by 23%, 20%, and 16%, respectively during 6 hours. However, in the dry salt method, the moisture content of the flesh, flesh including peel, and peel of apple decreased by 19%, 12% and 13%, respectively during 2 hours. During this time, the pH tended to decrease, regardless of the presence of sugar and salt. Total acidity was slightly increased in the case of salt. In hot air drying after osmotic dehydration, the moisture content of flesh including peel of apple decreased from 64% and 67% to 31% and 27%, respectively at 90 minutes, and from 64% and 67% to 11% and 18% at 150 minutes, respectively. The moisture content of the peel decreased from 51% to 10% at 120 minutes. As a result of the sensory evaluation, the overall acceptance of the flesh and flesh including peel was highly evaluated, resultantly, the products were considered to be suitable for the production of gochujang apple jangachi.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2369-2377
• /
• 2012

The gas-phase dehydration of glycerol to acrolein was carried out over silicotungstic acid ($H_4SiW_{12}O_{40}{\cdot}xH_2O$, HSiW) catalysts supported on $SiO_2$, ${\eta}-Al_2O_3$, and silica-aluminas with different Al contents. The HSiW catalysts supported on silica-aluminas showed higher glycerol conversions and acrolein yields during the initial 2 h at $315^{\circ}C$ than did $SiO_2$- and ${\eta}-Al_2O_3$-supported HSiW catalysts. Among the tested catalysts, HSiW/$Si_{0.9}Al_{0.1}O_x$ exhibited the highest space-time yield during the initial 2 h. The loaded HSiW species can change the acid types and suppress the formation of carbonaceous species on Al-rich silica-aluminas. The deactivated HSiW supported on silica-aluminas can be fully regenerated after calcination in air at $500^{\circ}C$. As long as the molar ratio between water and glycerol was in the range of 2-11, the acrolein selectivity increased significantly with increasing water content in the feed, while the surface carbon content decreased owing to the suppression of heavy compounds.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.657-664
• /
• 2004

Titanium sulfate supported on $TiO_2$was prepared by impregnation of powdered $TiO_2$with an aqueous solution of titanium sulfate followed by calcining in air at high temperature. For Ti$(SO_4)_2/TiO_2$ samples calcined at 300 $^{\circ}C$, no diffraction lines of titanium sulfate are observed at $Ti(SO_4)_2$loading up to 30 wt%, indicating good dispersion of $Ti(SO_4)_2$ on the surface of $TiO_2$. The acidity of the catalysts increased in proportion to the titanium sulfate content up to 20 wt% of $Ti(SO_4)_2$. 20 wt% $Ti(SO_4)_2/TiO_2$ calcined at 300 $^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for these reactions, were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.408-415
• /
• 2007

Leaf vegetables are composed of about 80% of moisture and 20 to 30% are damaged during the transportation due to decomposition and browning. This study was conducted to develop a washing, sterilization dehydrating system that could remove these polluters, and major findings were summarized as followings. The system was constructed so that leaf vegetables were moved through the washing, sterilization, and dehydration stages contained in a box, the shifting was conducted using PLC-controlled pneumatic pressure. Basic tests for determination of design parameters led to the results that optimum washing times by air bubbles were 5 minutes for lettuce and perilla and 10 minutes for Chinese cabbage, and percentages of bacteria removed using the optimum washing times were 94, 98, and 76%, respectively. Optimum speed and time of a centrifugal dehydrator for removal surface waterdrop on the leaves were 400 rpm and 30 s, respectively, dehydration rates were in a range $70{\sim}82%$ and damage rates were within 15% for the three vegetables tested. Operating efficiencies of the developed system for lettuce, perilla, and Chinese cabbage were 100, 120, and 80 kg/h, respectively, which were 25, 24, and 27 times of operating efficiencies of the conventional manual method.

• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1785-1792
• /
• 2003

Zirconia modified with $MoO_3$ was prepared by impregnation of powdered $Zr(OH)_4$ with ammonium heptamolybdate aqueous solution followed by calcining in air at high temperature. Spectroscopic studies on prepared catalysts were performed by using FTIR, Raman, XRD, and DSC and by measuring surface area. Upon the addition of molybdenum oxide to zirconia up to 15 wt%, the specific surface area increased in proportion to the molybdate oxide content, while acidity measured by irreversible chemisorption of ammonia exhibited a maximum value at 3 wt% of $MoO_3$. Since the $ZrO_2$ stabilizes the molybdenum oxide species, for the samples equal to or less than 30 wt%, molybdenum oxide was well dispersed on the surface of zirconia and no phase of crystalline $MoO_3$ was observed at any calcination temperature above $400^{\circ}C$. The catalytic activities for cumene dealkylation were roughly correlated with the acidity of catalysts measured by ammonia chemisorption method, while the catalytic activities for 2-propanol dehydration were not correlated with the acidity because weak acid sites are necessary for the reaction.

