• Journal of the Korean Society of Food Culture
• /
• v.11 no.2
• /
• pp.235-242
• /
• 1996

Sanitary management practices from 8 packaged meals (Dosirak) manufacturing establishments were surveyd during production and distribution and their microbiological quality of dosirak items marketed in CVS were analyzed. Correlation coefficients were calculated to deternine significant relationships between sanitary management practices and microbiological quality of packaged meals. The results of self evaluation on sanitary management practices indicated 'doing practice well' in personnel and equipment sanitation management but time-temperature control management were practiced satisfactorily only about 55% as compared with the managerial standard guidelines. Significant relationships between the status of actual sanitary management practices and microbiological quality of Dosirak items were not found, but general status of microbiological quality of Dosirak items revealed positive relationship with the size of operational structure and the status of time-temperature control management practices.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2306-2313
• /
• 2010

This paper describes a model based fault detection algorithm for an Advanced ESC System which consists of Hydraulic Control Unit (HCU) with built-in wheel pressure sensors. Advanced ESC System can be used for various value-added functions such as Stop & Go Function and Regenerative Brake Function. Therefore, HCU must have a reliable fault detection. Due to the huge amount of sensor signals, existing specific sensor based fault detection of HCU cannot guarantee the safety of vehicle. However, proposed algorithm dose not require the sensors. When model based fault detection algorithm detects severe failures of the HCU, it warns the driver in advance to prevent accidents due to the failures. For this purpose, a mathematical model is developed and validated in comparison to actual data. Simulation results and data acquired from an actual system are compared with each other to obtain the information needed for the fault detection process.

• Korean Management Science Review
• /
• v.21 no.3
• /
• pp.115-127
• /
• 2004

In this paper, we describe an intelligent monitoring and control system for pick-up/delivery service. This system applies geographical information system(GIS), global positioning system(GPS) and wireless communication technologies for managing pick-up/delivery operations more effectively. It consists of three subsystems, pick-up/delivery sequence planning system, pick-up/delivery monitoring system, and PDA execution system. Pick-up/delivery sequence planning system generates routes and schedules for pick-up/delivery using GIS and optimization techniques. Pick-up/delivery monitoring system monitors current positions of vehicles and actual pick-up/delivery results as compared with planned routes and visit times, while PDA execution system transmits information for vehicles positions and actual pick-up/delivery results using GPS and wireless communication technologies. The intelligent monitoring and control system is currently being used for the pick-up parcel service in a local post office of Korea Post.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.05a
• /
• pp.75-89
• /
• 1996

Factory style plant production system be aimed to produce standardized horticultural products with high quality and clean due to optimization of environment and the improvement of working efficiency, through overcome non-efficiency of production structure in conventional cultivation method. The suggest about actual techniques and development strategies of plant factory in Korea are as follows. (omitted)

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.310-314
• /
• 2008

This paper proposes a very novel method which makes it possible that state feedback controller can be designed for unknown dynamic system with measurable states. This novel method uses the support vector machines (SVM) with its function approximation property. It works together with RLS (Recursive least-squares) algorithm. The RLS algorithm is used for the identification of input-output relationship. A virtual state space representation is derived from the relationship and the SVM makes the relationship between actual states and virtual states. A state feedback controller can be designed based on the virtual system and the SVM makes the controller with actual states. The results of this paper can give many opportunities that the state feedback control can be applied for unknown dynamic systems.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.621-623
• /
• 2000

In this paper, the effective design method of the predictive controller using fuzzy neural networks(FNNs) is presented for the Intelligent control of chaotic nonlinear systems. In our design method of controller, predictor parameters are tuned by the error value between the actual output of a chaotic nonlinear system and that of a fuzzy neural network model. And the parameters of predictive controller using fuzzy neural network are tuned by the gradient descent method which uses control error value between the actual output of a chaotic nonlinear system and the reference signal. In order to evaluate the performance of our controller, it is applied to the Duffing system which are the representative continuous-time chaotic nonlinear systems and the Henon system which are representative discrete-time chaotic nonlinear systems.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.197-204
• /
• 2002

DRAM, SRAM, and FLASH memory are three major memory devices currently used in most electronic applications. But, they have very distinct attributes, therefore, each memory could be used only for limited applications. MRAM (Magneto-resistive Random Access Memory) is a promising candidate for a universal memory that meets all application needs with non-volatile, fast operational speed, and low power consumption. The simplest architecture of MRAM cell is a series of MTJ (Magnetic Tunnel Junction) as a data storage part and MOS transistor as a data selection part. To be a commercially competitive memory device, scalability is an important factor as well. This paper is testing the actual electrical parameters and the scaling factors to limit MRAM technology in the semiconductor based memory device by an actual integration of MRAM core cell. Electrical tuning of MOS/MTJ, and control of resistance are important factors for data sensing, and control of magnetic switching for data writing.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.6
• /
• pp.9-13
• /
• 1975

Employing indefinite admittance matrix analysis method, a novel synthesis procedure of general active-RC filters using 2 operational amplifiers has been shown in this paper. With this procedure, a stable active-RC bandpass filter hart been designed, which provides for independent adjustment of the uning and band-width control. The predicted and actual performance is in good agreement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.895-898
• /
• 2003

The higher precision is demanded in modem manufacturing and it requires the more accurate servo controller. Cross-coupling control (CCC) has been developed to improve contouring motion. In this paper we introduce a new nonlinear CCC that is based on contour-error-vector using a parametric curve interpolator. A vector from the actual tool position to the nearest point on the desire path is directly adopted. The contour-error-vector is determined by constructing a tangential vector of nearest point on desired curve and determining the vector perpendicular to this tangential vector from the actual tool position. Moreover, the vector CCC can apply directly and easily to free-form curves include convex and concave form. The experimental results on a three-axis CNC machine center show that the present approach significantly improves motion accuracy in multi-axis motion

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.876-882
• /
• 1999

It is difficult to determine the feeding rate of coagulant in the water treatment process, due to nonlinearity, multivariables and slow response characteristics, etc. To deal with this difficulty, the genetic-fuzzy system was used in determining the feeding rate of the coagulant. The genetic algorithms are excellently robust in complex optimization problems. Since it uses randomized operators and searches for the best chromosome without auxiliary informations from a population consists of codings of parameter set. To apply this algorithms, we made the lookup table and membership function from the actual operation data of the water treatment process. We determined optimum dosages of coagulant(LAS) by the fuzzy operation, and compared it with the feeding rate of the actual operation data.