• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.202-216
• /
• 1999

To control the motion of building structures under earthquakes their response should be measured first by various sensors and transformed into the control forces using some control algorithms. Of many control algorithms linear quadratic control is widely used as it is easy to implement and analyze. However the algorithms has the disadvantage that it needs the real-time measurements of all state variables(i.e, building's displacements and velocities) which are difficult to achieve for the building structures under earthquakes. Thus the practical algorithms employing output feedback are developed. In this paper LQG algorithm is used for the control of the building model with an active mass driver. The building's acceleration is used to obtain the control gain and the Kalman filter gain. The LQG control strategy is verified with the experimental study on the one-storybuilding model equipped with the active mass driver. This paper demonstrates experimentally the efficacy of the LQG algorithm based on the active mass driver system in reducing the response of seismically excited buildings.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.723-730
• /
• 2012

This paper presents a new ZVS single phase bridgeless (Power Factor Correction) PFC, using an active clamp to achieve zero-voltage-switching for all main switches and diodes. Since the presented PFC uses a bridgeless rectifier, most of the time, only two semiconductor components are in the main current path, instead of three in conventional single-switch configurations. This property significantly reduces the conduction losses,. Moreover, zero voltage switching removes switching loss of all main switches and diodes. Also, auxiliary switch turns on zero current condition. The presented converter needs just a simple non-isolated gate drive circuitry to drive all switches. The eight stages of each switching period and the design considerations and a control strategy are explained. Finally, the converter operation is verified by simulation and experimental results.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.119-124
• /
• 2014

본 논문은 절전제어를 위한 사용자 감성마진 적용 능동규칙시스템을 제안한다. 이는 공간의 조명 환경을 평가하여 사용자의 감성을 해치지 않는 범위 내에서 능동규칙을 사용하여 조도를 조절함으로써 절전을 유도하고자 하는 시스템의 일부이다. 이를 위하여, 조도 측정 및 분석 결과를 기반으로 세부적인 조도기준 범위와 사용자 감성마진 하한조도를 설정하고, 이러한 값들을 감성마진 적용 능동규칙 설계에 사용한다. 또한 이동 에이전트가 이주 대상 센서 노드들을 차례로 방문하여, 사용자 조건, 용도 및 필요에 따른 다양한 능동규칙을 통하여 센서 데이터를 수집 및 전송하며, 임의의 발생 사건들(센서 데이터 값 및 시간 등의 변화)에 상응하는 조치들을 직접 실행할 수 있는 이동에이전트를 이용한 능동규칙시스템을 설계 및 구현한다. 또한, 규칙베이스와 이동에이전트 센서 네트워크 미들웨어시스템과의 연동을 통하여 다양한 능동적 센서 네트워크 응용에의 적용 가능성을 보인다.

• 대한지역사회영양학회지
• /
• 제16권3호
• /
• pp.307-314
• /
• 2011

The purpose of this study is finding the easy way of 4 categories activity level confirmation for estimated energy requirement calculation. Total of 386, 5th and 6th grade primary school students participated. The time spent on 7 kinds of activity were collected for 1 day by the internet program developed. Judged by the activity coefficient, sedentary were 6.7% and 5.1%, low active 33.2% and 40.4%, active 43.8%, and45.5%, and very active 16.3% and 9.0% for boy and girl, respectively. The highest and significant correlation coefficient between activity coefficient and time spent on activities shown were 0.339 in commute activity for boys, and 0.466 in leisure for girls. The sensitivity of the sedentary conformation by commute hour for boys was 0.79, and that of very active was 0.56. The sensitivity of the sedentary conformation by leisure hour for girls was 0.67, and that of very active was 0.63. The sensitivity of low active and active by 7 different types of activity was quite low, 0.04~0.37. The exact agreement of activity level conformed by easy way developed was 30.8% and 33.7%, for boys and girls, respectively. More accurate way to identify 4 categories activity level needs to be developed, especially sensitive to conformation of low active and active levels.

• 정보처리학회논문지C
• /
• 제10C권4호
• /
• pp.413-422
• /
• 2003

액티브 네트워크는 패킷이 목적지에 도착하기 전에 거치게되는 중간노트에서 새로운 정책이나 코드를 추가하여 프로그램을 실행시킬 수 있는 소프트웨어 기반 차세대 네트워크이다. 이러한 액티브 네트워크 환경에서는 다이나믹하게 패킷을 처리할 수 있지만 중간 노드에서 패킷을 처리하기 위해서는 그 노드의 자원을 사용해야 한다. 따라서 액티브 네트워크에서는 기존의 네트워크와는 달리 중간노트의 자원에 접근함으로써 발생하게 되는 네트워크 보안상의 문제점들을 고려하지 않으면 안 된다. 본 논문에서는 액티브 네트워크 환경에서 액티브 노드의 자원에 접근 시 발생되는 보안상의 문제점들을 해결하기 위한 보안 강화 엔진을 제안하고, 보안 강화 엔진 내에 보안, 인증, 권한부여 모듈을 두어 액티브 네트워크 환경에 노출되어있는 악의적인 위협 요소들로부터 보호하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.282-286
• /
• 2000