• Journal of Forest and Environmental Science
• /
• 제36권4호
• /
• pp.267-273
• /
• 2020

Diospyros mespiliformis is a highly valued and threatened tree species within the Sahelo-Sudanian zone of Africa, but its seed germination requirements under cultivation are not well researched. In a first experiment which aimed at determining germination response of seeds to dehydration, fresh seeds were dried at room temperature for 26 days during which their moisture content, their germinability, and their viability were monitored at two-day intervals. In the second experiment, 14 pre-germination treatments were tested for their effect on the germination of dried seeds. Results showed that fresh seeds had 52.7% moisture and achieved 97.7% germination. As seeds were dried, percentage germination gradually decreased with decreasing moisture content and reached 0% when moisture content had dropped to 18%. Meanwhile, seed viability remained at 100% over drying duration. Seeds that were not germinated after air dry also recorded 100% viability. The most effective treatment for inducing germination of dried seeds was scarification using 98% sulfuric acid for 30 min which resulted in 96.6% germination. This study reports for the first time in D. mespiliformis seeds a desiccation-induced dormancy which can be efficiently alleviated by acid scarification. This study provides useful information that will contribute to efficient management of D. mespiliformis seed resources for propagation.

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.150-155
• /
• 2017

Proper cooling of PEM fuel cell stack is essential for the high-performance operation of fuel cell system. Insufficient cooling of the stack can cause significant damage to components due to overheating and also can decrease cell performance by dehydration of the polymer electrolyte. In the present study, we performed a computational analysis to assess the condition of the cooling system to secure the proper temperature in fuel cell stack system for high altitude long endurance (HALE) unmanned aerial vehicle (UAV).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.140-141
• /
• 2020

Concrete has a lower thermal conductivity or thermal diffusion coefficient compared to other building materials, so it is widely used as fireproof compartment material or refractory material for structures. However, in the event of thermal damage such as fire, cement curing agents and aggregates act differently, resulting in heat generation or deterioration of tissue due to dehydration, resulting in deterioration of physical properties and fire resistance. Therefore, in this study, the processing structure of cement paste is measured through nitrogen absorption method. The test specimen is a cement paste of 40% W/C and is set at 1000 ℃ under heating temperature conditions. As the temperature rose, the micro-pore mass below was reduced based on about 0.01 감소m, but the air gap above that was increased.Thus, in the range of pores measured in nitrogen adsorption, the air mass tended to decrease under high temperature conditions.

• 한국식품과학회지
• /
• 제41권2호
• /
• pp.146-150
• /
• 2009

Maltodextrin 30, 50, 80%의 농도로 생강 절편을 처리하여 탈수, 건조하였는데 maltodextrin 농도가 높을수록 탈수효율이 좋았으며 80% maltodextrin 처리된 생강은 최종 수분함량이 9.21%로 가장 탈수율이 좋았다. Maltodextrin 처리로 건조한 생강을 복원율, gingerol 함량, 색도, 관능평가 측면에서 열풍, 동결건조된 생강과 비교한 결과, maltodextrin 80% 처리한 생강의 복원율이 7.91 g/g로 열풍, 동결건조한 생강보다 복원율이 뛰어났다. Gingerol 함량은 maltodextrin 농도가 높을수록 함량이 많았는데 maltodextrin 80% 처리한 것이 1.19 mg/g로 가장 뛰어 났다. 색도의 L, a, b값은 maltodextrin 농도별로 유의적인 차이는 나타나지 않았고 대조구와 비교해서 유사한 경향을 나타냈다. 관능평가에서도 색도, 향, 조직, 외관, 종합적 기호도에서 maltodextrin 처리 시료가 다른 건조 방법에 비해서 보다 좋은 결과를 나타냈다. 그러므로 본 연구결과, maltodextrin을 처리하여 탈수, 건조하는 방법이 생강 절편의 건조에 있어서 복원율 등 품질과 비용 측면에서 열풍건조나 동결건조 방법보다 우수한 방법이라고 판단된다.

• 한국식품영양과학회지
• /
• 제19권2호
• /
• pp.121-126
• /
• 1990

Internal mass transfer during osmotic concentration of apples in sugar solutions was exami-ned as a function of concentration temperature and immersion time of those solutions using moisture loss sugar gain molality and rate parameter. Influence of osmotic concentration processes on browning reaction was also evaluated compared to control In creasin the concen-tration and temperature of sugar solutions increased moistrue loss sugar gain molality and rate parameter. Water loss was rapid early in the process and then levelled off, The same phenomena were occurred on sugar gain only in higher concentration(60$^{\circ}$ brix). IN lower concentration (30$^{\circ}$brix) sugar gain was gradually increased during whole process. Moisture loss during osmotic concentration using a sugar solution(60$^{\circ}$ brix 6$0^{\circ}C$) with 180min immer-sion time was 45.79% Effect of osmotic concentration befor air dried to 4% M.C(wet basis) on browning reaction was significant. Minimum browning reaction during air drying was carried out using a pretreatment such as osmotic concentration in sugar solution(60$^{\circ}$brix 45$^{\circ}C$) with 150min immersion time(O.D=0.01) compared to control(O.D=0.17)