• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.81-92
• /
• 2015

Construction waste mainly consists of concrete aggregates of various size. Improper handling of concrete waste would be a major environmental problem whereas its recycling would be both economically useful and environmentally friendly. Bigger concrete aggregates are crushed and converted to medium and fine particles to make them recyclable. An apparatus to separate the concrete aggregates by their size is thus needed for their effective recycling. In this work, segregation of concrete particles in air flows from a newly designed rotary separator having three stages of blades is simulated using a commercial software, ANSYS-CFX. Both 2-D and 3-D models with 360, 240 and 180 blades in each stage are considered. Fundamental mechanism of separation of particles(pase) and the effect of design parameters such as particle size, rotor speed, air flow rate etc. on the performance of the separator are investigated. Critical size of particles that can be separated by the developed separator is also presented in this work. Simulation results are overall in good agreement with data predicted from the theoretical model previously reported in the companion paper.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.821-828
• /
• 2005

To investigate the role of RH and temperature on the transport of chloride in the concrete, two groups of specimens were configured. For both groups, mix design was based on w/c=0.45, $400kg/m^3$ cement, $794kg/m^3$ fine aggregate and $858kg/m^3$ coarse aggregate. After specimen fabrication these were exposed to four different RH (35, 55, 75 and $95\%$ RH) and temperature (0, 20, 30 and $40^{\circ}C$) conditions. After 3 and 6 months $15\%$ NaCl exposure 5mm cores were taken. These cores were sliced and individual cores were ground to powder. In addition, to evaluate the effect of temperature on the chloride binding some powder samples were leached in the each of four temperature chambers. Chloride titration fur these was performed using FDOT acid titration method. Based upon the resultant data conclusions were reached regarding that 1) effective diffusion coefficient, $D_e$, increased with increasing exposure RH, suggesting that the size and number of water paths increased with elevated moisture content in the specimens, 2) $D_e$ increased with increasing temperature in the range of 0 to $40^{\circ}C$ possibly by elevated thermal activation of chloride ions and reduced chloride binding at higher temperature, 3) water soluble chloride concentration, $[Cl^-]_s$, increased with increasing temperature, and 4) chloride concentration profile for initially dry concrete specimens was higher than for the initially wet ones indicating pronounced capillary suction (sorption) occurred for the dry concrete specimens.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.493-501
• /
• 2019

In this work, ultra-fine calcium oxide (CaO) powder derived from eggshells is used as the starting material to synthesize mineral trioxide aggregate (MTA). The prepared CaO powder is confirmed to have an average particle size of 500 nm. MTAs are synthesized with three types of fine CaO-based powders, namely, tricalcium silicate (C3S), dicalcium silicate (C2S), and tricalcium aluminate (C3A). The synthesis behavior of C3S, C2S and C3A with ultra-fine CaO powder and the effects of C₃A content and curing time on the properties of MTA are investigated. The characteristics of the synthesized MTA powders are examined by X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), and a universal testing machine (UTM). The microstructure and compressive strength characteristics of the synthesized MTA powders are strongly dependent on the C3A wt.% and curing time. Furthermore, MTA with 5 wt.% C3A is found to increase the compressive strength and shorten the curing time.

