• 대한치과의사협회지
• /
• 제50권7호
• /
• pp.394-406
• /
• 2012

Objective: The adhesion capabilities of different types of self-ligating brackets were measured with respect to Streptococcus mutans and Streptococcus sobrinus. Methods: Five types of self-ligating brackets (Clippy-C; Mini Clippy; Clarity-SL; Speed; Damon 3) were used for the experiment group and composite resin brackets (Spirit-MB), metal brackets (Victory) and polycrystalline alumina brackets (Clarity) were used for the control group. In order to assess adhesion of bacteria to the brackets, the brackets were cultured for 3, 6 and 24 hours in media containing bacteria and 20% sucrose. Results: There was no statistic difference in adhesion amount of Streptococcus mutans and Streptococcus sobrinus according to the types of brackets. A total adhesion amount according to bracket type was different. An extended incubation time increased adhesion amount. Observation under scanning electron microscope showed that Streptococcus sobrinus adhered more to Clippy-C and Victory rather than to Clarity-SL. Conclusions: Clarity-SL, a self-ligating esthetic bracket was confirmed to show lower bacterial adhesion to cariogenic bacteria, Streptococcus mutans and Streptococcus sobrinus group than other self-ligating brackets or conventional brackets, which suggests that proper use of self-ligating esthetic brackets might even be better in preventing tooth surface decalcification.

• 농약과학회지
• /
• 제19권3호
• /
• pp.317-322
• /
• 2015

본 연구는 농약 살포량과 유효성분의 부착량 그리고 해충방제 효과와의 상관관계를 조사하여 효율적 해충방제를 위한 적정 농약 살포량을 도출하는 기초 자료를 얻고자 실시되었다. 시험약제의 유효성분인 acetamiprid의 표준검량선의 직선성 $R^2=0.9994$, 회수율 71~93%, 변이계수 6% 이하로 농약 잔류분석기준에 적합하였다. 2015년도 실험에서는 살포량을 전년도보다 70 L 감량한 302 L/10a로하고 살포압을 낮추어 살포한 후 유효성분의 부착량을 비교 분석한 결과, 부착량의 상관계수가 82%에서 69%로 낮게 조사되어 전년도에 비해 고르게 살포되었음 알 수 있었다. 약제 살포량을 줄였음에도 해충에 대한 방제가가 95%이상 우수한 것으로 나타나, 유효성분 부착량의 상관계수와 밀접한 관계가 있는 것으로 보여 진다. 또한 사과원 토양 표면의 유효성분 부착량을 분석한 결과 과수에 부착되는 양과 비교해 2.2배까지 높게 부착되는 것으로 분석되었다.

• 한국의류학회지
• /
• 제34권7호
• /
• pp.1175-1183
• /
• 2010

This study investigates the effect of polarity of oily soil on adhesion of oily and particulate soil to PET fabric in oily/particulate mixed soil systems. The potential energy of interaction between two particles was examined as a fundamental environment of adhesion of soil to fabrics. The ${\zeta}$-potential of ${\alpha}-Fe_2O_3$ particles was measured by a microelectrophoresis method, and the potential energy of interaction between two particles was calculated by using the Verwey-Overbeek theory. The ${\zeta}$-potential of particle and the potential energy of interaction between two particles was slightly influenced by the polarity and type of oily soil, but increased with the increased anionic surfactant concentration and amount of oily soil. The adhesion of oily soil to fabric increased with the additional amount of polarity of oily soil and decreased surfactant concentration that was relatively high at a temperature of $60^{\circ}C$ surfactants solution. The adhesion of ${\alpha}-Fe_2O_3$ particle to PET fabric decreased with an increased amount and polarity of oily soil and increased surfactant concentration Although some similarity exists, the general trend of the adhesion to fabric by particulate soil differ from oily soil.

• 접착 및 계면
• /
• 제11권2호
• /
• pp.63-69
• /
• 2010

본 연구는 2-EHA (2-ethyl hexyl acrylate), 2-EHMA (2-ethyl hexyl methacrylate), 2-HEA (2-Hydroxy ethyl acrylate), acrylic acid 모노머를 이용하여 hydroxy기를 가진 아크릴 수지 점착제를 합성한 후 MOI (Methacryloyloxyethyl isocyanate) 또는 2-isocyanatoethyl methacrylate의 투입량 조절을 통한 경화특성을 향상시킬 수 있는 adduct 반응을 시킨 이소시아네이트 변성 아크릴 수지 점착제를 제조하였다. 시험 결과 초기 점착력과 박리 접착강도는 MOI와 가교제인 isocyanate의 양이 증가할수록 감소하였다. UV 조사후, MOI와 가교제인 isocyanate의 양이 증가할수록 높은 경화특성 때문에 박리접착 강도는 좀 더 낮아지는 결과를 가져왔다.

• 농업과학연구
• /
• 제43권3호
• /
• pp.346-352
• /
• 2016

This study was conducted to obtain the correlation between the plant surface spray adhesion amount of pesticides and the pest control effect. The linearity of the standard curves of dinotefuran and thiodicarb was $R^2=0.9999$, and recovery was between 70% to 120% which was satisfactory for insecticide residue analyses. The pest control effect was evaluated by assessing the number of apple leafminers (Phyllonorycter ringoniella, Gracillariidae, Lepidoptera) captured by sex pheromone traps from late June to late September in 2015. For the adhesion amount, dinotefuran recovered from trap A and B, respectively were $47{\mu}g/50cm^2$ and $23{\mu}g/50cm^2$, which can be characterized as a very low adhesion amount in comparison to the average adhesion amount of $81{\mu}g/50cm^2$ in the field. In case of thiodicarb, $691{\mu}g/50cm^2$ and $71{\mu}g/50cm^2$ were recovered from trap A and B, respectively, and the average amount in the field is $325{\mu}g/50cm^2$. These results showed close correlation with the insect population captured by trap A and B. The numbers of insects captured by trap A and B between the end of July and late August were similar. After spraying thiodicarb on August 28, the number of apple leafminers captured by trap B is bigger than that of trap A. It appears that pest occurrence tended to be high at low adhesion amounts of the active ingredient. Therefore, in order to obtain an optimal control effect, it is suggested that uniform application of insecticides is critical instead of relying on the amount of insecticide applied in the field.

