• 한국측량학회지
• /
• 제29권2호
• /
• pp.209-217
• /
• 2011

본 논문은 효율적인 저수지 수심측량 및 지층탐사를 위하여 음파탐지 기법을 이용한 수심측량과 지층탐사의 활용에 관한 것으로서 음향 측심기 (Echo Sounder) 및 고주파 지층탐사 장비 (Subbottom Profiler)를 이용하여 수원시 원천저수지에 대한 수심측량과 지층탐사를 수행하였다. 연구에 사용된 음향 측심기 및 고주파 지층탐사 장비는 GPS와 연결하여 선박에 설치하고 DGPS 측량 방법을 이용하여 평면위치, 수심 및 지층탐사 데이터를 동시에 취득하였다. 음향 측심기 및 고주파 지층탐사 장비를 통해 취득된 데이터는 GIS 프로그램을 이용하여 다양하게 분석함으로써 저수지의 수심 지형 저수량에 대한 결과와 저수지 침전물의 종류, 양, 두께, 분포 등에 대한 결과를 얻을 수 있었다. 이러한 데이터들과 분석 결과는 향후 저수지, 호수 및 댐 유역에 대한 장기적인 개발 관리계획을 위하여 음파탐지 기법을 이용한 다양한 관측장비를 활용하는데 다양한 정보들을 제공할 수 있을 것이다.

• 한국결정성장학회지
• /
• 제24권4호
• /
• pp.151-157
• /
• 2014

The degradation mechanisms of thermal barrier coatings (TBCs) were investigated in different thermal fatigue condition in terms of microstructural analyses. The isothermal and cyclic oxidation tests were conducted to atmospheric plasma sprayed-TBCs on NIMONIC 263 substrates. The delamination occurred by the oxide layer formation at the interface, the Ni/Cr-based oxide was formed after Al-based oxide layer grew up to ${\sim}10{\mu}m$ in the isothermal condition. In the cyclic oxidation with dwell time, the failure occurred earlier (500 hr) than in the isothermal oxidation (900 hr) at same temperature. The thickness of Al-based oxide layer of the delaminated specimen in the cyclic condition was ${\sim}4{\mu}m$ and the interfacial cracks were observed. The acoustic emission method revealed that the cracks generated during the cooling step. It was considered that the specimens were prevented from the formation of the Al-based oxide by cooling treatment, and the degradation mode in the cyclic test was dominantly interfacial cracking by the difference of thermal expansion coefficients of the coating layers.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.387-392
• /
• 2016

Lower flux leakage designs have become important in the development of microspeakers used in thin and miniaturized mobile phones. We propose four methods to reduce the flux leakage of the magnetic circuit in a microspeaker. Optimization was performed based on the proposed approach by using the response surface method. Electromagnetic analyses were conducted using the finite element method. Experimental results are in good agreement with the simulated results obtained in one degree-of-freedom analysis from 100 to 5 kHz. Both the simulated and experimental results confirm that one of the proposed methods is much more effective in reducing flux leakage than the other methods. In the optimized method, compared with a default approach, the average radial flux density in the air gap decreased only by 5.5%, the maximum flux leakage was reduced by 28.6%, and the acoustic performance at primary resonance decreased by 0.45 dB, which gap is indiscernible to the human ear.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.99-104
• /
• 2009

PTFE has good mechanical and chemical stability at a wide range of temperatures and demonstrates a low friction coefficient value. PTFE is being used for self-lubricating parts in industry. But it shows a high wear rate. Thus, PTFE and nano-diamond powder were mixed into a composite and the wear properties of a PTFE coating layer on Al6061 was investigated. A ball-on-disk type of wear tester was used under a dry condition and different temperatures of oil. After the wear test, the wear track wasexamined by optical microscope. The PTFE-diamond showed the lowest friction coefficient (0.02) of all the lubricants in the experiments. The friction coefficient was shown to be directly related to the diamond powder in the PTFE coating. Adhesion estimations were performed by a scratch test, which is mainly used for coatings. The critical load between the coating and substrate was defined through analyses of the friction load, normal load curve, and acoustic emissions, along with optical microscope observations. The scratch test results showed that an import item (SWISS) gave the highest critical load values.

• Ocean Science Journal
• /
• 제41권3호
• /
• pp.149-161
• /
• 2006

The aims of this study are 1) to construct a database using geostatistics and Geographic Information System (GIS), and 2) to derive the spatial relationships between manganese nodule abundance and other geological factors such as metal grade, slope, water depth, topography, and acoustic characteristics of the sub-bottom. Using GIS, it is possible to analyze a large amount of data efficiently, and to maximize the practical application, to increase specialization, and to enhance the accuracy of the analyses. The greater the copper and nickel grade, the higher the rating. The distribution pattern of nickel grade is similar to that of copper grade. The slopes are generally less than $3^{\circ}$ except for seamounts and cliff areas. The rating shows no correlation with slope. The rating is highest for slopes between 2.5 and $3.5^{\circ}$ in block N1 and between 4.0 and $4.5^{\circ}$ in block N3. The topography is classified into five groups: seamount, hill crest, hill slant, hill base or plain, and seafloor basin or valley. The rating proves lowest for seamount and hill crest. Our results show that the rating increases with the water depth in the study area. Nodule abundance dose not show any significant relationship with the thickness of the upper transparent layer in the study area.

