• 제목/요약/키워드: admittance function

검색결과 42건 처리시간 0.021초

New estimation methodology of six complex aerodynamic admittance functions

  • Han, Y.;Chen, Z.Q.;Hua, X.G.
    • Wind and Structures
    • /
    • 제13권3호
    • /
    • pp.293-307
    • /
    • 2010
  • This paper describes a new method for the estimation of six complex aerodynamic admittance functions. The aerodynamic admittance functions relate buffeting forces to the incoming wind turbulent components, of which the estimation accuracy affects the prediction accuracy of the buffeting response of long-span bridges. There should be two aerodynamic admittance functions corresponding to the longitudinal and vertical turbulent components, respectively, for each gust buffeting force. Therefore, there are six aerodynamic admittance functions in all for the three buffeting forces. Sears function is a complex theoretical expression for the aerodynamic admittance function for a thin airfoil. Similarly, the aerodynamic admittance functions for a bridge deck should also be complex functions. This paper presents a separated frequency-by-frequency method for estimating the six complex aerodynamic admittance functions. A new experimental methodology using an active turbulence generator is developed to measure simultaneously all the six complex aerodynamic admittance functions. Wind tunnel tests of a thin plate model and a streamlined bridge section model are conducted in turbulent flow. The six complex aerodynamic admittance functions, determined by the developed methodology are compared with the Sears functions and Davenport's formula.

현장 풍속 특성을 반영한 콘크리트 사장교의 버페팅 응답 (Buffeting Responses of Concrete Cable-stayed Bridge Considering Turbulent Characteristics of Bridge Site)

  • 김성호;임성순;권순덕
    • 대한토목학회논문집
    • /
    • 제31권2A호
    • /
    • pp.97-104
    • /
    • 2011
  • 본 연구에서는 교량 현장에서 계측한 풍속 스펙트럼을 풍동에서 구현하고, 콘크리트 사장교를 대상으로 공력 어드미턴스함수를 측정하였다. 그리고 현장 측정한 난류 특성을 바탕으로 콘크리트 사장교의 3차원 버페팅 해석을 수행하였다. 본 연구의 결과를 보면 적절히 공력 어드미턴스함수를 고려할 경우에 고려하지 않은 경우보다 버페팅 응답이 절반 가까이 줄어드는 것으로 나타났다. 그리고 격자난류를 사용할 경우에 저주파 영역에서 공력 어드미턴스 함수가 낮아서 풍하중을 과소평가할 가능성이 있는 것으로 나타났다. 공력 어드미턴스 함수가 버페팅 응답에 미치는 영향이 상당하므로 향후 교량의 버페팅 해석시 플러터계수나 능동난류로부터 추출한 공력 어드미턴스 함수를 사용할 것을 추천한다.

정전형 마이크로 엑츄에이터의 주파수 응답 특성 해석 (Frequency Response Analysis of Electrostatic Microactuators)

  • 민동기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 C
    • /
    • pp.1982-1984
    • /
    • 2002
  • The admittance of one-port electrostatic actuator are modeled using the steady-state sinusoidal response. Also the admittance of the differential type actuator is derived taking the practical conditions into consideration, although it has no admittance in ideal case. It is a function of biasing error, driving error, and capacitive mismatch including parasitic capacitors. The validity of the admittance model is proved by comparing between the modeled and measured admittances. The distortion in the frequency response curve measured by a capacitive sensor is analyzed and it is concluded that the admittance is the main cause of this distortion.

  • PDF

구동점 어드미턴스 함수를 이용한 등가 시스템 (Equivalent System Using Driving-Point Admittance Function)

  • 홍준희;정병태;조경래;정해성;박종근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 추계학술대회 논문집 학회본부
    • /
    • pp.75-77
    • /
    • 1994
  • This paper presents a method of obtaining transmission network equivalents from the network's driving-point admittance characteristic. Proposed method is based on modal decomposition representation for the large-scale interconnected system. As a result, Norton-type of discrete-time filter model can be generated. It can reproduce the driving-point admittance characteristic of the network. Furthermore proposed model can be implemented into the EMTP in a direct manner. The simulation results with the full system representation and the developed equivalent system showed a good agreement.

  • PDF

Relaxation Characteristic of the Disordered Lead Scandium Niobate

  • Kim, Yeon Jung
    • Applied Science and Convergence Technology
    • /
    • 제24권3호
    • /
    • pp.47-52
    • /
    • 2015
  • The correlation between admittance and dielectric spectroscopy of dielectric relaxation in lead scandium noibate, have been investigated. Lead scandium niobate, with composition $PbSc_{0.5}Nb_{0.5}O_3$, was prepared by conventional solid state synthesis. Conductance Y'(G), susceptance Y"(B) and capacitance C of lead scandium niobate as a function of frequency and temperature were measured. From the temperature-dependence of RLC circuit, insight into physical significance of the dielectric properties of lead scandium niobate is obtained. The relative strong frequency dependent of dielectric properties in lead scandium niobate is observed, and the phase transition occurred at a broad temperature region. Also, the value of critical exponent ${\gamma}$=1.6 showed on heating process. The long relaxation times part enlarged diffuse by conductivity effects with increasing temperature, and the ordering between $Sc^{3+}$ and $Nb^{5+}$ in PSN influences complex admittance and dielectric properties. Confirmed the typical characteristic of lead-type relaxor in the Raman spectra of lead scandium niobate and major ranges are between 400 and $900cm^{-1}$.

