• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.439-446
• /
• 2010

Fracture mechanics is used for the detailed analysis of the failure of high-speed rotating cylindrical vessels. The general procedure for the analysis of fatigue life and failure used in this study is summarized; the initial material properties are also described. The results of the theoretical stress analysis are compared to the observed magnitude of the stress under the operational condition. The fracture-surface configurations observed under both optical and scanning electron microscopes are used to investigate the progress of fatigue crack propagation. Fatigue life estimates obtained by using the Paris model are compared to the actual service life of the high-speed rotating pressure vessel.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.476-486
• /
• 2010

Fishing efficiency of a trawl vessel can be enhanced by increasing the swept area per unit time, which can be attained either by increasing the mouth size of the net, or by increasing the towing speed. To improve fishing and fuel efficiency of trawl vessels targeting fishes of greater mobility, in which the towing speed is more critical in determining fishing efficiency, we conducted a series of model tests to evaluate the performance of the newly-designed nozzle propeller before installing it in a trawl vessel to verify its towing speed and fuel efficiency in the sea. By conducting further model tests in the experimental basin, we redesigned the propeller of stern trawler to improve the resistance and propulsion performance. Through actual fishing operations, we evaluated the improvement in fuel and fishing efficiency by installing the new nozzle propeller. The trawling speed increased by 0.6kts at the same engine power (RPM), while the engine margin increased by more than 20%. The increased towing speed by installing the redesigned propeller is expected to enhance fishing performance through increasing the number of hauling- and casting operations per unit times, while shortening the towing duration. Analysis of the Catch-Per-Unit-Effort (CPUE) data indicated that the mean CPUE of trawl fishery increased from 3.04kg/m in year 2007 to 6.15kg/m in year 2008, confirming enhanced fishing efficiency by adopting the redesigned propeller.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.242-243
• /
• 2023

Different incident angles concerning ocean conditions and weather greatly influence small vessel navigation. Particularly for small vessels, different incident angles result in distinct motion characteristics closely related to stability. Based on actual coastal wave data, this study conducted simulations and experiments to analyze the motion characteristics of small vessels navigating in irregular waves. The analysis revealed that significant motions primarily occurred at lower speeds from the bow sea. In contrast, as the speed increased, the roll motions due to the bow sea decreased, but those due to the stern seas increased. Consequently, adjusting the incident wave angles according to vessel speed can enhance stability and navigational efficiency for small vessels.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.116-122
• /
• 2023

As the number of hydrogen filling stations for hydrogen supply increases with the progress of low-carbon eco-friendly energy policies, the risk of accidents is also increasing. Actual pressure vessels may have defects such as notches, pores, and inclusions that may occur during the manufacturing process. Therefore, it is necessary to evaluate the integrity of pressure vessels in the case where cracks exist in pressure vessels under internal pressure. In this paper, 3D finite element analysis was used to evaluate the structural safety of hydrogen-filled pressure vessels with surface cracks, and the shape of surface cracks was compared with the commonly used semi-elliptical shape. In the future, these results will be used to predict the remaining life of the pressure vessel in consideration of fracture mechanics.

• Journal of Korea Trade
• /
• v.25 no.2
• /
• pp.152-177
• /
• 2021

Purpose - This study analyses the excepted requirement and burden of proof of the carrier due to unseaworthiness through comparison between the marine transport contract and marine insurance contract. Design/methodology - This study uses the legal analytical normative approach. The juridical approach involves reviewing and examining theories, concepts, legal doctrines and legislation that are related to the problems. In this study a literature analysis using academic literature and internet data is conducted. Findings - The burden of proof in case of seaworthiness should be based on presumed fault, not proved fault. The burden of proving unseaworthiness/seaworthiness should shift to the carrier, and should be exercised before seeking the protections of the law or carriage contract. In other words, the insurer cannot escape coverage for unfitness of a vessel which arises while the vessel is at sea, which the assured could not have prevented in the exercise of due diligence. The insurer bears the burden of proving unseaworthiness. The warranty of seaworthiness is implied in hull, but not protection and indemnity policies. The 2015 Act repeals ss. 33(3) and 34 of MIA 1906. Otherwise the provisions of the MIA 1906 remain in force, including the definition of a promissory warranty and the recognition of implied warranties. There is less clarity about the position when the source of the loss occurs before the breach of warranty but the actual loss is suffered after the breach. Nonetheless, by s.10(2) of the 2015 Act the insurer appears not to be liable for any loss occurring after the breach of warranty and before there has been a remedy. Originality/value - When unseaworthiness is identified after the sailing of the vessel, mere acceptance of the ship does not mean the party waives any claims for damages or the right to terminate the contract, provided that failure to comply with the contractual obligations is of critical importance. The burden of proof with regards to loss of damage to a cargo caused by unseaworthiness is regulated by the applicable law. For instance, under the common law, if the cargo claimant alleges that the loss or damage has been caused by unseaworthiness, then he has the burden of proof to establish the followings: (i) that the vessel was unseaworthy at the beginning of the voyage; and that, (ii) that the loss or damage has been caused by such unseaworthiness. In other words, if the warranty of seaworthiness at the inception of the voyage is breached, the breach voids the policy if the ship owner had prior knowledge of the unseaworthy condition. By contrast, knowingly permitting the vessel to break ground in an unseaworthy condition denies liability only for loss or damage proximately caused by the unseaworthiness. Such a breach does not, therefore, void the entire policy, but only serves to exonerate the insurer for loss or damage proximately caused by the unseaworthy condition.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.956-964
• /
• 2017

