• Korean Journal of Pharmacognosy
• /
• v.39 no.1
• /
• pp.68-73
• /
• 2008

The present study represents the screening of the protective effects of herbal methanolic extracts from Baekdu mountain against tacrine-induced cytotoxicity in HepG2 cells. Tacrine is an acetylcholinesterase inhibitor, and used for the treatment of Alzheimer's disease. However, administration of tacrine for the treatment of Alzheimer's disease results in a reversible hepatotoxicity in 30-50% of patients, consequently limiting clinical use. Therefore, studies for natural products with protective effect on the tacrine-induced hepatotoxicity would be valuable as providing potential therapeutic use. 109 plant sources were collected in Baekdu mountain, and extracted with methanol. These extracts had been screened the protective effects against tacrine-induced cytotoxicity in HepG2 cells at the 100 and 300 ${\mu}g/ml$. Of these, ten methanolic extracts, roots of Ampelosis japonica, aerial parts of Berberis amurensis, aerial parts of Sedum aizoon, aerial parts of Lespedeza tomentosa, aerial parts of Lespedeza juncea, aerial parts of Hypenricum ascyron, stem barks of Syringa reticulata, fruits of Gleditsia japonica, aerial parts of Chamaenerion angustifolium, branches of Ginkgo biloba, showed significant protective effects against tacrine-induced cytotoxicity in HepG2 cells.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.67-76
• /
• 2008

Recently, one of the most outstanding technological characteristics of aerial survey is an application of Direct Georeferencing, which is based on the integration of main sensing sensors such as aerial camera or Lidar with positioning sensors GPS and IMU. In addition, a variety of digital aerial mapping cameras is developed and supplied with the verification of their technical superiority and applicability. In accordance with this requirement, the development of a multi-looking aerial photographing system is just making 3-D information acquisition and texture mapping possible for the dead areas arising from building side and high terrain variation where the use of traditional phptogrammetry is not valid. However, the development of a multi-looking camera integrating different sensors and multi-camera array causes some problems to conduct time synchronization among sensors and their geometric and radiometric calibration. The establishment of a test field for aerial sensor calibration is absolutely necessary to solve this problem. Therefore, this paper describes investigations for photogrammetric Test Field of foreign countries and suggest an establishment scheme for domestic test field.

• Korean Journal of Weed Science
• /
• v.18 no.1
• /
• pp.42-47
• /
• 1998

The experiment was conducted to study the growth, developmental pattern, and seed production of Commelina benghalensis L. grown from four seed types; large and small aerial seeds, and large and small underground seeds. Plants from the four seed types differed in growth rate. Based on dry weight and leaf area, plants from large underground seeds emerged and grew faster in the first 2-4 weeks after seeding(WAS) but plants from small aerial seeds grew faster during the 4-6 WAS; thereafter, there was no significant difference in growth rate among plants from the four seed types. Based on seed production, plants from large aerial seed produced more seeds(1473) than those from small seeds(1006). Small aerial types represented 75-77% of the total seed production, large aerial seed 21-23%; only 2-4% were underground seeds. The results suggest that the plants from large underground seeds might have better competitive ability Than those of small aerial seeds during the early growth stage due to faster germination and higher dry matter production.

• Spatial Information Research
• /
• v.16 no.2
• /
• pp.173-192
• /
• 2008

Recent climate fluctuation and environmental change at global scale are causing more incidences of disasters and calamities over the world. In a response to this environmental crisis, international collaboration for Earth Observation(EO) is obtaining more significance in order to understand, watch, and forecast changes in the earth system. As such, aerial monitoring based on remotely sensed data, indispensable for EO, is also drawing more attentions. In this context, we discuss diverse aspects of future developments in the Korean domestic system for aerial monitoring. This paper first thoroughly examines current status of national and international collaboration system arid research of aerial monitoring. It then suggests specific development plans for four critical dimensions such as research, organization, institutional systems, and strategies. Our study would facilitate systematically establishing policies for aerial monitoring in Korea and creating a domestic GEOSS(Global Earth Observation System of Systems) in the near future.

• Journal of the Korea Convergence Society
• /
• v.8 no.4
• /
• pp.183-188
• /
• 2017

As the price of small UAVs is getting cheaper and its controllability is getting greatly increased, many aerial applications using both fixed-wing and hoverable UAVs have appeared in recent years. In this paper, a new aerial advertising method is proposed using four hoverable UAVs. Using the UAV swarm control method, four UAVs are maneuvered to carry a $7.07{\times}7.07m^2$ square banner along collision-free and predefined waypoints for aerial advertising. According to simulation results, it takes about 270 s for UAVs to perform aerial advertising in $669{\times}669m^2$ size area and the minimum distance among UAVs turns out to be 0.45 m which proves there is no any collision. Due to abrupt direction changes of UAVs along the predefined waypoints, UAVs cannot always maintain exact square formation and it results the maximum and minimum side lengths of square formation to be 10.35 m and 1.96 m, respectively. Also, the maximum and minimum diagonal lengths of square formation turn out to be 14.75 m and 2.78 m, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.531-537
• /
• 2010

Real-time Aerial Monitoring System performs the rapid mapping in an emergency situation so that the geoinformation could be constructed in near real time. In this system, the position and attitude information from GPS/INS integration algorithm is used to perform the aerial triangulation(AT) without GCPs. Therefore, if we obtain Exterior Orientation(EO) estimates from AT sequentially, EO are used as the measurements in the Kalman filter. In this study, we simulate the GPS/IMS/Image data for an UAV-based aerial monitoring system and compare the GPS/INS/AT with and without from AT. Comparative analysis showed that result from the GPS/INS/AT with EO update is more accurate than without the update. However, when the vehicle turns, the position error significantly increases which need more analysis in the future.

