• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.313-316
• /
• 1990

This paper proposes the design of the decentralized adaptive controllers which are an arbitrary interconnection of sub-systems with unknown parameters, nonlinear ities and bounded disturbances. In order to exponentially converge the state and parameter errors, robust decentralized adaptive controllers are developed for stabilization and tracking the parameters. In the simulation studies of the decentralized adaptive control of a two-area interconnected power system, the effectiveness of the proposed adaptive schemes is demonstrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2555-2557
• /
• 2001

The adaptive IIR filters is more effective than adaptive FIR filters which have the same order of IIR filters. But the IIR filters may have stability problems especially when the adaptive algorithm is not converged. In this paper, a stabilizing procedure for adaptive IIR filters is proposed, and computer simulation is performed to show the effectiveness of proposed schemes.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.895-901
• /
• 1986

This paper presents direct adaptive controllers for single-input single-output nonminimum phase systems based on PID structures. Also, characteristics of these schemes are compared, and convergence properties are considered. In these schemes, controller parameters are estimated from the least-square algorithm and some additional auxiliary parameters are obtained from the proposed polynomial identity which is derived from the pole placement equation and the Bezout identity. The effectiveness of these schemes is demonstrated by computer simulation that has been carried out for a very difficult example.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권4호
• /
• pp.703-719
• /
• 2011

In multi-user wireless communication systems, adaptive modulation and scheduling are promising techniques for increasing the system throughput. However, a mass of wireless recourse will be occupied and spectrum efficiency will be decreased to feedback channel quality indication (CQI) of all users in every subcarrier or chunk for adaptive orthogonal frequency division multiplexing (OFDM) systems. Thus numerous limited feedback schemes are proposed to reduce the system overhead. The recently proposed compressive sensing (CS) theory provides a new framework to jointly measure and compress signals that allows less sampling and storage resources than traditional approaches based on Nyquist sampling. In this paper, we proposed two novel CQI feedback schemes based on general CS and subspace CS, respectively, both of which could be used in a wireless OFDM system. The feedback rate with subspace CS is greatly decreased by exploiting the subspace information of the underlying signal. Simulation results show the effectiveness of the proposed methods, with the same feedback rate, the throughputs with subspace CS outperform the discrete cosine transform (DCT) based method which is usually employed, and the throughputs with general CS outperform DCT when the feedback rate is larger than 0.13 bits/subcarrier.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.659-665
• /
• 2010

The finite element method(FEM) is proven to be an effective approximate method of structural analysis if proper element types and meshes are chosen, and recently, the method is often applied to solve complex dynamic and nonlinear problems. A properly chosen element type and mesh yields reliable results for dynamic finite element structural analysis. However, dynamic behavior of a structure may include unpredictably large strains in some parts of the structure, and using the initial mesh throughout the duration of a dynamic analysis may include some elements to go through strains beyond the elements' reliable limits. Thus, the finite element mesh for a dynamic analysis must be dynamically adaptive, and considering the rapid process of analysis in real time, the dynamically adaptive finite element mesh generating schemes must be computationally efficient. In this paper, a computationally efficient dynamically adaptive finite element mesh generation scheme for dynamic analyses of structures is described. The concept of representative strain value is used for error estimates and the refinements of meshes use combinations of the h-method(node movement) and the r-method(element division). The shape coefficient for element mesh is used to correct overly distorted elements. The validity of the scheme is shown through a cantilever beam example under a concentrated load with varying values. The example shows reasonable accuracy and efficient computing time. Furthermore, the study shows the potential for the scheme's effective use in complex structural dynamic problems such as those under seismic or erratic wind loads.

• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.423-432
• /
• 2017

최근 HTTP 적응적 스트리밍 서비스의 표준인 DASH(Dynamic Adaptive Streaming over HTTP)를 기반으로 하는 비디오 스트리밍 서비스의 QoE(Quality of Experience) 향상을 위해 비디오 품질 조절 기법들이 연구되고 있다. 그러나 기존 기법들은 비디오의 VBR(Variable Bitrate) 특성에 대한 고려가 부족하여 불필요한 품질 변화로 인해 QoE가 저하되는 문제를 발생시킨다. 본 논문에서는 세그먼트 특성을 기반으로 품질을 조절하는 SC-DASH(Segment Characteristics-based DASH)를 제안한다. SC-DASH는 다음에 요청할 세그먼트의 크기, 세그먼트 처리량, 그리고 버퍼 점유율을 기반으로 비디오 품질을 조절하여 불필요한 품질 변화가 발생하는 것을 방지한다. 실험 결과를 통해 SC-DASH가 기존 기법보다 불필요한 품질 변화를 감소시킴으로써 QoE를 향상시키는 것을 확인하였다.

• 정보과학회 논문지
• /
• 제42권8호
• /
• pp.1039-1048
• /
• 2015

최근 웹 기반의 적응적 스트리밍 서비스인 DASH (Dynamic Adaptive Streaming over HTTP)가 주목 받고 있다. 그러나 기존 DASH 환경에서 네트워크와 버퍼 기반의 품질 조절 기법은 콘텐츠의 VBR (Variable Bit Rate) 특성을 고려하지 않아 세그먼트 처리량의 변화가 크며 이로 인해 잦은 품질 변화, 영상의 끊김과 같은 사용자 체감품질이 저하되는 문제점을 발생시킨다. 본 논문에서는 DASH 환경에서 사용자 체감품질을 향상시키기 위해 C-DASH (Content Characteristics based Dynamic Adaptive Streaming over HTTP) 기법을 제안한다. C-DASH 기법은 세그먼트의 처리량과 버퍼 상태, 그리고 콘텐츠의 세그먼트 크기를 고려하여 끊김 없고 비디오 품질 변화가 적은 품질 조절을 수행한다. 실험 결과를 통해 제안한 기법이 기존 품질 조절 기법들에 비해 사용자 체감품질을 향상시킴을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.51-52
• /
• 2008

In this paper, we propose two control schemes. The first control scheme is an adaptive passivity-based excitation control which regulates the terminal voltage to its reference. This controller is obtained through two steps: firstly, a simple direct adaptive passivation controller is designed for the power system with parametric uncertainties; then a linear PI controller is applied to converge the terminal voltage to its reference. The second control scheme is a linear governor control which consists of the frequency and the mechanical power. It is shown that the internal dynamics are locally stable with controllable damping. In the end, the boundness of all electrical variables, the frequency, the mechanical power, and the convergence of the terminal voltage to its reference can be achieved by these control schemes.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.32-41
• /
• 1995

In the analysis of metal forming processes by the finite element method, there are many numerical instabilities such as element locking, hourglass mode and shear locking. These instabilities may have a bad effect upon accuracy and convergence. The present work is concerned with improvement of stability and efficiency in two-dimensional rigid-plastic finite element method using various type of elemenmts and numerical intergration schemes. As metal forming examples, upsetting and backward extrusion are taken for comparison among the methods: various element types and numerical integration schemes. Comparison is made in terms of stability and efficiency in element behavior and computational efficiency and a new scheme of adaptive directional reduced integration is introduced. As a result, the finite element computation has been stabilized from the viewpoint of computational time, convergency, and numerical instability.

• 대한수학회보
• /
• 제45권4호
• /
• pp.781-795
• /
• 2008

In this paper, we describe the application procedure of the adaptive mesh refinement (AMR) for the weighted essentially non-oscillatory schemes (WENO), and observe the effects of the derived algorithm when problems have piecewise smooth solutions containing discontinuities. We find numerically that the dissipation of the WENO scheme can be lessened by the implementation of AMR while the accuracy is maintained. We deduce from the experiments that the AMR-implemented WENO scheme captures shocks more efficiently than the WENO method using uniform grids.