Linearized analysis of the internal pressures for a two-compartment building with leakage

  • Yu, Xianfeng;Gu, Ming;Xie, Zhuangning
    • Wind and Structures
    • /
    • 제28권2호
    • /
    • pp.89-97
    • /
    • 2019
  • The non-linear equations governing wind-induced internal pressures for a two-compartment building with background leakage are linearized based on some reasonable assumptions. The explicit admittance functions for both building compartments are derived, and the equivalent damping coefficients of the coupling internal pressure system are iteratively obtained. The RMS values of the internal pressure coefficients calculated from the non-linear equations and linearized equations are compared. Results indicate that the linearized equations generally have good calculation precision when the porosity ratio is less than 20%. Parameters are analyzed on the explicit admittance functions. Results show that the peaks of the internal pressure in the compartment without an external opening (Compartment 2) are higher than that in the compartment with an external opening (Compartment 1) at lower Helmholtz frequency. By contrast, the resonance peak of the internal pressure in compartment 2 is lower than that in compartment 1 at higher Helmholtz frequencies.

다이아몬드 터닝 머시인의 극초정밀 절삭공정에서의 시스템 규명 및 제어 (System identification and admittance model-based nanodynamic control of ultra-precision cutting process)

  • 정상화;김상석;오용훈
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.1352-1355
    • /
    • 1996
  • The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surface. However, as the accuracy requirement gets tighter and desired surface contours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining process prohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normal to the face of the workpiece can be filtered through an appropriate admittance transfer function to result in the estimated depth of cut. This can be compared to the desired depth of cut to generate the adjustment control action in addition to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. The recursive least-squares algorithm with forgetting factor is proposed to identify the parameters and update the cutting process in real time. The normal cutting forces are measured to identify the cutting dynamics in the real diamond turning process using the precision dynamometer. Based on the parameter estimation of cutting dynamics and the admittance model-based nanodynamic control scheme, simulation results are shown.

  • PDF

어드미턴스 모델을 이용한 다이아몬드 터닝머시인의 극초정밀 제어 (Admittance Model-Based Nanodynamic Control of Diamond Turnning Machine)

  • 정상화;김상석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 춘계학술대회 논문집
    • /
    • pp.49-52
    • /
    • 1996
  • The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. The limitation of this control scheme is that the feedback signal does not account for additional dynamics of the tool post and the material removal process. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surfice. However, as the accuracy requirement gets tighter and desired surface contours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining processprohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normalto the face of the workpice can be filterd through an appropriate admittance transfer function to result in the estimated depth of cut. This can be compared to the desired depth of cut to generate the adjustment cotnrol action in addition to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. Based on the empirical data of the cutting dynamics, simulation results are shown.

  • PDF

가우스 잡음을 고려한 비선형 펄스 변조 시스템의 안정도 분석 (Stability Analysis of Nonlinear Pulse-Modulated System Subject to Gaussian Noise)

  • 강영채
    • 대한전자공학회논문지
    • /
    • 제19권6호
    • /
    • pp.67-79
    • /
    • 1982
  • 가우스 잡음의 출현시 PWM 시스템의 안정도가 연구되었다. 일반 시스템은 종래의 서술 함수 방법을 이용할 때 비선형 소자와 선형 소자로 나누어진다. 등가 어드미턴스 개념이 이 시스템의 비선형 소자의 전달 특성을 구하는데 사용되었다. 이 논문에서는 가우스 잡음만이 존재하는 경우 자기 발진 조건이 유도되었고 그 결과를 컴퓨터 시뮬레이션으로 분석하였다. The stability of general pulse-width modulation system with Gaussian random disturbance was discussed . General system is divided into nonlinear and linear elements using the conventional describing function method. The concept of the equivalent admittance was used to find the transfer characteristic of the nonlinear element of the system. In this paper the self-sustained oscillation condition in the autonomous system was derived and the results was analyzed with computer simulation.

  • PDF

Dielectric relaxation properties in the lead scandium niobate

  • Yeon Jung Kim
    • 한국표면공학회지
    • /
    • 제56권4호
    • /
    • pp.227-232
    • /
    • 2023
  • In this study, complex admittance as a function of temperature and frequency was measured to analyze the important relaxation properties of lead scandium niobate, which is physically important, although it is not an environmentally friendly electrical and electronic material, including lead. Lead scandium niobate was synthesized by heat treating the solid oxide, and the conductance, susceptance and capacitance were measured as a function of temperature and frequency from the temperature dependence of the RLC circuit. The relaxation characteristics of lead scandium niobate were found to be affected by contributions such as grain size, grain boundary characteristics, space charge, and dipole arrangement. As the temperature rises, the maximum admittance and susceptance increase in one direction, but the resonance frequency decreases below the transition temperature but increases after the phase transition.