• Title/Summary/Keyword: actual amount

Search Result 1,220, Processing Time 0.037 seconds

Comparison of Measured and Predicted Photovoltaic Electricity Generation and Input Options of Various Softwares (태양광 발전량 예측 도구별 입력 요소 분석 및 실제 발전량 비교에 관한 연구)

  • No, Sang-Tae
    • KIEAE Journal
    • /
    • v.14 no.6
    • /
    • pp.87-92
    • /
    • 2014
  • The objectives of this study are to investigate input variables of photovoltaic generation programs and to compare their prediction to actual generation of photovoltaic system in the C city hall and the C city sewage treatment plant. We investigated the actual amount of generation, the forecast amount of generation, the amount of solar radiation data, and calculated the relative errors. We simulated the photovoltaic system of C city hall and the C city sewage treatment plant located in Chungju using existing programs, such as SAM, RETSCREEN, HOMER, PV SYST, Solar Pro. The result of this study are as follows : Through examining the relative errors of monthly predicted and actual generation data, monthly generation data showed big errors in winter season?. Except winter season, actual amount of generation and the predicted amount of generation showed no large errors.

Case Study : Assessment of Small Hydropower Potential Using Runoff Measurements (관측 유량 자료를 이용한 소수력 잠재량 평가에 대한 사례연구)

  • Jung, Sung-Eun;Kim, Jin-Young;Kang, Yong-Heack;Kim, Hung-Su
    • Journal of the Korean Solar Energy Society
    • /
    • v.38 no.4
    • /
    • pp.43-54
    • /
    • 2018
  • In this study, we assessed dependency of small hydropower potentials on the two different runoff such as the estimated runoff based on the rainfall amounts and measured runoff. The hydpropower potentials were evaluated using actural power generations taken from Deoksong, Hanseok, and Socheon small hydropower plants over Han and Nakdong river basins, respectively. As a result of comparing the actual power generation amount with the potential amount based on the rainfall amount and the estimated amount based on the observed flow amount by each small hydroelectric power plant, the degree of latent small hydro energy by the observed flow was confirmed to be high. It is confirmed that the potential hydroelectric power generation rate is estimated to be about average 30%Point higher than the actual generation amount as a result of the measured flow rate rather than using the rainfall amount. Based on this, a method for improving the degree of the actual generation amount is proposed.

A Study on the Amount of Formaldehyde and the Consumer's Recognizability -On the Basis of Disposable Napkins- (Formaldehyde 함량 및 인기도에 관한 연구 -여성용 생리대를 중심으로-)

  • 남상우
    • Journal of the Korean Home Economics Association
    • /
    • v.26 no.2
    • /
    • pp.15-27
    • /
    • 1988
  • This study was designed to measure the amount of formaldehyde in the disposable napkins of eighteen (18) different products. It was aimed to investigate the actual situation of the napkin consumption and to relate it to the amount of formaldehyde measured. The degree of recognizability on the harmfulness of formaldehyde was also studied. The amount of formaldehyde was measured by means of the Acetyl Acetone method. The actual situation of consumption and the recognizability of the formaldehyde were investigated by questionnaire. in the survey, the subjects was 12~53 years old and lived in Seoul Kyoungki-city. The statistical methods used were simple frequency and chi-square. The results obtained from this study were as follows; 1) Among eighteen (18) different disposable napkins, all was found to have less amount of formaldehyde than the japanese regulation. 2) From the survey on the actual situation of consumption, most resondents (66.1%) experienced the dermaptological problem after using the disposable napkins. 3) The recognizability of formaldehede was very low. The recognizability on the harmfulness of formaldehyde was low too, which represented the consumers had least or no knowledge about the formaldehyde release problem.

  • PDF

Estimating Demand Functions of Tractor, Combine and Rice Transplanter (트랙터, 콤바인, 이앙기의 수요 함수 추정)

  • Kim K.;Park C.K.;Kim K.U.;Kim B.G.
    • Journal of Biosystems Engineering
    • /
    • v.31 no.3 s.116
    • /
    • pp.194-202
    • /
    • 2006
  • Using a multi-variable linear regression technique and SUR(seemingly unrelated regression) model, the demand functions of tractor, combine and rice transplanter were estimated. The demand was regarded as an annual supply of each machine and modeled as a function of 11 independent variables which reflect the actual farmer's income, actual prices of farm machines, previous supply, previous stock, actual amount of available subsidy, actual amount of available loan, arable land, import of farm machines and rice price. The actual amount of available loan affects most significantly the demand functions. The actual farmer's income, actual farmer's asset, loan coverage, and rice price affect the demand positively while prices of farm machines and import negatively. The annual demands of tractor, combine and rice transplanter estimated using the demand functions were also presented over the next 4 years.

