• Journal of Preventive Medicine and Public Health
• /
• v.55 no.1
• /
• pp.1-9
• /
• 2022

An index that evaluates the health level of a population group considering both death and loss of function due to disease is called a summary measure of population health (SMPH). SMPHs are broadly divided into life year indices and life expectancy indices, the latter of which comprise healthy life expectancy (HLE). HLE is included as a policy target in various national and regional level healthcare plans, and the term "HLE" is commonly used in academia and by the public. However, the overall level of understanding of HLE-such as the precise definition of HLE and methods of calculating HLE-still seems to be low. As discussed in this study, the types of HLE are classified into disability-free life expectancy, disease-free life expectancy, quality-adjusted life expectancy, self-rated HLE, and disability-adjusted life expectancy. Their characteristics are examined to facilitate a correct understanding and appropriate utilization of HLE. In addition, the Sullivan method, as a representative method for calculating HLE, is presented in detail, and major issues in the process of calculating HLE, such as selection of the population group and age group, estimation of death probability, calculation of life years, and incorporation of health weights, are reviewed. This study will help researchers to select an appropriate HLE type and evaluate the validity of HLE research results, and it is expected to contribute to the vitalization of HLE research.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.355-357
• /
• 2004

소프트웨어의 측정은 소프트웨어의 생명주기 초기에 분석되어 규모와 비용의 예측에 도움을 주어야 한다. 초기에는 정확한 LOC 기반 규모예측이 어려워 기능 점수 기반의 측정에 의하여 예측할 수 있다. 그러나 현재의 기능 점수 기반 측정은 모든 시스템에 획일화되어 있어 시스템의 특성을 반영할 수 없으며, IFPUG에서 제시한 일반 시스템 특성은 웹 기반 어플리케이션에서 사용자의 인지도가 매우 낮다. 본 논문에서는 웹 기반 어플리케이션 중에 동적 웹사이트에 특화된 시스템 특성 집합 및 영향도 측정 방법을 제시한다. 이 요소를 근거로 동적 웹사이트의 시스템 특성을 분석하여 기능 정수의 값 조정 인자에 반영하고 실제 시스템을 대상으로 조정된 기능 점수를 산정한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.319-322
• /
• 2005

When a concrete structure is subjected to load, its response is both immediate and time dependent. Under sustained load, the deformation of a structure gradually increases with time and eventually may be many time greater than its instantanneous value. The gradual development of strain with time is caused by creep and shrinkage. On this study, to estimate of stress variations on time effects in partially prestressed concrete composite girder bridges, computer program applied Age-adjusted Effective Modulus Method(AEMM) in used.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.4
• /
• pp.1091-1102
• /
• 2003

The Weibull variate is commonly used as a lifetime distribution in reliability applications. Estimation of parameters is revisited in the two-parameter Weibull distribution. The method of product spacings, the method of quantile estimates and the method of least squares are applied to this distribution. A comparative study between a simple minded estimate, the maximum likelihood estimate, the product spacings estimate, the quantile estimate, the least squares estimate, and the adjusted least squares estimate is presented.

• Journal of the Korean Statistical Society
• /
• v.9 no.1
• /
• pp.97-108
• /
• 1980

Variance components model appears often in designing experiments including time series data analysis. This paper is investigating the properties of the various procedures in estimating variance components for the two-way random model without interaction under normality. In this age of computer-oriented computations, MINQUE is found to be quite practicla because of the robustness with respect to the design configurations and parameters. Also adjusted AOV type estimation procedure is found to yield superior results over the unadjusted one.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.361-364
• /
• 2006

It is specified in KCI code that long-tenn deflection shall be determined by multiplying the immediate deflection by KCI code multiplier, unless it is obtained by a more comprehensive analysis. Therefore, in this study, the estimation method of long-term deflection by KCI code multiplier is known resonable by comparing analysis results using KCI code multiplier and AEMM.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.803-806
• /
• 1997

In this paper, a force estimation method is proposed for the sensorless force control. For this, a disturbance observer is applied to each joint of an n degrees of freedom manipulator to obtain a simple equivalent robot dynamics(SERD) being represented as an n independent double integrator system. To estimate the output of disturbance observer in the absence of external force, the observer estimator is designed, where the uncertain parameters of the robot manipulator are adjusted by gradient method to minimize the output between the disturbance observer and the observer estimator. When the external force is exerted, the external force is estimated using the difference between the output of disturbance observer which include the external torque signal and that of observer estimator. And then, a force controller is designed for force feedback control employing the estimated force signal. To verify the effectiveness of the proposed force estimation method, several numerical examples are illustrated for the 2-axis planar type robot manipulator.

• The Korean Journal of Applied Statistics
• /
• v.10 no.2
• /
• pp.367-374
• /
• 1997

In panel surveys it is necessary to manage both sampling frame and sample units across time. When sample is updated according to the change of its frame, it should be incorporated in the estimation procedure. This paper derives the bias of the conventional estimator caused by neglecting the change of sample, and provides a bias-adjusted estimator with its variance.

• Wind and Structures
• /
• v.31 no.1
• /
• pp.1-14
• /
• 2020

This paper presents a method of estimation of fatigue demands on connection bolts of tubular steel wind turbine towers. The presented method relies on numerical simulation of aerodynamic loads and structural behavior of bolted connections modeled using finite element method. Variability of wind parameters is represented by a set of values derived from their probability densities, which are adjusted based on field measurements. Numerically generated stress time-series show agreement with the measurements from strain gauges inside bolts, in terms of power spectra and the resulting damage. Position of each bolt has a determining effect on its fatigue damage. The proposed framework for fatigue life estimation represents the complexities in loading and local behavior of the structure. On the other hand, the developed procedure is computationally efficient since it requires a limited number of simulations for statistically representing the wind variations.

• Knowledge Management Research
• /
• v.11 no.1
• /
• pp.37-50
• /
• 2010

Bioharmaceutical technologies have consistently been areas in which large licensing agreements have been negotiated. However, there are very limited informations in the open literature on how its running royalty rates are determined and no specific methods are yet provided. The purpose of this study is to suggest an appropriate method for the estimation of running royalty of bioharmaceutical technology in licensing agreements. Here distribution of risk-adjusted operating margins are obtained by simulation using statistics of success rates in the stage of clinical trials and profit margins. Three factors based on technology, business and license legal terms are considered and combined as licensing competitiveness level. Finally, reasonable running royalty is estimated by combining simulated distribution and licensing competitiveness level. This suggested method is expected to practically useful for licensor to establish an appropriate running royalty rate for licensing.