• 제목/요약/키워드: active suspension

검색결과 398건 처리시간 0.024초

반능동 서스펜션용 MR CDC 댐퍼의 자기회로 설계기법 (Magnetic Circuit Design Methodology of MR CDC Dampers for Semi-Active Suspensions)

  • 박재우;정영대
    • 한국정밀공학회지
    • /
    • 제25권10호
    • /
    • pp.48-57
    • /
    • 2008
  • MR Fluid, one of functional fluids, is developed for the application to automobile products. MR CDC damper using MR fluid has following principles. When ar electric current is applied to the solenoid, apparent viscosity of MR fluid passing through the annular gap which acts as magnetic circuits varies directly as the intensity of the current. These devices have a simple structure and excellent lime response characteristics, emerging as the alternatives of the conventional semi-active suspension systems. In this study, a design procedure of the magnetic circuit through the solenoid fore and the flux ring functioning as a magnetic path is investigated so as to optimize the design and performance of MR CDC dampers for the vehicles. In addition, an operating point on the B-H curve, the magnetization according to the variation in the annular gap, the pole piece width and the density of MR fluid are studied to design the optimal piston head within the restrained dimension range.

Characterization of Antibiotic Substance Produced by Serratia plymuthica A21-4 and the Biological Control Activity against Pepper Phytophthora Blight

  • Shen, Shun-Shan;Piao, Feng-Zhi;Lee, Byong-Won;Park, Chang-Seuk
    • The Plant Pathology Journal
    • /
    • 제23권3호
    • /
    • pp.180-186
    • /
    • 2007
  • The biocontrol agent, Serratia plymuthica A21-4, has been developed for controlling pepper Phytophthora blight. Serratia plymuthica A21-4 strongly inhibits the mycelial growth, zoospore formation, and cyst germination of Phytophthora capsici in vitro. The application of a cell suspension of strain A21-4 to pepper plants in pot experiments and in greenhouse successfully controlled the disease. The bacteria produced a potent antifungal substance which was a key factor in the suppression of Phytophthora capsici. The most active chemical com-pound was isolated and purified by antifungal activity-guided fractionation. The chemical structure was identified as a chlorinated macrolide $(C_{23}H_{31}O_8Cl)$ by spectroscopic (UV, IR, MS, and NMR) data, and was named macrocyclic lactone A21-4. The active compound significantly inhibited the formation of zoosporangia and zoospore and germination of cyst of P. capsici at concentrations lower than $0.0625{\mu}g/ml$. The effective concentrations of the macrocyclic lactone A21-4 for $ED_{50}$ of mycelial growth inhibition were $0.25{\mu}g/ml,\;0.25{\mu}g/ml,\;0.30{\mu}g/ml \;and\;0.75{\mu}g/ml$ against P. capsici, Pythium ultimum, Sclerotinia sclerotiorum and Botrytis cinerea, respectively.

올리고머형 음이온성계면활성제 수용액에서 안료의 분산안정성(제 3보);형광성이 큰 올리고머 계면활성제의 합성 및 그의 계면성 (Suspension Stability of Pigments in Aqueous Solution of Anionic Oligo-Type Surfactants(part 3);Synthesis of Anionic Oligo Surfactant having Fluorescent Intensity and Their Properties)

  • 이향우;이진희;주명종;남기대
    • 한국응용과학기술학회지
    • /
    • 제14권1호
    • /
    • pp.109-115
    • /
    • 1997
  • Fluorescent anionic oligo surfactants were synthesized by the condensing products of long chain alkylvinylether-maleic anhydride cooligomers and resorcinol including dye structures. Their various surface activities and dispersing action were studied on the aqueous solution. These oligo surfactants exhibited a remarkable surface tension lowering property, lower foaming and a large dispersing action for the particles of ${\alpha}-copper$ phthalocyanine blue. Further it was ascertained that the binding of oligo surfactant onto the pigment surface caused the deviation towards lower wavelengths at the maximum fluorescent intensity as compared with aqueous oligo surfactant solutions, These surface active properties of the oligo surfactants may be attributed to rigid and hydrophobic structure of dye groups, besides surface-active groups of alkylether groups and carboxylic group of the anionic oligo surfactants.

