• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.759-762
• /
• 1999

The concrete structures possessing good structural integrity can face durability problems due to deteriorations of concrete structures under various environmental conditions. The durability problems weaken the structural integrity in the long run. Especially, the excessive use of sea sand causes serious reinforcement corrosion and carbonation in concrete structures. An accelerated test is often used to predict deterioration as a qualitative measure, but without long term exposure test results or understanding of the relationship between the accelerated test and the long term exposure test, the accelerated test result alone can not be used effectively as a quantitative measure. In this paper, a methodology is proposed to predict the long term deteriorations, based on the result of the short-term accelerated test, of concrete containing different contents of chloride ions. Then, the correlation between two results on the steel corrosion ratio and the carbonation depth is analyzed for concrete with different chloride contents.

• Proceedings of the Korean Statistical Society Conference
• /
• 2000.11a
• /
• pp.235-240
• /
• 2000

In this paper a test of fit for exponentiality and we propose the estimator of Kullback-Leibler Information functions using the data from accelerated life tests. This acceleration model is assumed to be a tampered random variable model. The procedure is applicable when the exponential parameter based on the data from accelerated life tests is or is not specified under null hypothesis. Using Simulations, the power of the proposed test based on use condition of accelerated life test under alternatives is compared with that of other standard tests in the small sample.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1447-1448
• /
• 2011

The CSPE cables are used for three years in nuclear power plant. The accelerated thermal aging of chloro sulfonate polyethylene(CSPE) jacket of test cables were carried out for the period equal to 10, 20 and 30 years in air at 90 and $100^{\circ}C$, respectively. The electrical volume resistivity, density, XPS, FE-SEM, EDS and XRF of the accelerated thermal aging of CSPE were measured. The validation of condition monitering method of accelerated thermal aging CSPE was estimated by them. The best validation of condition monitoring method of accelerated aging CSPE is electrical volume resistivity because change thermal of the specimen showed distinction.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.04a
• /
• pp.411-419
• /
• 2006

This paper aims at designing an accelerated life test sampling plan for bulk material and showing its application for an arc-welded gas pipe. It is an integrated model of the accelerated life test procedure and bulk sampling procedure. The accelerated life tests were performed by the regulation, RSD 0005 of ATS at KITECH and bulk sampling was used for acceptance. Design parameters might be total sample size(segments and increments), stress level and so on. We focus on deciding the sample size by minimizing the asymptotic variance of test statistic as well as satisfying consumer's risk under Weibull life time distribution with primary information on shape parameter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1139-1143
• /
• 2009

Pneumatic cylinder is widely used as key component of various industry fields just like automation production line. Recently, people begin to pay attention to reduce development period and cost of pneumatic cylinder so research requirements of accelerated life test of pneumatic cylinder have been increased more than ever. In this research, we shall evaluate availability of acceleration model by statistical analysis of acceleration model's predicted value and life data which acquired in a real operation condition after finish accelerated life test of pneumatic cylinder. Also to predict the life of pneumatic cylinder in the operation condition we shall develop new acceleration model equations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.209-213
• /
• 2003

It is advantage of accelerated vibration testing to compress service exposures to operating vibration into a reduced laboratory test by increasing the amplitude or frequency of the applied input excitations. This paper proposes an accelerated test method to estimate the high-cycle fatigue life under random excitation. The method consists of conducting a test with amplified input excitation and extrapolating linearly the lift in the accelerated condition into the real lift in field condition. The extrapolation is carried out applying the high-cycle irregular excitation fatigue theory including the rainflow counting, Miner’s damage accumulation rule, and Goodman’s mean stress correction. As a verification, those estimated lift is compared with that acquired by experiment f3r the simple case of spot welding specimen with good agreement. This testing procedure will provide an useful scheme that can reduce testing period associated with developing time schedule of new product.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.73-79
• /
• 2008

Display's life time is defined as the time of 50% luminance drop. It was used luminance and temperature as accelerated factor to accelerated lifetime at test. When it's working jule-heat is generated and device's temperature is growing as any temperature because OLED is self-luminance display device. So we decided temperature condition is 25, $70^{\circ}C$, and luminance condition is $60{\sim}300cd/m^2$ in test. It's assumed accelerated lifetime model by result of the test.

• International Journal of Reliability and Applications
• /
• v.17 no.1
• /
• pp.21-49
• /
• 2016

Many mechanical, electrical and electronic products have more than one performance characteristics (PCs). For example the performance degradation of rubidium discharge lamps can be characterized by the rubidium consumption or the decreasing intensity the lamp. The product may degrade due to all the PCs which may be independent or dependent. This paper deals with the design of optimal bivariate step-stress partially accelerated degradation test (PADT) with degradation paths modelled by gamma process. The dependency between PCs has been modelled through Frank copula function. In partial step-stress loading, the unit is tested at usual stress for some time, and then the stress is accelerated. This helps in preventing over-stressing of the test specimens. Failure occurs when the performance characteristic crosses the critical value the first time. Under the constraint of total experimental cost, the optimal test duration and the optimal number of inspections at each intermediate stress level are obtained using variance optimality criterion.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.6
• /
• pp.67-74
• /
• 1995

This paper proposes the step-stress type-I censoring model for analyzing the data of accelerated life test and reducing the time of accelerated life test. In order to obtain the data of accelerated life test, the step-stress accelerated life test was run with voltage stress to CMOS Hex Buffer. The Weibull distribution, the Inverse-power-law model and Maximum likelihood method were used. The iterative procedure using modified-quasi-linearization method is applied to solve the nonlinear equation. The proposed Weibull step-stress type-I censoring model exactly estimases the life time of units, while reducting the time of accelerated life test and the equipments of test.

• Journal of Applied Reliability
• /
• v.4 no.1
• /
• pp.1-14
• /
• 2004

Accelerated life test models and procedures are developed to assess the reliability of typical power relays. The main function of relays is to control high voltage circuits by operating low voltage circuits. The accelerated life test method and test equipments are developed using the relationship between stresses and life characteristics of the products. Using the developed accelerated life test method, the parameters of the ALT model and lifetime distribution are estimated and the reliability of the relays at use condition is assessed. The proposed accelerated life test method and procedure may be extended and applied to testing similar kinds of products to reduce test time and costs of the tests remarkably.