• Journal of Korea Trade
• /
• v.24 no.3
• /
• pp.1-19
• /
• 2020

Purpose - This study empirically analyzes the effects of provisional anti-dumping duties levied on imports by Korea following anti-dumping investigations. An anti-dumping duty is a legal tool that countries use to impose duties on imports to offset injurious dumping. This study verifies how effective the imposition of a provisional anti-dumping duty is and whether such duties have trade chilling effects on aggregate imports. Specifically, this study examines import trade diversion from named to unnamed countries caused by the imposition of provisional anti-dumping duties. Design/methodology - This empirical analysis employs an econometric model of provisional anti-dumping measures for cases in which Korea imposed final affirmative anti-dumping measures. We construct a monthly panel dataset for each stage of anti-dumping investigation undertaken by Korea for all manufacturing industries during 1995-2013. We illustrate a stage-by-stage analysis of anti-dumping investigations from initiation, preliminary decision, imposition of provisional duty, final affirmative decision, and imposition of final affirmative duty on a monthly basis at the six-digit harmonized system code-level. Findings - For cases in which provisional duties are imposed, the reduction in imports from named countries outweighs the increase in imports from unnamed countries. The substantial reduction in imports from named countries is large enough to offset the import diversion to unnamed countries, suggesting that import diversion in investigations is limited during the investigation period. Therefore, the use of provisional anti-dumping duties in Korea is effective, providing evidence of a chilling effect on aggregate imports. Originality/value - Few studies examine the size of the effects on import trade diversion of the imposition of provisional anti-dumping duties. We contribute to the literature by disentangling separate trade effects for each phase of the anti-dumping investigation process and imposition of provisional duty.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.36-43
• /
• 2022

The general screen used to separate the particle size of recycled aggregate has restrictions when dealing with moisturized materials because of the blockage phenomenon. Therefore, in this study, to improve the separation efficiency of the conventional screen, the excellence of additional vibrating device based on spring was decided by a simulation experiment based on the discrete element method (DEM). The motion characteristic was investigated by analyzing the displacement, amplitude, and strain angle based on the spring design. Further, the particle motion was simulated by applying spring motion. The material flow and separation efficiency of the screen applied spring were confirmed as 9.2 kg/s and 97 %, respectively. Consequently, the improvement in the screen applied with blockage prevention spring was confirmed by comparing with the conventional screen.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.1
• /
• pp.19-23
• /
• 1975

In order to find out the effect of long-term annual additions of organic matter on the physico-chemical properties of paddy soil, the soil with and without compost application has been analysed. 1. There was no significant difference in the particle size distribution between compost and uncompost treatment, however, hydraulic conductivity, sedimention volume were remarkedly increased in compost. 2. Bulk density and soil strength were decreased in organic matter additions, but porosity increased. 3. Relative to Atterberg Limits, liquid limit, plastic limit, and elastic index were increased in compost. 4. Aggregate size distribution was slightly increased in additions of organic matter. 5. Regarding to chemical properties, pH, organic matter content, C.E.C. and extractable cation were increased in organic matter additions.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.357-366
• /
• 2017

Natural pigments are materials that express color and have been used in foods, cosmetics, medicine and so on. Since natural pigments are extracted from animals and plants, they are not uniform in size. Red pigments in particular are more lipophilic than other color pigments and tend to aggregate easily in aqueous solutions which make it difficult to reproduce the specific color due to size change. Found to be an allergen and the growing aversion for it to be used in foods, cochineal pigment, an animal pigment used for red pigments is being used less. In this study, red vegetable pigment lycopene extract and gardenia yellow was made uniform in size by ball-milling, then asymmetrical flow-field flow fractionation (AsFlFFF) and dynamic light scattering (DLS) were used to measure the size, and a color meter was used to confirm the color. Experimental results showed that the pigment particles were large in size and size distribution was wide before milling, but the size of the particles decreased and size distribution narrowed after milling. Color meter measurements showed that as the milling time increased, the size of the pigment particles decreased and the brightness, redness, and yellowness increased indicating a bright red color.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.414-422
• /
• 1995

Coal fly ash was calcined and elutriated for recycling as ceramic raw materials. C Crystal phases, morphologies, chemical components, particle size distributions and Ig. loss of as-received, calcined and elutriated coal fly ash were investigated to study the effects of the calci nation and elutriation on the coal fly ash classification. The experimental equations, which were used in elutriation of clay, were examined in order to find out which equation is appropriated for coal fly ash classification. It turned out that Rittinger's equation is relatively well matched for the fly ash. Having nothing to do with the treatment conditions, the crystal phases of coal f fly ash were mullite, quartz. Calcite peak was detected in as - received and elutriated coal fly a ash; however, it disappeared in calcined coal fly ash. As - received coal fly ash consists of various type of particles such as a cenosphere, coke type, silicate type, whisker type and aggregat e ed type. In case of calcined coal fly ash, coke type particles were eliminated and agglomerated type particles were relatively increased. Most of the particles that were relatively spherical cenosphere in the 4th step of elutriator. Particle size distribution was narrowed by calcination a and elutriation. Especially, in elutriation, particle size distribution was very narrow.

