• Composites Research
• /
• v.16 no.1
• /
• pp.42-49
• /
• 2003

Brittle matrix composites often have interfacial debonding between the fiber and matrix which may lead to strength and stiffness degradation. The effect of interfacial debonding and fiber volume fraction on the mechanical properties of composite material were studied by using finite element method. Firstly, the modelling of fiber and matrix constituting the composite material was simplified under some assumptions. Traction and displacement continuity conditions were imposed along the boundary of adjacent representative volume elements. In order to obtain the effective material properties of composite material, stiffness constants were inverted. Numerical values of longitudinal moduli in case of perfect bonding were compared with theoretical values obtained by rule of mixtures and yielded consistency. Material properties of composite with large debonding an81e were found to decrease even though the fiber volume fraction increased.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.279-290
• /
• 2010

Technical countermeasures against debris flow should be established upon the risk level of the target location. Risk of debris flow should consider the hazard imposed by debris flow and vulnerability of the facilities to debris flow. In this research, we have defined the target location for risk evaluation and suggested scoring method of hazard of debris flow and vulnerability of road to debris flow. By defining risk rank into 6 categories in terms of possibility of damage during rainfall and using the risk scores of 46 debris flow cases, we have suggested risk ranking matrix. The method can be used in ranking the drainage basin adjacent to road by simply determining the hazard with vulnerability score and can be used for planning the debris flow countermeasures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1747-1750
• /
• 2022

As shrinking the semiconductor process into the deep sub-micron to achieve high-density, low power and high performance integrated circuits, MBU (multiple bit upset) by soft errors is one of the major challenge of on-chip memory systems. To address the MBU, single error correction, double error detection and double adjacent error correction (SEC-DED-DAEC) codes have been recently proposed. But these codes do not resolve mis-correction. We propose the SEC-DED-DAEC-TAED(triple adjacent error detection) code without mis-corrections. The generated H-matrix by the proposed heuristic algorithm to accomplish the proposed code is implemented as hardware and verified. The results show that there is no mis-correction in the proposed codes and the 2-stage pipelined decoder can be employed on-chip memory system.

• Journal of Periodontal and Implant Science
• /
• v.37 no.1
• /
• pp.53-64
• /
• 2007

The aim of this study was to examine the possibility of periodontal ligament regeneration when autotransplantation was used by the periodontal ligament fibroblasts cultured on the acellular dermal matrix in teeth without a periodontal ligament. One minipig was used in this study. The mandibular and maxillary permanent incisors were ex-tracted for the culture of the periodontal ligament cells. The roots of the unextracted teeth were classified into a positive control group, in which the normal periodontal ligament was preserved. The roots of the extracted teeth were divided into the following two groups: The negative control group, in which the periodontal ligament had been removed and the acellular dermal matrix was not applied; and an experimental group, in which the periodontal ligament had been removed and periodontal ligament fibroblast cultured on an acellular dermal matrix was applied. The prepared teeth were transplanted, and completely submerged using physical barrier membranes. The animal was sacrificed 4 weeks after the autotransplant. The transplanted teeth were examined histologically. In this study, the periodontal ligament was normal in the positive control group, and ankylosis was discovered on the denuded root surface in the negative control group. Periodontal ligament-like connective tissue was found adjacent to the denuded root and the new cementum-like layer of hard tissue was formed in the experimental group. These results suggest that the periodontal ligament fibroblasts cultured on the acellular dermal matrix may play a role in regenerating the periodontal ligament-like tissue with new cememtum-like tissue formation.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.582-588
• /
• 1998

The male reproductive system of Macrobrachium nipponense consists of a pair of lobulate testes enveloped within a mesenteric sheath extending the length of the carapace. The paired vasa deferentia originated from the mid-lateral region of each testis and extended to the genital pores at the base of the fifth walking legs. The vas deferens has four morphologically distinct regions, i.e., a short and slender proximal region, a long convoluted region, an elongate distal region and an ejaculatory duct that terminates at the genital pore. The sperm mass produced in the testes is surrounded by a basophilic matrix adjacent to the high columnar epithelium and an eosinophilic matrix adjacent to the simple columnar epithelium. The sperm cord is stored in the ejaculatory duct until it is ejaculated. Androgenic gland is found near the subterminal region of the ejaculatory duct between the muscles of the coxopodite of the last thoracic leg. The cell of the androgenic gland is about 6~8 $\mu$m in length, characterized by with extended chromatin in the large nucleus that stained weakly with hematoxylin and there is a large quantity of cytoplasm. The sperm of M. nipponense are typical of the palaemonid type, having a convex, cup shaped head and an elongated spike extending from the centre of the convex head. The spermatophore consisted of an eosinophilic matrix, a basophilic matrix and paired sperm masses which was surrounded by the basophilic matrix. It generally shows a bilaterally symmetrical structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.604-612
• /
• 1992

OWT is a tool for block transform coding with wavelet basis functions that overlap adjacent blocks. The OWT can reduce the block effect. Without increasing the transmission data in this paper transform matrix of OWT Is presented. Some simulation results show that performances are early same to BCT, but block effect is reduced to very low level.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.101-109
• /
• 2002

In this paper, multiple object tracking system in a known environment is proposed. It extracts moving areas shaped on objects in video sequences and detects racks of moving objects. Color invariant co-occurrence matrices are exploited to extract the plausible object blocks and the correspondences between adjacent video frames. The measures of class separability derived from the features of co-occurrence matrices are used to improve the performance of tracking. The experimented results are presented.

• Structural Engineering and Mechanics
• /
• v.34 no.4
• /
• pp.475-490
• /
• 2010

It is the intention of this study to synthesize the effects of double-edge cracks on the dynamic characteristics of a beam. The stiffness matrix is first determined for a Timoshenko beam containing two same-line edge cracks. The presented model is then developed for elements with two parallel double-sided cracks, considering the interaction between the stress fields of adjacent cracks. Finally, a finite element code is implemented, to examine the influence of depth and location of double cracks, on the natural frequencies of the damaged system.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.746-752
• /
• 2014

In a multi-camera measurement system, the determination of the external parameters is one of the vital tasks, referred to as the calibration of the system. In this paper, a new geometrical calibration method, which is based on the theory of the vanishing line, is proposed. Using a planar target with three equally spaced parallel lines, the normal vector of the target plane can be confirmed easily in every camera coordinate system of the measurement system. By moving the target into more than two different positions, the rotation matrix can be determined from related theory, i.e., the expression of the same vector in different coordinate systems. Moreover, the translation matrix can be derived from the known distance between the adjacent parallel lines. In this paper, the main factors effecting the calibration are analyzed. Simulations show that the proposed method achieves robustness and accuracy. Experimental results show that the calibration can reach 1.25 mm with the range about 0.5m. Furthermore, this calibration method also can be used for auto-calibration of the multi-camera mefasurement system as the feature of parallels exists widely.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3256-3264
• /
• 1996

This paper presents an efficient VLSI architecture for transposing matris in high speed. In the case of transposing N*N matrix, N$^{2}$ numbers of transposition cells are configured as regular and spuare shaped structure, and pipeline structure for operating each transposition cell in paralle. Transposition cell consists of register and input data selector. The characteristic of this architecture is that the data to be transposed are divided into several bundles of bits, then processed serially. Using the serial transposition of divided input data, hardware complexity of transpositioncell can be reduced, and routing between adjacent transposition cells can be simple. the proposed architecture is designed and implemented with 0.5 .mu.m VLSI library. As a result, it shows stable operation in 200 MHz and less hardware complexity than conventional architectures.