Comparison between Labor Inputs by Quantity per Unit Method and by Actual Data Method in the Apartment Housing Construction Work - Focusing on Masonry Plaster Waterproofing Tile Labors - (공동주택 건설공사의 표준품셈과 실투입 노무량 비교 분석 - 미장, 방수, 조적, 타일공사를 중심으로 -)

  • Jeon, SangHoon;Koo, Kyo-Jin
    • Korean Journal of Construction Engineering and Management
    • /
    • v.16 no.1
    • /
    • pp.110-118
    • /
    • 2015
  • The standard production unit system is the most basic element in our country construction. However, this standard production unit system shows a large difference in the actual amount of labor input for works at the Apartment housing construction, Therefore, it may be a reasonable alternative to estimate the cost of construction by historical cost data, works will be calculated the cost of labor must determine the exact amount and It is necessary to determine the exact amount of labor input for the construction progress management. This study examines the results of comparing the standard production unit system and the actual amount of labor counting in apartment housing construction was completed in the metropolitan area since 2000, the following results were obtained. the actual amount of labor input are looked for 1.184person/1000 of masonary, $0.084persons/m^2$ of plaster, $0.039persons/m^2$ of Waterproofing, $0.059persons/m^2$ of tile at the Apartment housing construction. in the actual amount of labor counting Compared with standard production unit system, masonry ratio of 59.8%, plaster ratio of 41.3%, waterproofing ratio of 31.5%, tile ratio of 34.3% and The labor rate in the works was the lowest in the plaster. was relatively high in the masonary. Therefore, the amount of labor country apartment housing construction is preferably calculated on historical cost data. But it seems that the amount of labor necessary complement ongoing close enough to the actual standard production unit system a major variable in construction management.

Digital Pen System for Inputting the Actual Amount of Labor Input at Construction Site (건설현장의 실투입 노무량 입력을 위한 디지털펜 시스템)

  • Kim, Daewon;Kim, Tae-Yong;Shin, Yoonseok;Kim, Gwang-Hee
    • Journal of the Korea Institute of Building Construction
    • /
    • v.16 no.2
    • /
    • pp.133-140
    • /
    • 2016
  • The amount of labor input in a construction project is used as source data to estimate construction cost and to understand the productivity of the construction industry. However, there is a significant difference between the standard of estimation and the actual amount of labor input, and a plan is needed to resolve this problem. For this reason, to establish a system with which the actual amount of labor input can be inputted in a more accurate and simpler manner, a new method is proposed in this study. In the new method, a digital pen is used to minimize the difference from traditional handwriting on paper using a pen, and eliminate the redundant input of information. This study is expected not only to reduce the actual amount of labor input but also to contribute to the productivity of construction cost estimate through the sharing or utilization of the information on the web.

Current Composition Table of Foods in Japan and Future Trends

  • Watanabe, Tomoko
    • Journal of Community Nutrition
    • /
    • v.5 no.2
    • /
    • pp.65-71
    • /
    • 2003
  • In Current Standard Tables of Food Composition in Japan (Fifth Revised Edition), standard composition values of food used regularly in Japan are shown by values per 100g of their edible portion, with one value of standard composition per one foodstuff as a rule. In the Explanation (Chapter 1) and Reference Data (Chapter 4) of the original table, the most important matters are mentioned, including the table of the weight change rate by cooking, the table of the outline of the cookery, and the formula of the actual amount of intake nutrition. These are helpful for an understanding of the actual amount of intake nutrition. The formula for the amount of purchase in consideration of the amount of refuse is also shown. Information concerning foodstuffs and composition items in the table as well as important points in the reference column are concurrently written in English. As related studies, the composition tables by values per 100m1 or considered loss, the table or the formula for estimation of the amount of sucrose, and the list of the composition extant rate after cooking, among others, are also provided. Users should understand the original composition table, and then suggest how to utilize it. (J Community Nutrition 5(2) : 65∼71, 2003)

Studies on Motor Activity Log-28 and Actual Amount of Use Test, Actual Amount of Use Test Inter-rater Reliability in Healthy Individuals: Age Dependence and Handedness (연령과 손잡이에 따른 정상인들의 Motor Activity Log-28과 Actual Amount of Use Test 연구 및 Actual Amount of Use Test의 평가자간 신뢰도연구)