• Carbon letters
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2003

Recently, the control of pore-characteristics of nano-porous materials has been studied extensively because of their unique applications, which includes size-selective separation, gas adsorption/storage, heterogeneous catalysis, etc. The most widely adopted techniques for controlling pore characteristics include the utilization of pillar effect by metal oxide and of templates such as zeolites. More recently, coordination polymers constructed by transition metal ions and bridging organic ligands have afforded new types of nano-porous materials, porous metal-organic framework(porous MOF), with high degree and uniformity of porosity. The pore characteristics of these porous MOFs can be designed by controlling the coordination number and geometry of selected metal, e.g transition metal and rare-earth metal, and the size, rigidity, and coordination site of ligand. The synthesis of porous MOF by the assembly of metal ions with di-, tri-, and poly-topic N-bound organic linkers such as 4,4'-bipyridine(BPY) or multidentate linkers such as carboxylates, which allow for the formation of more rigid frameworks due to their ability to aggregate metal ions into M-O-C cluster, have been reported. Other porous MOF from co-ligand system or the ligand with both C-O and C-N type linkage can afford to control the shape and size of pores. Furthermore, for the rigidity and thermal stability of porous MOF, ring-type ligand such as porphyrin derivatives and ligands with ability of secondary bonding such as hydrogen and ionic bonding have been studied.

• Journal of Forest and Environmental Science
• /
• v.37 no.2
• /
• pp.116-127
• /
• 2021

Predicting carbon distribution of soil aggregates is difficult due to complexity in organo-mineral formation. This limits global warming mitigation through soil carbon sequestration. Therefore, knowledge of land use effect on carbon stabilization requires quantification of soil mineral cations. The study was conducted to quantify carbon and base cations on soil mineral fractions in Natural Forest, Plantation Forest and Farm Land. Five 0.09 ha were demarcated alternately along 500 m long transect with an interval of 50 m in Natural Forest (NF), Plantation Forest (PF) and Farm Land (FL). Soil samples were collected with soil cores at 0-15, 15-30 and 30-45 cm depths in each plot. Soil core samples were oven-dried at 105℃ and soil bulk densities were computed. Sample (100 g) of each soil core was separated into >2.0, 2.0-1.0, 1.0-0.5, 0.5-0.05 and <0.05 mm aggregates using dry sieve procedure and proportion determined. Carbon concentration of soil aggregates was determined using Loss-on-ignition method. Mineral fractions of soil depths were obtained using dispersion, sequential extraction and sedimentation methods of composite soil samples and sieved into <0.05 and >0.05 mm fractions. Cation exchange capacity of two mineral fractions was measured using spectrophotometry method. Data collected were analysed using descriptive and ANOVA at α_0.05. Silt and sand particle size decreased while clay increased with increase in soil depth in NF and PF. Subsoil depth contained highest carbon stock in the PF. Carbon concentration increased with decrease in aggregate size in soil depths of NF and FL. Micro- (1-0.5, 0.5-0.05 and <0.05 mm) and macro-aggregates (>2.0 and 2-1.0 mm) were saturated with soil carbon in NF and FL, respectively. Cation exchange capacity of <0.05 mm was higher than >0.05 mm in soil depths of PF and FL. Fine silt (<0.05 mm) determine the cation exchange capacity in soil depths. Land use and mineral size influence the carbon and cation exchange capacity of Gambari Forest Reserve.