This study contributes to deepening understand of the characteristics of fishing vessel rolling motions to improve the development of capsizing alarm systems. A time domain rolling motion simulation was performed. In order to verify capsizing alarm systems, it is necessary to carry out experiments assuming a capsizing situation and perform actual fishing vessel measurements, but these tasks are impossible due to the danger of such a situation. However, in many capsizing accidents, a close connection with rolling motion was found. Accordingly, the rolling motion of a fishing boat, which is the core of a fishing vessel capsizing alarm system, has been accurately measured and a time domain based on a rolling motion simulation has been performed. This information was used to verify the algorithm for a capsizing alarm system. Firstly, the characteristics of rolling motion were measured through a motion experiment. For small vessels such as fishing vessels, it was difficult to interpret viscosity due to analytical methods including CFD and potential codes. Therefore, an experiment was carried out focusing on rolling motion and a rolling mode RAO was derived.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.180-181
• /
• 2010

An estimation algorithm of collision risk among multiple ships has been developed in order to reduce human error and prevent collision accidents. The algorithm is designed to calculate the collision risk among ships based on Fuzzy theory by using AIS data as traffic information. In this paper, to validate the algorithm, the AIS data of actual collision accident, which occurred between a product carrier and a cargo carrier in Busan harbor in 2009 are collected. The replay simulation is carried out on the actual AIS data and the collision risk is calculated in real time. In this paper, the features of the estimation algorithm of collision risk and the results of replay simulation based on AIS data of actual collision accident are discussed.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.291-308
• /
• 2009

The implied obligation under the contract of affreightment not to carry dangerous goods without prior notice to the carrier applies to the contractual relationship between the charterer and the owner under charterparties. The charterers will be in breach of an implied undertaking under the common law if they load dangerous cargoes without making notice of dangerous nature of them to the owner. It is indicated to be necessary to change the term "shipper" to "charterer", with relation to such implied obligation, where the Hague/Hague-Visby Rules are incorporated into the charter, however, it is not so apparent where an actual shipper is involved. So long as an actual shipper could be identified, the shipper rather than the charterer shall be responsible for damages arising from the dangerous nature of the cargo itself. In this case, the actual shipper is interpreted to have an implied contractual relationship with the carrier just by the act of delivering the cargo to the carrier for loading. If the vessel were damaged by shipment of the dangerous cargo under charterparty, the carrier can claim against such damages based on the contractual obligations under charterparties: "implied and expressed duty not to ship dangerous cargo without notice to the carrier"; "Art.IV.6 of the Hague/Hague-Visby Rules"; "Indemnity Clause" and "Redelivery Clause". The carrier has the conventional right under the Hague/Hague-Visby Rules to land, destroy or render the goods innocuous where the dangerous cargo threatens the means of transport or other interests on board. When the carrier has not consented to make the shipment, the carrier's disposal right could be exercised without limitation. However, where the carrier has consented to make the shipment of the dangerous goods with the knowledge concerned, the right of disposal of such goods should be exercised with limitation.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.727-733
• /
• 2010

An estimation algorithm of collision risk among multiple ships has been developed in order to reduce human error and prevent collision accidents. The algorithm is designed to calculate the collision risk among ships based on Fuzzy theory by using AIS data as traffic information. In this paper, to validate the algorithm, the AIS data of actual collision accident, which occurred between a product carrier and a cargo carrier in Busan harbor in 2009 are collected. The replay simulation is carried out on the actual AIS data and the collision risk is calculated in real time. In this paper, the features of the estimation algorithm of collision risk and the results of replay simulation based on AIS data of actual collision accident are discussed.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.777-782
• /
• 1995

The scale up production test for the hydrothermal synthesis of clay mineral from the anorthite, which is distributed in San Chung-District of Korea and called as the ground rock for halloysite-kaolin, has been investigated by using the gaitator type reactor. The automatic control system has been developed and applied for the more effective producibility and the reduction in the defect of this intermittent batch processing property, and finally for the feasibility of this system in actual use. It was observed that this agitator type reactor can reduce the synthesis reaction tme from 5 days to 3 days, only with the condition of 20rpm. The automatic control system could regulate the vessel temperature and pressure precisely at an optimum condition during the treatment. Therefore, from these test results the application-possibility for this system was found to be feasible in actual use.