• Clean Technology
• /
• v.28 no.4
• /
• pp.309-315
• /
• 2022

Research was conducted to derive the optimal operation conditions and the optimal cathode for using a DSA electrode as an anode to minimize electrode consumption during the removal of nitrogen from wastewater by the electro-chemical method. Of the various electrodes tested as cathodes, brass was determined to be the optimal electrode. It had the highest NO₃-N removal rate and the lowest concentration of residual NH₃-N, a by-product when Cl is present in the solution. Investigating the effect of current density found that when the initial concentration of NO₃-N was 50 mg L^-1, the optimal current density was 15 mA cm^-2. In addition, current densities above 15 mA cm^-2 did not significantly affect the NO₃-N removal rate. The effect of electrolytes on removing NO₃-N and minimizing NH₃-N was investigated by using Na₂SO₄ and NaCl as electrolytes and varying the reaction times. When Na₂SO₄ and NaCl are mixed at a ratio of 1.0 g L^-1 to 0.5 g L^-1 and reacted for 90 min at a current density of 15 mA cm^-2 and an initial NO₃-N concentration of 50 mg L^-1, the removal rate of NO₃-N was about 48% and there was no residual NH₃-N. On the other hand, when using only 1.5 g L^-1 of NaCl as an electrolyte, the removal rate of NO₃-N was the highest at about 55% and there was no residual NH₃-N.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.815-824
• /
• 2022

Among the main facilities of the power plant, the circulating water used for cooling the power generation system is supplied through the Circulation Water Intake Basin (CWIB). The vortexes of various types generated in the Pump Sump (PS) of CWIB adversely affect the Circulation Water Pump (CWP) and pipelines. In particular, the free surface vortex accompanied by air intake brings about vibration, noise, cavitation etc. and these are the causes of degradation of CWP performance, damage to pipelines. Then power generation is interrupted by the causes. Therefore, it is necessary to investigate the hydraulic characteristics of CWIB through the hydraulic model experiment and apply an appropriate Anti Vortex Device (AVD) that can control the vortex to enable smooth operation of the power plant. In general, free surface vortex is controlled by Curtain Wall (CW) and the submerged vortex is by the anti vortex device of the curtain wall. The detailed specifications are described in the American National Standard for Pump Intake Design. In this study, the circulating water intake part of the Tripoli West 4×350 MW power plant in Libya was targeted, the actual operating conditions were applied, and the vortex reduction effect of the anti vortex device generated in the suction tank among the circulating water intake part was analyzed through a hydraulic model experiment. In addition, a floor splitter was basically applied to control the submerged vortex, and a new type of column curtain wall was additionally applied to control the vortex generated on the free surface to confirm the effect. As a result of analyzing the hydraulic characteristics by additionally applying the newly developed Column Curtain Wall (CCW) to the existing curtain wall, we have found that the vortex was controlled by forming a uniform flow. In addition, the vortex angle generated in the circulating water pump pipeline was 5° or less, which is the design standard of ANSI/HI 9.8, confirming the stability of the flow.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.414-427
• /
• 2022

This study aims to analyze the color distribution of maxillary permanent incisors in Korean pediatric patients and determine the effects of age and root developmental stage on tooth color. The L^*a^*b^* values of 404 sound and fully erupted maxillary incisors without dental caries, restorations, trauma history or discoloration from 101 Korean patients between ages 7 and 15, with a mean age 10.0 ± 1.5, were analyzed with a spectrophotometer. CIE L^*a^*b^* values were 84.01, 0.17, and 24.07 in maxillary central incisors, and 82.33, 0.31, and 25.99 in maxillary lateral incisors. L^* values of maxillary central incisors were higher, and b^* values of maxillary central incisors were lower than those of maxillary lateral incisors (p < 0.001). The color differences among the subregions exceeded the clinical perceptibility threshold in both of the maxillary central and lateral incisors. L^* value for children at age 10 and younger was 84.13 in maxillary central incisors and 84.04 in maxillary lateral incisors, and those of older patients were 80.62 and 80.56, respectively. L^* value of maxillary incisors of children at age 10 and younger was significantly higher than that of older patients. The root developmental stage did not affect tooth color. This study suggests that the color differences between maxillary central and lateral incisors and among the subregions of a tooth and the effects of age should be considered for aesthetic restorations of permanent incisors in pediatric patients.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.673-680
• /
• 2022