여우주머니(Phyllanthus ussuriensis) 추출물의 B헝 간염바이러스 증식 억제 (Inhibition of HBV ]Replication by the Extract of Phyllanthus ussuriensis)

  • 김철영;김정민;김태균;김승희;허훈
    • Biomolecules & Therapeutics
    • /
    • 제6권2호
    • /
    • pp.139-144
    • /
    • 1998
  • Abstract -Phyllanthus ussuriensis which belongs to Euphorbiaceae has been used as a component of Korean traditional remedy against hepatitis and jaundice. Aqueous methanolic extract of P. ussuriensis was tested for antiviral activity of hepatitis B virus (HBV) in HepG2 2.2.15 cells which were derived through transfection of cloned HBV DNA into HepG2 human hrpatoblastoma cells. P. ussuriensis extract decreased the levels of extracellular HBV virion DNA and inhibited HBV replication at concentrations ranging from 50 to 500$\mu$g/ml. Partitioning of water suspension of the extract revealed that the activity mainly resides in the EtOAc fraction. Consecutive purification of the EtOAc fraction by silica-gel column chromatography resulted in the two active anti-HBV fractions. Southern blot analysis shows that the action mechanisms or active site of the two fractions seems to be different in terms of their inhibition of HBV replication steps.

  • PDF

회전형 MR 댐퍼를 이용한 반능동 현가장치의 퍼지 스카이-훅 제어 (Fuzzy Sky-hook Control of Semi-active Suspension System Using Rotary MR Damper)

  • 조정목;조중선
    • 한국지능시스템학회논문지
    • /
    • 제17권5호
    • /
    • pp.701-706
    • /
    • 2007
  • 최근 고층건물의 방진시스템 및 자동차의 현가장치 분야에 MR 유체를 이용한 반능동 진동제어에 관한 연구가 활발히 진행되면서 MR 유체의 밸브모드 특성을 이용한 선형 MR 댐퍼가 널리 사용되고 있다. 그러나 전단모드를 이용한 회전형 MR 댐퍼에 관한 연구는 초기단계에 머물고 있다. 본 연구에서는, 주행로봇의 무한회전형 액츄에이터용 회전형 댐퍼의 진동제어에 관한 연구를 수행하였으며, 퍼지 로직을 기반으로 한 회전형 MR 댐퍼용 진동제어 알고리즘을 제안하였다. 퍼지제어기의 입출력 이득과 멤버쉽 함수의 모양은 유전자 알고리즘을 이용하여 조정하였다. 시뮬레이션 결과는 MR 댐퍼에 충격력이 가해질 때 퍼지 스카이-훅 제어의 제어성능을 보여준다.

알로에 배라 점질물의 무기물 응집활성 (Flocculating Activity of the Mucilage Extracted from Aloe vera Linne)

  • 이신영;민병주;강태수
    • KSBB Journal
    • /
    • 제13권5호
    • /
    • pp.540-546
    • /
    • 1998
  • For the purpose of screening the functionality in aloe, the mucilage from Aloe vera Linne was prepared by extraction of mucilaginous parenchyma with ethanol followed homogenation, filtration and centrifigation. Flocculability of this mucilage from Aloe vera L. was investigated and the identification fro flocculating active materials were carried out. The mucilage exhibited an excellent flocculability for 1% bentonite and 5,000 ppm kaolin suspensions. The good correlations between mucilage volume(concentration) and flocculability for 1% bentonite suspension were obtained. The flocculated volume or flocculation rate was affected depending upon the degrees of processing such as a heat treatment and purification. A major component showing the flocculaing activity was considered as a highly polymerized polysaccharide having flocculating activity was about 1,000,000 daltons.

