• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.889-893
• /
• 2006

Chemical mechanical polishing (CMP) achieves surface planrity through combined mechanical and chemical means. The role of slurry is very important in metal CMP. Slurry used in metal CMP normally consists of oxidizers, complexing agents, corrosion inhibitors and abrasives. This paper investigates the effects of citric acid as a complexing agent for Cu CMP with $H_2O_2$. In order to study chemical effects of citric acid, X-ray photoelectron spectroscopy (XPS) was peformed on Cu sample after etching test. XPS results reveal that CuO, $Cu(OH)_2$ layer decrease but $CU/CU_2O$ layer increase on Cu sample surface. To investigate nanomechanical properties of Cu sample surface, nanoindentation was performed on Cu sample. Results of nanoindentation indicate wear resistance of Cu surface decrease. According to decrease of wear resistance on Cu surface removal rate increases from $285\;{\AA}/min\;to\;8645\;{\AA}/min$ in Cu CMP.

• The Korean Journal of Community Living Science
• /
• v.21 no.1
• /
• pp.71-79
• /
• 2010

This study was conducted to develop fresh-cut and processed pears. After treatment of citric acid (1%) or N-acetylcysteine (0.2 M), and co-treatment of citric acid (1%) and N-acetylcysteine (0.2 M) into the pears c.v. 'Wonhwang', the quality changes of pears during cold storage ($1^{\circ}C$) for 10 days were investigated respectively. Pear quality and the taste of pears increased much more in those treated with anti-browning agents than those in the control group at 10 days after anti-browning treatment and cold storage. Changes in Hunter b values of pears treated with 0.2 M N-acetylcysteine were insignificant. Those with Polyphenol oxidase (PPO) activity and ethylene production were had the most decreased effects and those with the phenolics compound contents were the most lowered. Firmness of fruits increased in treatment of 0.2 M N-acetylcysteine + 1% citric acid solution. The amount of respiration decreased in the application of 1% citric acid solution. Consequently, fruit freshness can be maintained more effectively by the treatment of the anti-browning agent compared to non-treatment, even if the effectiveness were different among different kinds of anti-browning agents.

• Journal of Adhesion and Interface
• /
• v.17 no.2
• /
• pp.56-61
• /
• 2016

This study was to investigate the effect of main monomer, butyl acrylate instead of 2-ethylhexyl acrylate, of acrylic PSAs on adhesive properties. The copolymers of butyl acrylate, acrylic acid and 2-hydroxyethyl acrylate were synthesized and their adhesive properties were investigated after crosslinking with two different agents. Comparing to 2-hydroxyethyl acrylate-based one which has branch-like side groups, butyl acrylate-based PSA with linear side groups show poor adhesive properties. In case of crosslinking agent, epoxy-typed agent than isocyanate-typed one showed better properties than isocyanate-typed one because epoxy-typed agent has more crosslinking sites and produces more flexible bonds, ester and ether, than isocynate-typed one. Most adhesive properties of PSAs were increased with acid content.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.168-181
• /
• 2017

Whole cell of Phanerochaete chrysosporium with reducing agent was applied to verify the degradation mechanism of aromatic compounds derived from lignin precisely. Unlike the free-reducing agent experiment, various degraded products of aromatic compounds were detected under the fungal treatment. Our results suggested that demethoxylation, $C_{\alpha}$ oxidation and ring cleavage of aromatic compounds occurred under the catabolic system of P. chrysosporium. After that, degraded products stimulated the primary metabolism of fungus, so succinic acid was ultimately main degradation product of lignin derived-aromatic compounds. Especially, hydroquinone was detected as final intermediate in the degradation of aromatics and production of succinic acid. In conclusions, P. chrysosporium has an unique catabolic metabolism related to the production of succinic acid from lignin derived-aromatic compounds, which was meaningful in terms of lignin valorization.

• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.565-568
• /
• 1995

A new antiplatelett agent, aspalatone ([3-(2-methyl-4-pyronyl)]-2-acetyloxybenzoate) was demonstrated to inhibit MDA generation from arachidonic acid catalyzed by partially purified bovine seminal vesicle cyclooxygenase. This inhibition was also observed with acetylsalicylic acid. The results suggest that the mechanism for the antiplatelet effect of aspalatone is, like acetylsalicylic acid, due to its inhibition of cyclooxygenase.

• YAKHAK HOEJI
• /
• v.35 no.2
• /
• pp.131-134
• /
• 1991

A new method for the synthesis of butibufen, which is a non steroidal anti-iriflammatory agent, is described. Friedel-Crafts reaction of isobutylbenzene with ethyl $\alpha$-chloro-.alpha.-(methylthio) acetate (1) gives ethyl $\alpha$-methylthio-(p-isobutylphenyl)acetate (2). Ethyl 2-methylthio-2-(4-isobutylphenyl)butyrate (3) is obtained from treatment of the compound (2) with NaH and Etl. Butibufen (5) is synthesized by reductive desulfurization of the compound (3) with zinc dust-acetic acid or Raney nickel, followed by hydrolysis of the resultant ethyl 2-(4-isobutylphenyl)butyrate (4).

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.472-476
• /
• 2011

Sodium chlorate/hydrochloric acid mixtures were used to chlorinate activated arenes and the $\alpha$-position of ketones. This chlorination method was used to produce selectively mono-, di-, and trichlorinated compounds by controlling the molarity of sodium chlorate. This reagent proved to be much more efficient and easier to handle than chlorine gas.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.212-214
• /
• 1990

A new synthetic method for bufexamac, which is a potent anti-inflammatory agent, was described. Friedel-Crafts reaction of butoxybenzene (2) with ethyl ${\alpha}-chloro-{\alpha}-(methylthio)acetate$ (1) gave ethyl 2-methylthio-2-(p-butoxyphenyl) acetate (3). Ethyl 2-(p-butoxyphenyl)acetate (4) was prepared by desulfurization of compound (3) with zinc dust-acetic acid. Bufexamac (5) could be easily synthesized by treatment of compound (4) with hydroxylamine HCl.

• Journal of Environmental Science International
• /
• v.9 no.1
• /
• pp.43-47
• /
• 2000

A study on the remediation of heavily for ion contaminated soils from abandoned iron mine was carried out, using ex-situ extraction process. Also, oxalic acid as a complex agent was evaluated as a function of concentration, reaction time and mixing ratio of washing agent in order to evaluate Fe removability of the soil contaminated from the abandoned iron mine. Oxalic acid showed a better extraction performance than 0.1N-HCl, i.e., the concentrations of Fe ion extracted from the abandoned mine for the former at uncontrolled pH and the latter were 1,750 ppm and 1,079 ppm, respectively. The optimum washing condition of oxalic acid was in the ratio of 1:5 and 1:10 between soil and acid solution during l hr reaction. The total concentrations of Fe ion by oxalic acid and EDTA at three repeated extraction, were 4,554 ppm and 864 ppm, respectively. The recovery of Fe ions from washing solution was achieved, forming hydroxide precipitation and metal sulfide under excess of calcium hydroxide and sodium sulfide. In addition, the amounted of sodium sulfide and calcium hydroxide for the optimal revovery of Fe were 15g/$\ell$ and 5g/$\ell$ from the oxalic acid complexes, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.635-640
• /
• 2003

Electrokinetic characteristic of natural soil dependent on flushing agents is studied to determine the best agent used in the hybrid electrokinetic remediation system. The soil containing 7.6% Fe$_2$O$_3$is spiked with lead. The flushing agents to be inject into anode are HCl, Acetic acid, Citric acid, EDTA and SDS. Test results showed that the early electrical potential of EDTA is lower than the value of the others. And the pH in anode reservoir is higher. Elcetrokinetic characteristic of all the sample except for EDTA is about the same.