In this study, based on PLA, we analyzed the Hounsfield Unit (HU) of materials containing 20% each of aluminum, wood, copper, carbon, and marble, and tried to analyze how they affect the image. A cylindrical phantom of 5×30×30 ㎣ (thickness×diameter×height) was fabricated using a entry-level 3D printer. The kV was changed to 80, 100 and 120, and the mAs was changed to 100 and 200 mAs, and the phantom in the center of the table was cross-scanned under a total of six conditions. A circular ROI was set using image J program and the quantification value of the material part HU and the quantification value of the peripheral part CNR were obtained. The HU average of the material part increased in the order of [PLA - wood 20%], [PLA - marble 20%], [PLA - carbon 20%], [PLA 100%], [PLA - aluminum 20%], [PLA - copper 20%] (p<0.05) a negative correlation was confirmed with the HU by increasing kV. It was confirmed that the CNR value in the peripheral area increased in the order of [PLA - marble 20%], [PLA - copper 20%], [PLA - carbon 20%], [PLA - wood 20%], [PLA - aluminum 20%], and [PLA - 100%] (p<0.05). Human organs with similar HU values for each material are [PLA - copper 20%] compact bone, [PLA - aluminum 20%] cancellous bone, [PLA 100%] coagulated blood, [PLA - carbon 20%] and [PLA - marble 20%] liver, muscle, spleen and [PLA - wood 20%] had similar values to fat. In addition, we confirmed the blur phenomenon that blurs the image around the filament with all materials, and confirmed that [PLA 100%] especially has the most blur around the filament. Therefore, it is considered desirable to reflect the HU value of the target organ and consider cloudiness around the phantom when selecting materials for medical phantom fabrication, and this research can provide basic data.

• Journal of Life Science
• /
• v.32 no.11
• /
• pp.872-881
• /
• 2022

In this study, we optimized the composition of the indole-3-acetic acid (IAA) production medium using response surface methodology on Pantoea agglomerans SRCM 119864 isolated from soil. IAA-producing P. aglomerans SRCM 119864 was identified by 16S rRNA gene sequencing. There are 11 intermediate components known to affect IAA production, hence the effect of each component on IAA production was investigated using a Plackett-Burman design (PBD). Based on the PBD, sucrose, tryptone, and sodium chloride were selected as the main factors that enhanced the IAA production at optimal L-tryptophan concentration. The predicted maximum IAA production (64.34 mg/l) was obtained for a concentration of sucrose of 13.38 g/l, of tryptone of 18.34 g/l, of sodium chloride of 9.71 g/l, and of L-tryptophan of 6.25 g/l using a the hybrid design experimental model. In the experiment, the nutrient broth medium supplemented with 0.1% L-tryptophan as the basal medium produced 45.24 mg/l of IAA, whereas the optimized medium produced 65.40 mg/l of IAA, resulting in a 44.56% increase in efficiency. It was confirmed that the IAA production of the designed optimal composition medium was very similar to the predicted IAA production. The statistical significance and suitability of the experimental model were verified through analysis of variance (ANOVA). Therefore, in this study, we determined the optimal growth medium concentration for the maximum production of IAA, which can contribute to sustainable agriculture and increase crop yield.

• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.371-381
• /
• 2022

This study causally investigates whether high school student with high science learning motivation becomes to achieve more or vice versa, and also how those two factors affect STEM career motivation. Research participants were 1st year students in a high school at Seoul. We surveyed their science learning motivation three times in the same time interval in the fall semester of 2021, and once a STEM career motivation in the third period. We collected data from 171 students with their mid-term and final exam scores, with which, we constructed and fitted an autoregressive cross-lagged model. The research model shows high measurement stability and fit indices. All the autoregressive and cross-lagged paths were statistically significant. However, standardized regression coefficients were larger in path from motivation to achievement compared to the opposite. Only science learning motivation shows significant direct effect on STEM career motivation, rather than achievement. For indirect effects, the first science learning motivation affected the final exam score and STEM career motivation, and the final exam score affected STEM career motivation. However, the final exam score did not have a total effect toward STEM career motivation. The result of this study shows reciprocal and cyclic causality between science learning motivation and achievement - in comparison, the effect of motivation for the opposite is larger than that of achievement. Also the result of this study strongly reaffirms the importance of science learning motivation. Instructional implications for strengthening science learning motivation throughout a semester was discussed, and a study for the longitudinal effect of science learning motivation and achievement in high school student toward future STEM vocational life was suggested.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.201-211
• /
• 2022

At the center of the Noryang waterway, the Gwangyang bay area (including the Yeosu Strait) is located at the west, and the Jinju bay area (including Gangjin bay and Sacheon bay) is located at the east. Freshwater from several rivers is flowing into the study area. In particula,r the event of flood, great quantities freshwater flow from Seomjingang (Seomjin river) into the Gwangyang bay area and from Gahwacheon (discharge from Namgang Dam) into the Jinju bay. The Gwangyang and Jinju bay are connected to the Noryang waterway. In addition, freshwater from Seomjingang and Gahwacheon also affect through the Noryang waterway. In this study, we elucidated the characteristics of the tidal exchange rate and residence time for dry season and flood season on 50 frequency, considering freshwater from 51 rivers, including Seomjingang and Gahwacheon, using a particle tracking method. We conducted additional experiments to determine the effect of freshwater from Seomjingang and Gahwacheon during flooding. In both the dry season and flood season, the result showed that the particles released from the Gwangyang bay moved to the Jinju bay through the Noryang waterway. However, comparatively small amount of particles moved from the Jinju bay to the Gwangyang bay. Each experimental case, the sea exchange rate was 44.40~67.21% in the Gwangyang bay and 50.37~73.10% in the Jinju bay, and the average residence time was 7.07~15.36days in the Gwangyang bay and 6.45~12.75days in the Jinju bay. Consequently the sea exchange rate increased and the residence time decreased during flooding. A calculation of cross-section water flux over 30 days for 7 internal and 5 external areas, indicated that the main essential flow direction of the water flux was the river outflow water from Seomjingang flow through the Yeosu strait to the outer sea and from Gahwacheon flow through Sacheon bay, Jinju bay and the Daebang waterway to the outer sea.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.8
• /
• pp.131-143
• /
• 2021

In this study, the factors influencing the satisfaction of the online platform musical viewing method were investigated, and the effect of the satisfaction factors on the recommendation intention and rewatching intention of the online platform viewing method for musicals was investigated. In addition, the effect of the survey subjects' degree of involvement to musicals between the satisfaction of the online platform-based musical viewing method and recommendation intention, and rewatching intention was investigated. Satisfaction factors of online platform musicals, which are independent variables, were classified into image quality, convenience, economy, and interactivity, and dependent variables were classified into recommendation intention and rewatching intention of online platform musicals, and moderator variable was set to degree of involvement to musicals, and a total of 20 hypotheses were established. An online survey was conducted on 1,454 audiences who had experience watching musicals through the online platform from August 28 to September 7, 2021, and a total of 1,418 answers were used as valid samples. As a result of the analysis, the factors that make up the satisfaction of online platform musicals appeared in the order of convenience, video quality, economics, and interactivity. It was found that the satisfaction level of watching online platform musicals had a positive effect on the intention to recommend and rewatching online platform musicals in the path of all satisfaction factors. It was found that the moderating effect of the audience's involvement in musicals between online platform musical viewing satisfaction and recommendation intention and rewatching intention had a significant effect only between image quality and recommendation intention. It shows that audiences with high involvement in musicals have intention to recommend only when they are satisfied with the video quality of online platform musicals. Particularly important point is that the convenience factor was found to have the greatest influence on the satisfaction of online platform musical viewing method, but the image quality factor was found to have the greatest influence on the recommendation intention and rewatching intention of online platform musicals.