In this paper, magneto-rheological(MR) damper is studied for vibration control of large infra structures under earthquake. Generally, active control devices need a large control force and a high power supply system to reduce the vibration effectively. Large and miss tuned control force may induce the dangerous situation such that the generated large control force acts to amplify the structural vibration. Recently, to overcome the weaknesses of the active control, the semi-active control method is suggested by many researchers. Semi-active control uses the passive control device of which the characteristics can be modified. Control force of the semi-active device is not generated from the actuator with power supply. It is generated as a dynamic reaction force of the device same as in the passive control case, so the control system is inherently stable and robust. Unlike the case of passive control, control force of semi-active control is adjusted depending on the measured response of the structure, so the vibration can be reduced more effectively against various unknown environmental loads. Magneto-rheological(MR) damper is one of the semi-active devices. Dynamic characteristics of the MR material can be changed by applying the magnetic fields. So the control of MR damper needs only small power. Response time of MR to the input voltage is very short, so the high performance control is possible. MR damper has a high force capacity so it is adequate to the vibration control of large infra structure. Because MR damper has a nonlinear property, normal control method used in active control may not be effective. Clipped optimal control, modified bang-bang control etc. have been suggested to MR damper by many researchers. In this study, sliding mode fuzzy control(SMFC) is applied to MR damper. Genetic algorithm is used for the controller tuning. To verify the applicability of MR damper and suggested algorithm, numerical simulation on the aseismic control is carried out. Simulation model is three-story building structure, which was used in the paper of Dyke, et al. The control performance is compared with clipped optimal control. The present results indicate that the SMFC algorithm can reduce the earthquake-induced vibration very effectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.315-322
• /
• 2008

Titanium and its alloys have excellent corrosion resistance, high strength to weight ratios and creep properties in high temperature, which make them using many various fields of application. Especially, pure titanium, which has outstanding resistance for the stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion, brings out to the best material for the heat exchanger, ballast tank, desalination facilities, and so on. Responding to these needs, welding processes for titanium are also being used GTAW, GMAW, PAW, EBW, LBW, resistance welding and diffusion bonding, etc. However, titanium is very active and highly susceptible to embrittlement by oxygen, nitrogen, hydrogen and carbon at high temperature, so it needs to shield the weld metal from the air and these gases during welding by non-active gas. In this study, it was possible to get sound beads without humping and spatter with a decrease of peak power according to increase of pulse width, change of welding speed and overlap rate for heat input control, and shield conditions at pulsed laser welding of titanium plates for Lap welding.

• 가정과삶의질연구
• /
• 제23권6호
• /
• pp.15-23
• /
• 2005

This study was conducted to understand the current leisure activities and needs for future activities among middle-aged men and women. A questionnaire survey was conducted with participants in their forties and fifties of age, who were residing in a large city.'rho survey consisted of questions on current leisure activities, leisure satisfaction, and needs for future activities. Frequency, percentage, average, consisted and Chi-square tests were used for data analysis. The results of this study are as following; First, leisure activities are necessary to enhance the quality of life in terms of spiritual and psychological stability and physical health. Second, the participants are generally not satisfied with their current leisure situations, because of insufficient leisure time, high cost, and shortage of facilities and programs. Third, current leisure behaviors of the participants are restrictive and passive. However, they show a desire to engage in diverse forms of leisure including active and participant leisure activities in the future. Fourth, they wish to perform active and participant leisure activities (for example, indoor sports, continuing education, and taking walks) at places that are close to their residence in the future.

• 한국의상디자인학회지
• /
• 제18권4호
• /
• pp.1-15
• /
• 2016

The object of this study is to find out the influence of college students' consumption value on consumer attitudes towards environmental awareness and clothing environmental behavior. Questionnaires were administered to 236 college students living in DaeguCity and Kyoungbuk province. Frequency, factor analysis, reliability analysis, regression analysis, and t-test were used for data analysis. Our findings are as follows. Consumption value of college students had factors as differentiated, consumption needs, utility, economies ostentation, others awareness, and belonging. Consumer attitudes towards environmental awareness were found as environmental importance, environmental product purchase, environmental product interest, and environmental action. Clothing environmental behavior were found as up cycle, buying eco-friendly clothing, active participation, saver purchase, and eco-friendly clothing management. The result of this study showed differentiated, others awareness, and belonging had significant effect of environmental product purchase and consumption needs, utility, and belonging had significant effect of environmental action. Differentiated, and others awareness had significant effect of up cycle, buying eco-friendly clothing, active participation, and eco-friendly clothing management. Gender of college students showed significant differences consumption value, consumer attitudes towards environmental awareness, and clothing environmental behavior.

• 패션비즈니스
• /
• 제19권4호
• /
• pp.168-182
• /
• 2015

The purpose of this study is to classify students' attitudes towards uniform modification and analyze their subjective experience regarding appearance, and body satisfaction. Questionnaires were administered to 369 middle and high school girls living in Deagu Metropolitan City. Frequency, factor analysis, reliability analysis, correlation analysis, ${\chi}^2$-test, and t-test are all used for data analysis. Our findings are as follows. Two hundred thirty students (62.3%) agreed to modify their school uniforms to express their personalities and follow fashion trends. Motives for uniform modification had to do with social life, physical attractiveness, and practicality. Attitudes toward appearance are found to be shaped by appearance internalization, active management of appearance, appearance needs, social recognition, and conformity. The motives for uniform modification reveal a significant correlation with attitudes toward appearance. Uniform modification satisfaction differed depending on sub-variables of attitude toward appearance(active management of appearance, personalized appearance needs, social recognition, and body satisfaction, such as satisfaction with height and BMI). There was a significant difference in expression of intention for future plastic surgery depending on body image.