• 한국표면공학회지
• /
• 제26권1호
• /
• pp.11-21
• /
• 1993

The relationship between the amount of deposited-Zn and the adhesion of Zn film has beend investigated. This study changed the mild steel substrate temperature range of $100^{\circ}C$~$250^{\circ}C$, with the aim of studying the adhesion of Zn film coated by PVD on substrates in 10-2~10-3torr and deoxidant gas atmospheres 50%H2~50%N2 and 75%H2+25%N2. The result revealed that the adhesion of Zn film was remarkably good in a 75% H2+25%N2 gas atmosphere as well as deoxidant time was short, and with increasing the substrate tempera-ture up to $250^{\circ}C$. Whiled the amount of deposition tended to increase linearly with time at constant evaporation temperature. It was almost constant when the substrate temperature was lower than $200^{\circ}C$, slightly decreased between $200^{\circ}C$ and $250^{\circ}C$ and significantly decreased at $300^{\circ}C$.

• 한국표면공학회지
• /
• 제50권2호
• /
• pp.72-84
• /
• 2017

In this work, electrophoretic paint (E-paint) was deposited on AZ31 Mg alloy after four different surface pretreatments: knife abrading, SiC paper abrading, deionized (DI) water immersion and NaOH immersion. The deposition process of E-paint was studied by analyses of voltage-time and current-time curves, amount of deposited paint, current efficiency and surface oxide film resistance and the adhesion of E-paint was examined by tape test before and after immersion in DI water for 500 h at $40$^{\circ}C$. It was found that the induction time for the deposition, the amount of deposited paint and the current efficiency are inversely proportional to the resistances of surface films prepared by different surface pretreatment methods. The electrophoretic painting showed longer inductance time, larger amount of deposited paint and higher current efficiency on the highly conducting surfaces, such as knife-abraded and SiC-abraded surfaces than on the less conducting surfaces, such as DI water-immersed and NaOH-immersed samples. Excellent adhesion was observed on the E-paintings deposited onto knife-abraded and SiC-abraded AZ31 Mg alloy samplesSiC-abraded AZ31 Mg alloy samples.

• 한국의류학회지
• /
• 제22권8호
• /
• pp.1132-1140
• /
• 1998

The adhesion and removal of $\alpha$-Fe2O3 particles on the from PET fabric in NPE solution with different ionic strength were discussed in terms of interaction of surface charge of particle and substrate. The adhesion of $\alpha$-Fe2O3 particles to PET fabric and its removal from PET fabric were carried out by using water bath shaker and Terg-O-Tometer under various solution conditions. The ζ potential of PET fiber and $\alpha$-Fe2O3 particles in the detergent solution were measured by steaming potential and microelectrophoresis methods, respectively. The adhesion and removal amount of $\alpha$-Fe2O3 particles on the from PET fabric increased with increasing time of adhesion and removal, and the rates of adhesion and removal were high at the initial stage of adhesion and removal, and then the rates decreased with passing time. The adhesion and removal amount of $\alpha$-Fe2O3 particles on and from PET fabric increased with increasing pH of solution regardless ionic strength. The tendencies and degree of adhesion and removal were very similar regardless interaction of surface charge of particle and fiber. Therefore, in the presence of a surfactant and electrolyte, the influence of interaction of surface charge of particle and substrate on the detergency of particulate soil was small.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.327-333
• /
• 1993

The effect of heat treatment on the adhesion between Cu-18wt% Cr film and polyimide has been studied by using T-peel test, AES, and XRD. Cu-18wt% Cr alloy and pure Cu films were sputter deposited onto pol-yimide. Cu was electroplated before and after heat treatment at $400^{\circ}C$ for 0.5 hr and 2 hrs respectively. The adhesion of metal film onto polyimide was considerably good before heat treatment, but heat treatment re-duced the peel adhesion strength in all specimens. The reduction in adhesion in adhesion strength values in the specimens which were plated after heat treatment was mainly due to Cr-O rich pahse formed in the metal/polyimide in-terface. In the specimens which were heat treated after plating, the enhanced ductility in the metal films con-tributes the peel adhesion strength by increasing the amount of deformation in metal strips.

• 한국표면공학회지
• /
• 제46권1호
• /
• pp.9-15
• /
• 2013

The effect of the additionally applied electrical current on the adhesion strength between electroless Cu and polyimide films was investigated. Peel tests were performed after applying electrical current within the range from 0.1 to 100 mA for the duration from 1 to 30 minutes. Sample with more than 1 mA of additional electrical current for 1 minute showed higher adhesion strength than that without additional electrical current. However, samples with 10 mA of additional electrical current for more than 10 miniutes showed the degradation of adhesion strength. Ra and RMS values of the peeled polyimide surface were proportional to the adhesion strength though there were no significant changes in the morphology of the peeled surfaces with varied amount and time-length of additional electrical current. Applying electrical current could increase the density of chemical bonding, which results in increase of the adhesion strength between copper and polyimide. However, in the case of applying additional electrical current for excessive amount or time, the degradation of the adhesion strength owing to the formation of copper oxide at the interface could occur.