• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.283-294
• /
• 2023

APro, developed in KAERI for the process-based total system performance assessment (TSPA) of deep geological disposal systems, performs finite element method (FEM)-based multiphysics analysis. In the FEM-based analysis, the mesh element quality influences the numerical solution accuracy, memory requirement, and computation time. Therefore, an appropriate mesh structure should be constructed before the mesh stability analysis to achieve an accurate and efficient process-based TSPA. A generic reference case of DECOVALEX-2023 Task F, which has been proposed for simulating stationary groundwater flow and time-dependent conservative transport of two tracers, was used in this study for mesh stability analysis. The relative differences in tracer concentration varying mesh structures were determined by comparing with the results for the finest mesh structure. For calculation efficiency, the memory requirements and computation time were compared. Based on the mesh stability analysis, an approach based on adaptive mesh refinement was developed to resolve the error in the early stage of the simulation time-period. It was observed that the relative difference in the tracer concentration significantly decreased with high calculation efficiency.

• 한국콘텐츠학회논문지
• /
• 제16권2호
• /
• pp.310-319
• /
• 2016

본 논문에서는 관심영역 분리에 따른 적응적인 움직임 보정에 기초한 효과적인 프레임 율 증가 기법을 제안한다. 기존에 가장 많이 알려진 방법인 확장 양방향 움직임 추정 방법(EBME)의 단점을 극복하기 위해, 제안된 알고리즘은 상호 보완적인 비대칭 영역에 대해 양방향 움직임 추정을 수행한다. 그런 후에, 블록 단위로 움직임이나 변화가 있는 영역을 관심영역으로 분류하고 관심영역의 블록 특성에 따라 움직임 벡터를 세부적으로 보정한다. 제안하는 알고리즘은 기존의 선형적인 움직임에 기초하는 확장 양방향 움직임 추정보다 특히 폐색영역에 대해 효율적인 움직임 추정을 한다. 다양한 테스트 비디오 시퀀스들에 대하여 실험한 결과에 따르면, 제안한 방식은 기존 EBME 대비 평균 0.59dB의 화질 개선을 달성하였음을 보인다.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.533-541
• /
• 2007

계층적 p-세분화를 위해 Zienkiewicz-Zhu 오차평가법이 약간 수정되었으며, 이 방법의 유효성을 보이기 위해 휨을 받는 개구부를 갖는 Reinssner-Mindlin $C^{\circ}$-평판에 적용하였다. 유한요소해석상의 적응적 체눈을 결정하는 단계는 초수렴 팻취 복구기법에 기초를 둔 사후오차평가자와 연계된 p-세분화에 의해 제안되었다. 요소내의 변위장을 정의하기 위해 적분형 르장드르 고차 형상함수가 사용되는 반면 복구응력을 보간하기 위해 파스칼의 삼각수에 기초를 둔 같은 차수의 고차다항식이 사용되는 이유로 수정 Z/Z 오차평가는 종래의 방법과 다소 차이를 보여준다. 가우스 적분점에서의 응력을 최적화하기 위해 필요한 다항식으로 표현되는 응력함수를 얻기 위해 최소제곱법이 사용되었다. 고정된 요소망에 거의 최적의 형상함수 차수의 분배를 찾기 위한 전략이 논의되었는데, 허용되는 정확도를 얻을 수 있을 때까지 각 요소마다 형상함수의 차수를 불균등하게 증가시키는 방법으로, 소위 최적의 선택적 p-분배를 자동으로 결정하도록 되어있다. 위의 사항들을 L-형 평판 해석에 적용한 결과, 적응적 p-체눈설계 단계가 진행됨에 따라 자유도의 증가에 따라 오차량은 급격히 감소되는 것을 알 수 있었고, 제안된 오차 지시자에 의한 적응적 p-체눈 세분화는 최적 p-분배 진행방향에 근접하는 것을 볼 수 있었다.

• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.137-156
• /
• 2013

In this paper, a meshfree shell adaptive procedure is developed for the applications in the sheet metal forming simulation. The meshfree shell formulation is based on the first-order shear deformable shell theory and utilizes the degenerated continuum and updated Lagrangian approach for the nonlinear analysis. For the sheet metal forming simulation, an h-type adaptivity based on the meshfree background cells is considered and a geometric error indicator is adopted. The enriched nodes in adaptivity are added to the centroids of the adaptive cells and their shape functions are computed using a first-order generalized meshfree (GMF) convex approximation. The GMF convex approximation provides a smooth and non-negative shape function that vanishes at the boundary, thus the enriched nodes have no influence outside the adapted cells and only the shape functions within the adaptive cells need to be re-computed. Based on this concept, a multi-level refinement procedure is developed which does not require the constraint equations to enforce the compatibility. With this approach the adaptive solution maintains the order of meshfree approximation with least computational cost. Two numerical examples are presented to demonstrate the performance of the proposed method in the adaptive shell analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.736-739
• /
• 1995

The meshless adaptive method based on multiple scale analysis is developed to simulate large deformation problems. In the procedure, new particles are simply added to the orginal particle distribution because meshless methods do not require mesh structures in the formulations. The high scale component of the approximated solution detects the localized region where a refinement is needed. The high scale component of the second invariant od Green-Lagrangian strain tensor is suggested as the new high gradient detector for adaptive procedures. The feasibility of the proposed theory is demonstrated by a numerical experiment for the large deformation of hyperelastic materials.

• 한국전산유체공학회지
• /
• 제11권4호
• /
• pp.39-47
• /
• 2006

In this paper, the authors developed a multidimensional interpolation method inside a finite volume cell in the computation of high-order accurate numerical flux such as the fifth order WEND (weighted essentially non-oscillatory) scheme. This numerical method starts from a simple Taylor series expansion in a proper spatial order of accuracy, and the WEND filter is used for the reconstruction of sharp nonlinear waves like shocks in the compressible flow. Two kinds of interpolations are developed: one is for the cell-averaged values of conservative variables divided in one mother cell (Type 1), and the other is for the vertex values in the individual cells (Type 2). The result of the present study can be directly used to the cell refinement as well as the convective flux between finer and coarser cells in the Cartesian adaptive grid system (Type 1) and to the post-processing as well as the viscous flux in the Navier-Stokes equations on any types of structured and unstructured grids (Type 2).

• 한국통신학회논문지
• /
• 제30권10C호
• /
• pp.976-982
• /
• 2005

In this paper, a channel-adaptive beamforming method is proposed for OFDMA (Orthogonal Frequency Division Multilexing Access) systems with smart antenna, in which the size of a cluster is determined adaptively depending on the frequency selectivity of the channel. The proposed method consists of 4 steps: initial channel estimation, refinement of channel estimates, region-splitting, and computation of weight vector for each region. In the proposed method, the size of a cluster for resource unit is determined adaptively according to a region-splitting criterion. It is shown by simulation that the proposed method shows good performances in both frequency-flat and frequency-selective channels.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.87-90
• /
• 1988

This paper reports a simple posteriori error estimate method for adaptive finite element mesh generation using quadratic shape function especially for the magnetic field problems. The elements of quadratic shape function have more precise solution than those of linear shape function. Therefore, the difference of two solutions gives error quantity. The method uses the magnetic flux density error as a basis for refinement. This estimator is tested on two dimensional problem which has singular points. The estimated error is always under estimated but in same order as exact error, and this method is much simpler and more convenient than other methods. The result shows that the adaptive mesh gives even better rate of convergence in global error than the uniform mesh.

• 대한전기학회논문지
• /
• 제37권3호
• /
• pp.141-145
• /
• 1988

This paper reports a new and simple posteriori error estimate method for adaptive finite element mesh genration especially for the magnetic field problems. To estimate local errors, we consider the interelement boundary conditions. Elements which violate much the conditions are considered to have great errors. Magnetic flux density errors are considered as a basis for refinement. This estimator is tested on two dimensional proplems with singular points. The estimated errors are always under estimated but in same order as exact errors, and this algorithm is much simpler and more convenient than other methods. The adaptive mesh gives much better rate of convergence in global errors than the uniform mesh.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1544-1550
• /
• 2014

In this paper, an adaptive optimization strategy utilizing Kriging model and genetic algorithm is proposed for the optimal design of electromagnetic devices. The ordinary Kriging assisted by the spherical covariance model is used to construct surrogate models. In order to improve the computational efficiency, the adaptive uniform sampling strategy is applied to generate sampling points in design space. Through several iterations and gradual refinement process, the global optimal point can be found by genetic algorithm. The proposed algorithm is validated by application to the optimal design of a switched reluctance motor, where the stator pole face and shape of pole shoe attached to the lateral face of the rotor pole are optimized to reduce the torque ripple.