• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.390-393
• /
• 2002

Many researchers have studied for the barrier liner in the landfill that is mixed with clay mineral, native soils and solidified agent. However, they have a littel but problems for safety construction and maintenance as a bottom liner systems in the landfill. In this paper the authors studied the effects on hydraulic conductivity by electric-chemical ion-exchange agent that is a soil stabilization agent(Sulphonated Oil), The application of the soil stabilization agent to meet the hydraulic conductivity of clay liner in landfill is possible if the additive quantity and a proper reaction time is determined relevantly in the laboratory test.

• Journal of the Korean Ceramic Society
• /
• v.17 no.3
• /
• pp.133-140
• /
• 1980

Nonohmic properties of ZnO ceramics with various small amounts of additives were studied in relation to sintering temperature and additive content. The kinds of additives used were basic additives ($Bi_2O_3$, $BaCO_3$, $MnCO_3$, $Cr_2O_3$) and $KNO_3$ Especially this study has focused on the effects of $KNO_3$ in ZnO ceramics with basic additives. SEM studies indicated that microstructures of ZnO, $KNO_3$ and basic additives showed homogenuous grain size in comparison to ZnO and basic additives compounds. The nonohmic exponent ($\alpha$) in ZnO, $KNO_3$ and basic additives component were measured as high as 40.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.35-42
• /
• 1985

$eta$-Sialon powders were prepared by reduction-nitridation from mixture of Wando pyrophyllite and graphite as a reducing agent at 135$0^{\circ}C$ in 80% $N_2$-20% $H_2$ atmosphere. As the reaction products $Si_2ON_2$, $\beta$-$Si_3N_4$ a--$Si_3N_4$ and $\beta$-SiC were observed. Additive agents of MgO, CaO, $Y_2O_3$ were used for promoting the reduction and nitridiation aeaction. The present study was conducted to investigate the effects of silica-carbon ratio ($SiO_2$/C=weight ratio), raction time gas flow rate pellet size and powder packing on synthesis of $\beta$-Sialon from Wando pyropyllite.

• Journal of electromagnetic engineering and science
• /
• v.7 no.4
• /
• pp.201-206
• /
• 2007

When the M-ary signal experiences the Rayleigh fading, the diversity schemes can reduce the effects of fading since the probability that all the signals components will fade simultaneously are reduced considerably. The symbol error probabilities for various M-ary signals, such as MDPSK, MPSK and MQAM, are mathematically derived for the SC-2(Selection Combining 2) demodulation system, whereby the two signals with the two largest amplitudes are coherently combined among the L branches. On the other hand, maximum ratio combining(MRC) requires the individual signals from each path to be time-aligned, cophased, optimally weighted by their own fading amplitude, and then summed. The propagation model used in this paper is the frequency-nonselective slow Rayleigh fading channel corrupted by the Additive White Gaussian Noise(AWGN). The numerical results presented in this paper are expected to provide information for the design of radio system using M-ary modulation method for above mentioned channel environment.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.345-347
• /
• 1995

ZnO varistor with composition of ZnO(90wt%)-$Bi_2O_3$(3wt%)-$Sb_2O_3$(3.61wt%)-$CO_2O_3$(1.16wt%)-NiO (0.88wt%)-$MnO_2$(0.71wt%)-$Cr_2O_3$(0.93wt%) according to $Al_2O_3$ addtive was fabricated by sintering methods. The optimal densification were established for the processing conditions of 8000 rpm 190$^{\circ}C$ spray drying and 1200$^{\circ}C$ 2hrs sintering. Then here investigated how additive compotions and processing variables affected the electrical and the phesical properties of these ZnO varistors.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.145-146
• /
• 2003

질소산화물은 천연가스, 석유, 석탄과 같은 화석연료 연소 시에 배출되는 대표적 오염물질로 산성비를 유발시키며, 오존, PAN, aldehyde와 같은 광화학 산화물을 형성하여 광화학 스모그를 유발한다. 따라서 NOx 제어의 필요성은 더욱 강조되고 있다. NOx 처리 공정 중 대표적인 SNCR(Selective Non-Catalytic Reduction)공정은 N-계열 시약(환원제)을 노내의 온도가 90$0^{\circ}C$에서 110$0^{\circ}C$인 구역으로 주입하여 NOx가 복잡한 단위반응들을 거쳐서 N2와 $H_2O$로 분해되는 저감기술의 하나로서 초기 설치비가 저렴하고 단기간에 쉽게 설치 가능한 기술이지만, 대부분 외국기술의 도입에 의존하고 있는 실정이므로 국내개발을 필요로 한다. (중략)

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.5
• /
• pp.510-513
• /
• 1997

This study examined the effects of ignoring inbreeding depression on (co)variance components for weaning weight through the use of Monte Carlo simulation. Weaning weight is of particular interest as a trait for which additive direct and maternal genetic components exist and there then is the potential for a direct-maternal genetic covariance. Ignoring inbreeding depression in the analytical model (.8 kg reduction of phenotypic value per 1% inbreeding) led to biased estimates of all genetic (co) variance components, all estimates being larger than the true values of the parameters. In particular, a negative bias in the direct-maternal genetic covariance was observed in analyses that ignored inbreeding depression. A small spurious sire-by-year interaction variance was also observed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.48.1-48.1
• /
• 2010

Cu has been used for metallic interconnects in ULSI applications because of its lower resistivity according to the scaling down of semiconductor devices. The resistivity of Cu lines will affect the RC delay and will limit signal propagation in integrated circuits. In this study, we investigated the characteristics of electroplated Cu films according to the variation of concentration of organic additives. The plating electrolyte composed of $CuSO_4{\cdot}5H_2O$, $H_2SO_4$ and HCl, was fixed. The sheet resistance was measured with a four-point probe and the material properties were investigated with XRD (X-ray Diffraction), AFM (Atomic Force Microscope), FE-SEM (Field Emission Scanning Electron Microscope) and XPS (X-ray Photoelectron Spectroscopy). From these experimental results, we found that the organic additives play an important role in formation of Cu film with lower resistivity by EPD.

• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.227-232
• /
• 2016

In this study, the performance of a 32-quadrature amplitude position modulation (QAPM) system is analyzed under a Rician fading channel condition when the maximal ratio combining (MRC) diversity technique is used in the receiver. The fading channel is modeled as a frequency non-selective slow Rician fading channel corrupted by additive white Gaussian noise (AWGN). QAPM is available to improve BER performance without amplifying transmit power, and MRC diversity makes the performance improvement of QAPM system even bigger by intentionally maximizing SNR. Error performances are shown for the 32-QAPM system and a 32-phase silence shift keying (PSSK) system in order to examine the effects of fading severity, for various values of the Rician parameter, K. The dependence of error rates on MRC diversity is also analyzed. The simulation results show that the BER performance of the 32-QAPM system is better than that of the 32-PSSK system under the above mentioned conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.378-381
• /
• 2003

The chemical mechanical polishing (CMP) has been widely accepted for the global planarization of multi-layer structures in semiconductor manufacturing However, cost of ownership (COO) and cost of consumables (COC) were relatively increased because of expensive slurry. In this paper, the effects of different slurry composition on the oxide CMP characteristics were investigated to obtain the higher removal rate and lower non-uniformity. We prepared the various kinds of slurry. In order to save the costs of slurry, the original slurry was diluted by de-ionized water (DIW). And then, alunima abrasives were added in the diluted slurry in order to promote the mechanical force of diluted slurry.