• International Journal of Internet, Broadcasting and Communication
• /
• 제8권1호
• /
• pp.64-68
• /
• 2016

These fields are integrated to visualize and finalize the proposed development, in simulation environment. SCADA (supervisory control and data acquisition) systems and distributed control systems (DCSs) are widely deployed in all over the world, which are designed to control the industrial infrastructures, in real ways. To supervise and control the various parts of designed systems; trends to require a deep knowledge to understand the overall functional needs of industries, which could be a big challenge. Industrial field devices (or network sensors) are usually distributed in many locations and are controlled from centralized site (or main control center); the communication provides various signs of security issues. To handle these issues, the research contribution will twofold: a method using cryptography is deployed in critical systems for security purposes and overall transmission is controlled from main controller site. At controller site, multimedia components are employed to control the overall transmission graphically, such as system communication, bytes flows, security embedded parameters and others, by the means of multimedia technology.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.210-215
• /
• 2003

Korean High Speed Train (KHST) has been tested on high speed line in JungBu site since it was developed in 2002. The KHST figured 7 cars was modeled for dynamic simulation with Vampire program. and the data acquisition system was used to test successfully the on-line test for proving the dynamic performance of KHST. The comparison between test and simulation results for dynamic behavior of KHST was tried in this paper and it was very difficult because the environmental conditions and running conditions have an effect on the test results and these conditions are unable to be modeled for dynamic analysis. Also the parameters for data acquisition system for test are usually not same to simulation conditions. Therefor, in this paper the acceleration data after filtering with low pass filter below 1Hz were used to compare between test and simulation results because the low frequency range is useful to evaluate the dynamic performance for railway vehicle system, so as steady state curving acceleration. The results show that both are similar in low frequency range.

• Child Studies in Asia-Pacific Contexts
• /
• 제5권1호
• /
• pp.21-38
• /
• 2015

This paper reviews Grammatical Mapping theory, a recently proposed theoretical paradigm for understanding children's acquisition of syntax, and ventures to apply the theory to the acquisition of semantics. Particularly, we focused on the domain of space, and proposed how children might acquire a unique system of spatial words in their mother tongue. Based on our review of evidence, we propose that there may be universal semantic primitives that serve as foundations of word meanings. We also propose that children must learn their mother tongue's semantic category system of spatial relations, from real time data. Finally, we argue that children's learning of word meanings may involve creation of a theory that makes sense to the child, and that this process of theory creation is possibly guided by universal principles and parameters.

• 한국국방경영분석학회지
• /
• 제27권1호
• /
• pp.10-27
• /
• 2001

This paper deals with the application of PRICE model in estimating the proper acquisition cost for weapon budgeting phase. The PRICE(Parametric Review of Information for Costing and Evaluation) Hardware model is a computerized method for deriving cost estimates of electronic and mechanical hardware assemblies and systems. The model can be used in obtaining not only initial cost estimates in conceptual phase, but also detailed cost estimates in budgeting phase depending on available historical and empirical data. We analyzed first step cost estimate parameters and derived cost equations using PRICe output dta. Using weight and complexity, We can find cost variation. Sensitivity analysis shows that cost increases exponentially as complexity increases exponentially as complexity increases. We estimated KAAV\`s (Korea Amphibious Assault Vehicle) production cost using the PRICE model and compare with engineering cost estimates which is based on actual production data submitted by the production company. The result shows that tow estimates are close within $\pm2%$ differences.

• 한국의학물리학회지:의학물리
• /
• 제32권1호
• /
• pp.1-17
• /
• 2021

The evolution of X-ray computed tomography (CT) has been based on the discovery of X-rays, the inception of the Radon transform, and the development of X-ray digital data acquisition systems and computer technology. Unlike conventional X-ray imaging (general radiography), CT reconstructs cross-sectional anatomical images of the internal structures according to X-ray attenuation coefficients (approximate tissue density) for almost every region in the body. This article reviews the essential physical principles and technical aspects of the CT scanner, including several notable evolutions in CT technology that resulted in the emergence of helical, multidetector, cone beam, portable, dual-energy, and phase-contrast CT, in integrated imaging modalities, such as positron-emission-tomography-CT and single-photon-emission-computed-tomography-CT, and in clinical applications, including image acquisition parameters, CT angiography, image adjustment, versatile image visualizations, volumetric/surface rendering on a computer workstation, radiation treatment planning, and target localization in radiotherapy. The understanding of CT characteristics will provide more effective and accurate patient care in the fields of diagnostics and radiotherapy, and can lead to the improvement of image quality and the optimization of exposure doses.