  • PDF

ER 댐퍼의 밸브 형상에 따른 감쇠 특성의 해석 및 실험 (An Analysis and Test Results of Damping Characteristics of ER Dampers with Two Different Valve Types)

  • 장보영;이종민;김창호;박영필
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
    • /
    • pp.608-613
    • /
    • 1998
  • Damping characteristics of ER dampers and flow rates inside ER valve with two different valve types were analyzed and compared with test results. Fluid flow inside ER valves was modeled by Bingham plastic model and Hagen-Poiseulli flow, while the equations of motion of total ER damper system were modeled by flow and hydraulic force balance. A general straight valve case was compared with a bended valve case which is newly tested for a possible improvement of ER damping force. As expected, the bended ER valve generates higher damping force and lower flow rates than the conventional straight ER valve due to additional flow restriction at the bended section. Analytical models of ER valve and ER damper generally predict reasonable performance characteristics of tested results. Therefore, developed analysis can be used for designing new ER dampers and simulation of ER semi-active suspension system as well.

  • PDF

쇼크 업소버의 소음 발생 요인과 진동감쇠 특성에 관한 연구 (A Study on the Noise Generation Cause and Vibration Damping Characteristics of Shock Absorber)

  • 신귀수;김경모;박태원;이기형;정인성
    • 한국안전학회지
    • /
    • 제13권4호
    • /
    • pp.102-112
    • /
    • 1998
  • Shock absorber has a great influence on the performance of the vehicle(ride comfort, manipulation, noise, vibration, turning, stability). Therefore, in this study we consider theoretically about general damper, variable damping oil damper, the control of vehicle Characteristics for the suspension, and undesirable phenomenon. And we measured the vibration/noise characteristics of shock absorber for the real car experimentation, strain change, and noise characteristics of shock absorber using experimental equipment. The study of domestic company and research institute on the vehicle shock absorber is active, but that of basis is not. So we think that they should be accomplished actively. Therefore, this paper will develop theoretical system on the vibration/noise characteristics of shock absorber by theoretical consideration and experimental result analysis of dynamic characteristics of shock absorber that were accomplished in this study. Then we will use it as the optimistic design data for shock absorber development.

  • PDF

The Active Dissolved Wafer Process (ADWP) for Integrating single Crystal Si MEMS with CMOS Circuits

  • Karl J. Ma;Yogesh B. Glanchandani;Khalil Najafi
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제2권4호
    • /
    • pp.273-279
    • /
    • 2002
  • This paper presents a fabrication technology for the integration of single crystal Si microstructures with on-chip circuitry. It is a dissolved wafer technique that combines an electro-chemical etch-stop for the protection of circuitry with an impurity-based etch-stop for the microstructures, both of which are defined in an n-epi layer on a p-type Si wafer. A CMOS op. amp. has been integrated with $p^{++}$ Si accelerometers using this process. It has a gain of 68 dB and an output swing within 0.2 V of its power supplies, unaffected by the wafer dissolution. The accelerometers have $3{\;}\mu\textrm{m}$ thick suspension beams and $15{\;}\mu\textrm{m}$ thick proof masses. The structural and electrical integrity of the fabricated devices demonstrates the success of the fabrication process. A variety of lead transfer methods are shown, and process details are discussed.

Modeling and Dynamic Characteristics Analysis of a Continuously Variable Damper with Electro-Hydraulic Pressure Control Valve

  • Moon, Do-Hong;Chul, Sohn-Hyun;Shik, Hong-Keum
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.174.5-174
    • /
    • 2001
  • In this paper, mathematical modeling and dynamic characteristics analysis of a continuously variable damper used for semi-active suspension systems are investigated. After analyzing the geometry of a typical continuously variable damper, models for various components including piston, orifices, spring, and valves are proposed and the flow equations during expansion and compression strokes are derived. To verify the mathematical models developed, the dynamic characteristics of the models are simulated using MATLAB/SIMULINK and are compared with experimental results. It was confirmed that the developed models represent well the actual damper and can be used for control system design.

  • PDF