• 한국음향학회지
• /
• 제31권1호
• /
• pp.11-18
• /
• 2012

본 논문은 경계가 주기적으로 변하는 주름관에 음파가 전파할 때 발생하는 차단주파수밴드 (stopband)를 이론 및 BEM으로 해석한 내용을 다루었다. 2-D 덕트를 고려하였으며 경계가 길이방향의 사인함수로 변하는 주름관에서 주름의 크기가 덕트 높이에 비해 충분히 작은 경우 다중 스케일 섭동법 (Multiple Scaling Perturbation Method)을 이용하여 해를 구하였다. 주파수가 복소수가 되는 조건에서 Bragg 공진과 Non-Bragg 공진에서 발생하는 차단주파수밴드의 형성조건을 구하였다. 2-D BEM 해석을 수행하여 주름관의 삽입손실 (Insertion Loss)을 계산하였으며 이론적으로 예측한 차단주파수밴드의 존재를 확인하였다.

• 말소리와 음성과학
• /
• 제5권4호
• /
• pp.137-143
• /
• 2013

Recent investigation of acoustic correlates of Korean stop manner contrasts has reported a diachronic transition in Korean stops: young Seoul speakers are relatively more dependent on the F0 characteristics of the stops than on the VOT characteristics in aspirated and lenis stop distinction. This finding has been examined against tonal dialects of Korean and the results suggested that the speakers of tonal dialects are not sharing the transition. These results also suggested that F0 function for segmental stop classification interferes with the function for lexical tone classification in their tonal speech. The current study investigated these findings in terms of perception. Perceptual behavior of Seoul and Busan speakers of Korean was examined in a comparative manner through the measurement of perceptual cue weight of F0 and VOT in particular. The results from regression and correlation analyses revealed that Busan speakers are closer to older Seoul speakers than to younger Seoul speakers in that the cue weight for VOT and F0 were comparable in the aspirated-lenis stop distinction. This result was in contrast to the perceptual behavior of younger Seoul speakers who showed clear dominance of F0 over VOT for the same distinction. These findings provided perceptual evidence of the dual function of F0 for segmental and lexical distinctions in tonal dialects of Korean.

• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.253-260
• /
• 2014

conducted. In-situ measurements were conducted to investigate the noise characteristics in high-speed trains such as KTX and KTX-Sancheon. Binaural microphones and spherical microphone were adopted to record and evaluate the spectral characteristics and noise incidence characteristics at the seats in the passenger cars. Environmental elements were also recorded during the noise measurements using a camcorder and GPS application. In addition, auditory tests were conducted to investigate annoyance of interior noise of high-speed trains. Based on the objective measure and subjective responses on interior noise, statistical analysis such as correlation and regression analyses were carried out. From the results perception models for evaluating the interior noise of high-speed train were derived.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.3-9
• /
• 2009

This paper presents the reduction of acoustic noise generated by electromagnetic force in an induction motor of the electrical forklift. After summarizing the electromagnetic excitation forces due to the interaction between the stator/rotor slot permeance and the stator winding magnetomotive force, the effects of the electromagnetic force on the noise and vibration of an induction motor are analyzed. In order to experimentally identify the noise sources of the motor, the signal analyses for noise and vibration are performed by using waterfall plots of noise and vibration spectrums. It is found that severe noise and vibration are caused by the electromagnetic force when the mode number of the excitation shape for a stator is low. Furthermore, it is verified that the motor noise is amplified if the excitation frequency of the electromagnetic force coincides with one of the natural frequencies of the stator. It is experimentally demonstrated that this severe noise can be considerably reduced by structure modifications. Finally, some design guidelines are suggested to develop an induction motor with a low level of noise.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.10-14
• /
• 2005

Zinc Oxide(ZnO) thin films on Si (100) substrates were deposited by RF magnetron reactive sputtering. The characteristics of zinc oxide thin films with changing sputtering conditions such as argon/oxygen gas ratios, RF power, and substrate temperature, chamber pressure and target-substrate distance were investigated. To analyze a crystallographic properties of the films, $\theta/2{\theta}$ mode X -ray diffraction, SEM, and AFM analyses. C-axis preferred orientation, resistivity, and surface roughness highly depended on Ar/$O_2$ gas ratios. The resistivity of ZnO thin films rapidly increased with increasing oxygen ratio and the resistivity value of $9{\times}10^7\;{\Omega}cm$ was obtained at a working pressure of 10 mTorr with Ar/$O_2$=50/50. The surface roughness was also improved with increasing oxygen ratio and the ZnO films deposited with Ar/$O_2$=50/50 showed the excellent roughness value of $28.7{\AA}$.