• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.201-209
• /
• 2003

DC and AC electrical conductivity and electromagnetic interference shielding effectiveness of milled carbon fiber/nylon composites were investigated with the kind of nylon matrix. Percolation transition at which the conductivity is sharply increased was observed at about 7 vol% of milled carbon fiber. Nylon 46 as a matrix was more effective to obtain high electrical conductivity than nylon 6, and the difference in conductivity was occurred by the treatment of coupling agent. Frequency dependence of AC conductivity could be explained by relaxation phenomenon at just below percolation and resonance phenomenon at 40 vol% of carbon fiber, respectively. Negative temperature coefficient phenomenon was found in all composites. Electromagnetic interference shielding effectiveness was increased with the concentration of carbon fiber. At a high conductivity region the return loss was more dominant to the total shielding effectiveness than the absorption loss.

• Journal of Dairy Science and Biotechnology
• /
• v.28 no.1
• /
• pp.17-28
• /
• 2010

A substantial body of evidence has emerged over the last decade in support of the novel concept that dietary calcium and dairy foods play an important role in regulating energy metabolism and thereby promote healthy weight management and reduce obesity risk. This concept has been demonstrated in experimental animals studies, cross-sectional and prospective population studies and a number of randomized clinical trials. Notably, the effects of dairy foods in weight management are more consistent than the effects of supplemental calcium across clinical trials, and calcium per se is responsible for approximately 40-50% of the effects of dairy. The calcium component is only effective in individuals with chronically low calcium intake, as it serves to prevent the endocrine response to low calcium diets which otherwise favors adipocyte energy storage; calcium also serves to promote energy loss via formation of calcium soaps in the gastrointestinal tract and thereby reduce fat absorption. The calcium-independent anti-obesity bioactivity of dairy resides primarily in whey. The key components identified to date are leucine and bioactive peptides resulting from whey protein digestion. The high concentration of leucine in whey stimulates a repartitioning of dietary energy from adipose tissue to skeletal muscle where it provides the energy required for leucine-stimulated protein synthesis, resulting in increased loss of adipose tissue and preservation of skeletal muscle mass during weight loss. Finally, dairy rich diets suppress the oxidative and inflammatory responses to obesity and thereby attenuate the diabetes and cardiovascular disease risk associated with obesity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.484-491
• /
• 2000

Soft denture liners or conditioners may be valuable therapeutic materials. The life of these liners is short and varies, but it can be extended by the use of a mono-poly(polymethyl methacrylate coating material). This study determined whether coating three temporary soft denture liners with mono-poly affected the resiliency of soft liners, and evaluated the ability of mono-poly to prevent water absorption and alcohol loss from the underlying soft liners. $20{\times}12mm$ cylindrical specimens of Coe-Soft, Soft-Liner, Coe-Comfort soft lining materials were made and divided into two groups of mono-poly uncoated(control) and mono-poly coated specimens. Specimens were immersed in water and compressed on an instron universal testing machine and weighed at initial, 24 hours, 1 week, 2 weeks, and 4 weeks. Resiliency was determined by measuring the energy absorbed by the soft liners when stressed to a specific yield point. Mono-poly coating significantly increased the resiliency of the Soft-Liner, but had no effect on the other soft liners. Among the 3 soft liners, Soft-Liner showed the hightest resiliency and modulus of elasticity. The weight loss in Soft-Liner was the least among the 3 liners, and the weight loss in Coe-Soft was decreased by monopoly coating.

• Food Science of Animal Resources
• /
• v.38 no.4
• /
• pp.823-828
• /
• 2018

The purpose of this study was to evaluate the suitability of the released water (RW) method for measuring water-holding capacity (WHC) by pressure and filter-paper absorption within two thin plastic films. One hundred fifty pork loins with considerable variations in WHC (three pork qualities: PSE, pale, soft, and exudative; RFN, reddish-pink, firm, and nonexudative; and DFD, dark, firm, and dry; 50 pork loins in each pork quality group) were used to measure drip loss (DL)% and RW % after applying different loads (1.5, 2.0, 2.5, 3.0 and 3.5 kg). Percentages of DL and RW were significantly (p<0.05) different among pork quality groups. The RW % of 2.5 kg load sample was significantly (p<0.05) higher than that of 2.0 kg or 1.5 kg load sample. However, there were no significant (p>0.05) differences in RW % among 2.5 kg, 3.0 kg, and 3.5 kg load samples for all three pork quality groups. The RW % was highly and positively correlated (r>0.95; p<0.001) with DL %. The highest correlation was observed between DL % and RW % of 2.5 kg load sample (r=0.97; p<0.001). Among all RW loads within each quality groups, the highest correlation between DL % and RW % was observed for 2.5 kg load sample (r=0.43, 0.66, and 0.46 for PSE, RFN and DFD quality groups, respectively, p<0.001). These results imply that applying 2.5 kg load is the best for determination of RW %. It is recommended as a reference method to assess DL % of pork muscles.

