Interfacial degradation of thermal barrier coatings in isothermal and cyclic oxidation test |
Jeon, Seol
(School of Materials Science and Engineering, Pusan National University)
Lee, Heesoo (School of Materials Science and Engineering, Pusan National University) Choi, Youngkue (School of Materials Science and Engineering, Pusan National University) Shin, Hyun-Gyoo (Mateiral Technology Center, Korea Testing Laboratory) Jeong, Young-Keun (Department of Applied Hybrid Materials, Pusan National University) |
1 | W. Nelson, "Accelerated testing: statistical models, test plans, and data analysis", 344 (John Wiley & Sons, New York, 2009). |
2 | J.H. Jung, S.J. Yon and J.W. Seok, "Cubic zirconia single crystal growth using shell by skull melting method," J. Korean Cryst. Growth Cryst. Technol. 23 (2013) 124. 과학기술학회마을 DOI |
3 | H.G. Shin, Y.K. Choi, S. Jeon, M.S. Jeon and H.S. Lee, "Design of durability and lifetime assessment method under thermomechanical stress for thermal barrier coatings", Korean J. Met. Mater. 52 (2014, In press). |
4 | A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier and F.S. Pettit, "Mechanisms controlling the durability of thermal barrier coatings", Progress in Mater. Sci. 46 (2001) 505. DOI ScienceOn |
5 | A.V. Drozdov "Investigation on the microcracking of ceramic materials using the acoustic emission method", Strength of Mater. 46 (2014) 71. DOI |
6 | M. Saremi, A. Afrasiabi and A. Kobayashi, "Bond coat oxidation and hot corrosion behavior of plasma sprayed YSZ coting on Ni superalloy", J. Transaction of JWRI 36 (2007) 41. |
7 | A.C. Fox and T.W. Clyne, "Oxygen transport by gas permeation through the zirconia layer in plasma sprayed thermal barrier coatings", Surf. Coat. Technol. 184 (2004) 311. DOI |
8 | C.H. Hsueh, P.F. Becher, E.R. Fulle, S.A. Lange and W.C. Carter, "Surface-roughness induced residual stresses in thermal barrier coatings: computer simulations", In Mater. Sci. Forum 308 (1999) 442. |
9 | A.M. Limarga, R. Vassen and D.R. Clarke, "Stress distributions in plasma-sprayed thermal barrier coatings under thermal cycling in a temperature gradient", J. Appl. Mech. 78 (2011) 011003-1. DOI |
10 | J. Toscano, A. Gil, T. Huttel, E. Wessel, D. Naumenko, L. Singheiser and W.J. Quadakkers, "Temperature dependence of phase relationships in different types of MCrAlY-coatings", Surf. Coat. Technol. 202 (2007) 603. DOI |
11 | J. Toscano, R. Vaaen, A. Gil, M. Subanovic, D. Naumenko, L. Singheiser and W.J. Quadakkers, "Parameters affecting TGO growth and adherence on MCrAlY-bond coats for TBC's", Surf. Coat. Technol. 201 (2006) 3906. DOI ScienceOn |
12 | W. Brandl, H.J. Grabke, D. Toma and J. Kruger, "The oxidation behaviour of sprayed MCrAlY coatings", Surf. Coat. Technol. 86 (1996) 41. |
13 | M. Daroonparvar, M.S. Hussain and M.A.M. Yajid, "The role of formation of continues thermally grown oxide layer on the nanostructured NiCrAlY bond coat during thermal exposure in air", Appl. Surf. Sci. 261 (2012) 287. DOI |
14 | M. Daroonparvar, M.S. Hussain and M.A.M. Yajid, "The role of formation of continues thermally grown oxide layer on the nanostructured NiCrAlY bond coat during thermal exposure in air", Appl. Surf. Sci. 261 (2012) 287. DOI |
15 | B. Gudmundsson and B.E. Jacobson, "Structure Formation and Interdiffusion in Vacuum Plasma Sprayed CoNiCrAlY Coatings on IN738LC", Mater. Sci. Eng. 100 (1988) 207. DOI |
16 | M. Schutze, "Protective oxide scales and their breakdown", D. R. Holmes, Ed., Vol. 1 (John Wiley & Sons, Chichester, 1997). |
17 | W. Beele, G. Marijnissen and A. Van Lieshout, "The evolution of thermal barrier coatings-status and upcoming solutions for today's key issues", Surf. Coat. Technol. 120 (1999) 61. |
18 |
B.G. Choi, S.Y. Kim, C.W. Park, J.H. Park, Y.P. Hong and K.B. Shim, "Effect of deposition pressure on the morphology of |
19 | J.R. Nicholls, M.J. Deakin and D.S. Rickerby, "A comparison between the erosion behaviour of thermal spray and electron beam physical vapour deposition thermal barrier coatings", Wear 233 (1999) 352. |
20 | D. Stover and C. Funke, "Directions of the development of thermal barrier coatings in energy applications", J. Mater. Process. Technol. 92 (1999) 195. |
21 | X.Q. Cao, R. Vassen, F. Tietz and D. Stoever, "New double-ceramic-layer thermal barrier coatings based on zirconia.rare earth composite oxides", J. Eur. Ceram. Soc. 26 (2006) 247. DOI ScienceOn |
22 | N.P. Padture, M. Gell and E.H. Jordan, "Thermal barrier coatings for gas-turbine engine applications", Sci. 296 (2002) 280. DOI ScienceOn |
23 | H. Echsler, V. Shemet, M. Schutze, L. Singheiser and W.J. Quadakkers, "Cracking in and around the thermally grown oxide in thermal barrier coatings: A comparison of isothermal and cyclic oxidation", J. Mater. Sci. 41 (2006) 1047. DOI |
24 | A.G. Evans, D.R Mumm, J.W. Hutchinson, G.H. Meier and F.S. Pettit, "Mechanisms controlling the durability of thermal barrier coatings", Prog. Mater. Sci. (2001) 505. |
25 | W.R. Chen, X. Wu, B.R. Marple, R.S. Lima and P.C. Patnaik, "Pre-oxidation and TGO growth behaviour of an air-plasma-sprayed thermal barrier coating", Surf. Coat. Technol. 202 (2008) 3787. DOI |
26 |
A. Afrasiabi, M. Saremi and A. Kobayashi, "A comparative study on hot corrosion resistance of three types of thermal barrier coatings: YSZ, YSZ |
27 | M. Ranjbar-Far, J. Absi, G. Mariaux and F. Dubois, "Simulation of the effect of material properties and interface roughness on the stress distribution in thermal barrier coatings using finite element method", J. Mat. Design. 31 (2010) 772. DOI ScienceOn |
28 | M. Bialas, "Finite element analysis of stress distribution in thermal barrier coatings", Surf. Coat. Technol. 202 (2008) 6002. DOI ScienceOn |
29 |
K.A. Khor and Y.W. Gu, "Effects of residual stress on the performance of plasma sprayed functionally graded |
30 | M. Ranjbar-far, J. Absi, G. Mariaux and D.S. Smith, "Crack propagation modeling on the interfaces of thermal barrier coating system with different thickness of the oxide layer and different interface morphologies", J. Mat. Design. 32 (2011) 4961. DOI |
![]() |