• 지역과문화
• /
• v.7 no.2
• /
• pp.173-202
• /
• 2020

This study aims to enhance the family-friendliness of the region by examining the relationship between family relations and the community environment, and objectively comparing the local environment surrounding the family. To this end, we reviewed the areas of socio-cultural and economic sectors that affect the family relationship satisfaction, and in particular, analyzed the trend of changes in regional index by utilizing the Korean Family Happiness Composite Index (KFHCI) developed as a community indicators. This index utilizes community indicators published in the National Statistical Portal's "e-Region indicators," and these variables are related to family relationship satisfaction. Therefore, this study compared the seven areas of the Family Happiness Composite Index (Population Family, Health Culture, Education, Income Consumption, Employment Labor, Housing Transportation, Environment and Social Integration) by region, and examined the trends for 10 years. According to the study, the average score of KFHCI's entire region was rising from 2008 to 2018. Overall, the community environment that affects family relationship satisfaction is also improving. The regions belonging to the upper level were Jeonnam, Gangwon, Chungnam, Jeonbuk, and Gyeongbuk. Areas belonging to the lower level are Seoul, Busan, Daegu, Incheon, and Gwangju. In almost sectors, the lower-level regions did not have sufficient physical infrastructure compared to population density and over-density, and improved little by little, but not enough to reflect the needs of local people and improve the quality of life. In the future, we should develop more regular and complementary indicators to develop customized policies for each region that can improve the quality of family relationships. It will also be necessary to study the impact of each index field when a socioeconomic crisis occurs due to social disasters, and try to change indicators

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.1
• /
• pp.51-60
• /
• 2021

Purpose: Radiocarpal dislocation (RCD), which is caused by high-energy trauma, often involves radial styloid fractures and short radiolunate ligament (SRLL) injuries. Although SRLL injuries may occur as a simple rupture at the attachment site of radius, it may occur with a relatively large avulsed-fragment in the volar rim of the lunate facet of the radius. This study aimed to differentiate the injury type of SRLL and assess the differences in the treatment results depending on the treatment methods that have been applied in RCD with radial styloid fractures. Materials and Methods: Eighteen patients managed surgically with RCD were enrolled in this study. The patients were classified as Group 1 and Group 2 by using the Dumontier method. In this study, Group 2 was subdivided into 2A (purely ligamentous or small avulsion fracture of the volar rim of lunate facet) and 2B (large avulsed-fragment enough to internal fixation) according to the injury type of SRLL. Groups 2A and 2B were treated with direct repair and screw fixation, respectively. Pain, range of motion of the wrist joint, grip strength, and complications on final radiographs were examined. The outcomes were evaluated using patient-rated wrist evaluation (PRWE), and modified Mayo wrist score (MMWS). Results: All patients were Group 2 (six and twelve patients in 2A and 2B, respectively). The mean flexion to extension arch recovered 79%,and the mean grip strength was 72.9% of the uninjured side. Group 2A showed better recovery in extension, flexion and pronation than Group 2B, but there was no difference in radial deviation, ulnar deviation, supination, grip strength and pain. No differences in the PRWE and MMWS were observed between two groups. Complications included traumatic arthritis in seven patients and residual instability in five patients. Conclusion: When the SRLL was injured, the involvement of a large avulsion fracture on the anterior plane of the radiolunate did not affect the test results. On the other hand, it should be observed cautiously because avulsion fractures tend to disturb the joint's reduction through rotation or displacement. In addition, anatomical reduction and sturdy internal fixation are important for restoring the function of the SRLL.