• Korean Journal of Remote Sensing
• /
• v.20 no.5
• /
• pp.337-351
• /
• 2004

Our laboratory originally developed the compact, multi-spectral, automatic aerial photographic system PKNU3 to allow greater flexibility in geological and environmental data collection. We are currently developing the PKNU3 system, which consists of a color-infrared spectral camera capable of simultaneous photography in the visible and near-infrared bands; a thermal infrared camera; two computers, each with an 80-gigabyte memory capacity for storing images; an MPEG board that can compress and transfer data to the computers in real-time; and the capability of using a helicopter platform. Before actual aerial photographic testing of the PKNU3, we experimented with each sensor. We analyzed the lens distortion, the sensitivity of the CCD in each band, and the thermal response of the thermal infrared sensor before the aerial photographing. As of September 2004, the PKNU3 development schedule has reached the second phase of testing. As the result of two aerial photographic tests, R, G, B and IR images were taken simultaneously; and images with an overlap rate of 70% using the automatic 1-s interval data recording time could be obtained by PKNU3. Further study is warranted to enhance the system with the addition of gyroscopic and IMU units. We evaluated the PKNU 3 system as a method of environmental remote sensing by comparing each chlorophyll image derived from PKNU 3 photographs. This appraisement was backed up with existing study that resulted in a modest improvement in the linear fit between the measures of chlorophyll and the RVI, NDVI and SAVI images stem from photographs taken by Duncantech MS 3100 which has same spectral configuration with MS 4000 used in PKNU3 system.

• Animal Bioscience
• /
• v.34 no.12
• /
• pp.1981-1986
• /
• 2021

Objective: This study aimed to investigate the effect of Salvia miltiorrhiza (S.m.) aerial parts as an alternative ingredient on growth performance, nutrient digestibility, and digestive enzymes in growing rabbits. Methods: Treatments included five tested diets: a control (basal diet), antibiotic (basal diet+enramycin at 5 mg/kg), and S.m. aerial parts powder added at 3.0%, 6.0%, and 9.0% of feed using 300 growing rabbits. Results: The diets with S.m. aerial parts addition at 9.0% decreased (p<0.05) feed/gain compared to the control, but there were no differences in feed intake and body weight gain. In contrast with the control, the addition of antibiotic increased (p<0.05) digestibility of dry matter, crude protein, energy, fiber, and ash. The herb addition did not cause differences in the digestibility of most nutrients compared to the antibiotic, but fiber digestibility of the herb at 6.0% and 9.0% was lower (p<0.05) than that of the antibiotic. Moreover, the antibiotic and the herb also similarly increased (p<0.05) the activities of duodenal α-amylase, maltase, lipase, and trypsin, compared to the control, and the herb at 6.0% and 9.0% showed a greater (p<0.05) activity of elastase than the dose 3.0%. Conclusion: The obtained data indicate that S.m. aerial parts can be a potential forage in rabbit's diet at 9.0% with a beneficial regulation on nutrition and digestion.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.3
• /
• pp.23-29
• /
• 2019

Conventional crack detection methods have a problem of consuming a lot of labor, time and cost. To solve these problems, an automatic detection system is needed to detect cracks in images obtained by using vehicles or UAVs(unmanned aerial vehicles). In this paper, we have studied road crack detection with unmanned aerial photographs. Aerial images are generated through preprocessing and labeling to generate morphological information data sets of cracks. The generated data set was applied to the mask R-CNN model to obtain a new model in which various crack information was learned. Experimental results show that the cracks in the proposed aerial image were detected with an accuracy of 73.5% and some of them were predicted in a certain type of crack region.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.1
• /
• pp.24-30
• /
• 2022

Objective: The purpose of this study was to determine the factors of successful and unsuccessful movements through the analysis of kinematics and muscle activity of the Free Aerial Cartwheel on the balance beam. Method: Subjects (Age: 22.8 ± 2.4 yrs., Height: 158.7 ± 5.0 cm, Body mass: 54.1 ± 6.4 kg, Career: 13 ± 2.4 yrs.) who were currently active as female gymnasts participated in the study. They had no history of surgical treatment within 3 months. Subject criteria included more than 10 years of professional experience in college and professional level of gymnastics and the ability to conduct the Free Aerial Cartwheel on the Balance Beam. Each subject performed 10 times of Free Aerial Cartwheel on the balance beam. One successful trial and one unsuccessful trial (failure) among 10 trials were selected for the comparison. Results: It was found that longer time required in case of unsuccessful trial when performing the Free Aerial Cartwheel on the balance beam compared with successful trial. It is expected to be the result of movement in the last landing section (i.e. phase 5). In addition, it was found that the center of gravity of the body descends at a high speed to perform the jump (i.e. phase 2) in order to obtain a sufficient jumping height when the movement is successful while the knee joint is rapidly extended to perform a jump when movement fails. In the single landing section after the jump (i.e. phase 4), if the ankle joint rapidly dorsiflexed after take-off and the hip joint rapidly flexed, so landing was not successful. Conversely, in a successful landing movement, muscle activity of the biceps femoris was greatly activated resulting no shaking in the last landing section (i.e. phase 5). Conclusion: In order to succeed in this movement, it is necessary to perform a strong jump after rapidly descending the center of gravity of the body using the force of the biceps femoris muscle. Further improvement of the skills on the balance beam requires the analysis of the game-like situation with continuous research on kinematic and kinematic analysis of various techniques, jumps, turns, etc.