• 대한공간정보학회지
• /
• 제7권2호
• /
• pp.143-153
• /
• 1999

지형공간정보체계는 사용이 용이하여 널리 대중화되어가고 있다. 최근 수치사진측량은 GIS데이터베이스를 구축하거나 갱신하기 위한 경제적인 방법으로 인정받아 가고 있다. 지형공간정보의 획득을 위한 근거리사진측량은 좌표해석을 위해 이용되고 있는 번들조정이 요구된다 번들조정은 외부표정요소를 결정하기 위해서 초기 근사 값과 기준점들을 필요로 한다. 본 연구에서는 번들조정을 수행하기 전에 초기근사값을 추정하기 위한 종래의 방법들을 비교분석하고, 이들 외부표정요소의 결정을 위한 새로운 알고리즘을 개발하여 비용을 절감할 수 있는 방안을 제시하고자 하였다. 우선 효과적이고 경제적이며 보다 정확한 사진측량 관측값처리 기법을 제공하고자, 기존의 DLT 알고리즘에 관측값에서의 모든 종류의 과대오차들을 자동적으로 검출하고 제거하기 위한 robust 방법과 해를 위해 필요한 기준점의 수를 줄이기 위해 GPS를 도입하였다. 또한 본 논문에서는 단사진으로 처리하는 새로운 후방교회법(space resection)유도하였다. 제안한 방법의 주된 장점은 외부표정요소의 초기근사값을 요구하지 않고 계산과정에서 반복계산을 요구하지 않는다는 점이다.

• 음성과학
• /
• 제9권1호
• /
• pp.77-88
• /
• 2002

Acoustical correlates of stress can be classified as duration, intensity and fundamental frequency. This study examined the acoustical differences in the first two syllables of stressed English words produced by ten American and Korean speakers. The Korean subjects scored very high on the TOEFL. They read at a normal speed a fable from which the acoustical parameters of eight words were analyzed. In order to make the data comparison meaningful, each parameter was collected at 100 dynamic time points proportional to the total duration of the two syllables. Then the ratio of the parameter sum of the first rime to that of the second rime was calculated to determine the relative prominence of the syllables. Results showed that the durations of the first two syllables were almost comparable between the Americans and Koreans. However, statistically significant differences showed up in the diphthong pronunciations and in the words with the second syllable stressed. Also, remarkably high r-squared values were found between pairs of the three acoustical parameters, which suggests that either one or a combination of two or more parameters may account for the prominence of a syllable within a word.

• Journal of Information Processing Systems
• /
• 제16권2호
• /
• pp.394-405
• /
• 2020

The parameters of transmission lines have an influence on the electromagnetic environment surrounding the line. This paper proposes a method based on phasor measurement unit (PMU) and supervisory control and data acquisition (SCADA) to achieve online estimation of transmission line full parameters, such as resistance, reactance and susceptance. The proposed full parameter estimation method is compared with the traditional method of estimating resistance independently based on SCADA system. Then, the electromagnetic environment is analyzed based on the different parameter estimation methods. The example results illustrate that online estimation of transmission line full parameters is more accurate in the analysis of electromagnetic environment, which further confirms its necessity and significance in engineering application.

• 항공우주시스템공학회지
• /
• 제11권2호
• /
• pp.1-8
• /
• 2017

국방획득 프로세스에서 운용자인 소요군의 명확한 요구사항을 전달하는 것은 성공적인 무기체계 획득을 위한 핵심적인 활동이다. 국방 분야에서는 소요군의 요구사항 도출 및 전달을 위해 운용요구서를 작성하고 있다. 본 연구에서는 미 국방 운용요구서를 참고하여 최근 작성된 국내 운용요구서의 양식 및 작성내용을 비교 분석하였다. 연구결과 국내의 운용요구서 양식은 일부 보완이 필요하며, 내용적 측면에서는 핵심 항목인 요구사항 파라미터에 대한 작성이 미흡하다고 판단되었다. 이러한 문제점을 보완하기 위해 본연의 목적에 적합한 운용요구서 양식을 제시하였으며, 운용성능-체계성능-핵심성능 파라미터에 대한 구체적인 정의와 설명 및 사례를 제시하여 군의 요구사항을 명확하게 전달하는 방안을 제시하였다.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.246-255
• /
• 1998

This paper presents a novel method for real-time malfunction detection of plasma etching process using EPD signal traces. First, many reference EPD signal traces are collected using monochromator and data acquisition system in normal etching processes. Critical points are defined by applying differentiation and zero-crossing method to the collected reference signal traces. Critical parameters such as intensity, slope, time, peak, overshoot, etc., determined by critical points, and frame attributes transformed signal-to symbol of reference signal traces are saved. Also, UCL(Upper Control Limit) and LCL(Lower Control Limit) are obtained by mean and standard deviation of critical parameters. Then, test EPD signal traces are collected in the actual processes, and frame attributes and critical parameters are obtained using the above mentioned method. Process malfunctions are detected in real-time by applying SPC(Statistical Process Control) method to critical parameters. the Real-time malfunction detection method presented in this paper was applied to actual processes and the results indicated that it was proved to be able to supplement disadvantages of existing quality control check inspecting or testing random-selected devices and detect process malfunctions correctly in real-time.