  • Kim, Kyeong-hyeon;Shin, Yu-mi;Lim, Mi-yu;Jung, Yu-chang;Oh, Ji-eun;Kim, Su-jin
    • Physical Therapy Korea
    • /
    • v.26 no.2
    • /
    • pp.24-33
    • /
    • 2019
  • Background: Spontaneous use of the upper extremities on the affected side of patients with stroke is a meaningful indicator of recovery and may vary by the age or dominant hand of patients. No prior study has reported changes in actual amount of use test (AAUT) and motor activity log (MAL)-28 according to age and handedness in healthy adults, and AAUT inter-rater reliability for assessment of healthy adults. Objects: This study aimed to (1) research the differences in AAUT and MAL-28 according to age and handedness in healthy adults, and (2) determine the inter-rater reliability of the AAUT. Methods: Seventy healthy adults participated in this study. The MAL-28 was assessed by dividing 61 subjects into young right-handed ($n_1=20$), young left-handed ($n_2=21$), and older right-handed ($n_3=20$) groups. The AAUT was assessed by dividing 63 subjects into young right-handed ($n_1=25$), young left-handed ($n_2=18$), and older right-handed ($n_3=20$) groups. Student's t-test and the Wilcoxon signedrank test were used for statistical analysis. Results: The Amount of Use (AOU) scale values for each group showed no significant differences between age groups and handedness groups in the MAL-28 (p>.05). The AAUT AOU scale value showed significant differences regarding dominant handedness in the AAUT (p<.05), but no significant differences according to age (p>.05). (2) Inter-rater reliability of the AAUT was excellent, except few items (item 9, 11, and 12). Conclusion: Although both the MAL-28 and the AAUT measured how much participants used their dominant arms in healthy subjects, the AAUT only showed significantly higher dominant arm use in left hander than the right hander. In addition, the inter-rater reliability of the AAUT was excellent. Current results can be utilized as a basic information when clinicians develop rehabilitation strategies, and AAUT was shown to be a reliable evaluation tool for measurement of upper extremity use in Korean adults, based on the reliability demonstrated by this study.

Analysis of Road Snow-removal Infrastructure using Road Snow-removal Historical Data (도로제설 이력자료 기반 제설 인프라 분석)

  • Kim, Jin Guk;Kim, Seoung Bum;Yang, Choong Heon
    • International Journal of Highway Engineering
    • /
    • v.19 no.3
    • /
    • pp.83-90
    • /
    • 2017
  • PURPOSES : In this study, systematic road snow-removal capabilities were estimated based on previous historical data for road-snowremoval works. The final results can be used to aid decision-making strategies for cost-effective snow-removal works by regional offices. METHODS : First, road snow-removal historical data from the road snow-removal management system (RSMS), operated by the Ministry of Land, Infrastructure and Transport, were employed to determine specific characteristics of the snow-removal capabilities by region. The actual owned amount and actual used amount of infrastructure were analyzed for the past three years. Second, the regional offices were classified using K-means clustering into groups "close" to one another. Actual used snow-removal infrastructure was determined from the number of snow-removal working days. Finally, the correlation between the de-icing materials used and infrastructure was analyzed. Significant differences were found among the amounts of used infrastructure depending on snowfall intensity for each regional office during the past three years. RESULTS:The results showed that the amount of snow-removal infrastructure used for low heavy-snowfall intensity did not appear to depend on the amount of heavy snowfall, and therefore, high variation is observed in each area. CONCLUSIONS:This implies that the final analysis results will be useful when making decisions on snow-removal works.

The Performance & Operation Analysis of a Steam Reformer for MCFC (MCFC용 Steam Reformer 개질성능 분석 및 운전평가)

  • Seo, Hai-Kung;Koh, Joon-Ho;Lim, Hee-Chun
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.11 no.4
    • /
    • pp.149-159
    • /
    • 2000
  • This paper is concerned with the performence of a steam reformer for 25kW class MCFC, which is compared with the theoretically calculated results at various operating conditions. The theoretical $H_2$ production amount and $CH_4$ conversion rate are calculated with variations of temperature and steam/carbon (S/C) ratio using fortran program, and the actual values are measured from flowmeter and gas chromatography. As a result of the comparison of theoretical and actual values, the theoretical $H_2$ production amount is calculated by $24.4m^3/hr$ at the normal operating condition(LNG $9m^3/hr$, S/C ratio 5, absolute pressure $2.77kg/cm^2$, $610^{\circ}C$), but the actual production amount is only $19.4m^3/hr$, which is 79.5% of the theoretical value. Nevertheless, at the normal operating condition, the reformer for 25kW class MCFC performed well for a 2,100 hr long run operation, constantly producing $H_2$.

  • PDF