• KIEAE Journal
• /
• v.3 no.2
• /
• pp.37-44
• /
• 2003

The aim of this study was to analyze the thermal performance through Test-Cell of TI-wall in domestic climate. This study was carried out as follows: 1) The TI-wall was studied for ability to reduce heat loss through the building envelope and analyzed to TIM properties. 2) Test models of TI-wall were designed through the investigation of previous paper and work, measured for winter and spring, and the thermal effects were analyzed. The type of the TIM used in test model is small-celled(diameter 4mm and thickness 50mm) capillary and cement brick(density $1500kg/m^3$) was used by thermal mass. 3) Test-cell of TI-wall was calibrated from measured data and the dynamic simulation program ESP-r 9.0. In these simulations, the measured climate conditions of TaeJon were used as outdoor conditions, and the simulation model of Test-cell was developed. 4) The sensitivity analysis is executed in various aspects with standard weather files and ESP-r 9.0, and then most suitable system of TI-wall are predicted. Finally, The suitable system of TI-wall was analysed according to sizes of air gap, kinds, thickness, and the surface absorption of therm wall. The result is following. In TI-wall, Concrete is better than cement brick, at that time the surface absorption is 95%, and the most efficient thickness is 250mm. As smaller of a air gap, as reducer of convection heat loss, it is efficient for heating energy. However, ensuring of a air gap at least more than 50mm is desirable for natural ventilation in Summer.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.420-428
• /
• 2009

In this study, the composites containing carbon black (CB) or carbon fibers were prepared, and the microwave absorbing properties and the absorption mechanism of them were investigated and discussed in the frequency range of 2-18 GHz, respectively. The optimum mass fraction of CB has been found as 6%, and the carbon fibers were discovered to absorb radar wave either under parallel or vertical polarization, the suitable gap distance between each bundle of which was 5 mm. According to the results of the single constitute absorber samples, the structured composites with the two kinds of absorbers combination were fabricated and studied at 2-18 GHz. The top layer absorbers affect the absorption performance a lot; the maximum reflection loss of composites with CB as top layer absorbers was -31.8 dB with the frequency range of 2.4 GHz below -10 dB, and the other type with CFs as the top layer absorbers obtained the reflection loss peak value of -31.4 dB with 2 GHz below-10 dB.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.52-60
• /
• 1999

Fabricability of phase shifted grating filters has been theoretically studied by an effective index transfer matrix method. In the optical band-pass filter with multiple ${\lambda}/4$ phase-shifts, the phase-shift error and random variation of the grating period should be suppressed such that corresponding resonance frequency lies within, the filter pass-band. The tolerance for the relative error is less than $10^3$, and is quite stringent in typical filters for WDM application. End facet reflection produces ripple in the transmission spectra and the reflectivity should be less than 1% in order to keep the ripple less than 0.25dB. Also, the effect of waveguide absorption loss is enhanced by the resonance in the filter, and the absorption should be limited to 1dB/cm for the signal loss of less than 0.2dB.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.4
• /
• pp.556-562
• /
• 2013

We examined the anti-obesity effects of water-soluble polysaccharides (WSP-A) extracted from the seaweed Hijikia fusiforme (Tott in Korean). The extracted alginate-like polysaccharide (verified by FT-IR and HPAEC-PAD analysis) was examined in a lipase inhibition assay and animal experiments. WSP-A inhibited lipase up to 30%, with over 80% of the initial activity retained until the 1 hour reaction in vitro. There was a 30% loss in the rate of weight gain in rats fed a high-fat diet. WSP-A therefore seems to serve as a healthy weight loss agent by inhibiting lipases, thus preventing the absorption of fat in the body.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.3-9
• /
• 1988

Infrared (IR) spectroscopic techniques for the analysis of wood samples and the absorbance spectra of solid woods were presented. KBr pellets were prepared by throughly mixing approximately 300 mg of dried KBr and 1 mg of finely milled wood powder extracted with ethanol-cyclohexane previously. This mixture was made into a transparent disc by means of a pellet-making die (10 ton/$cm^2$ for 10 min). This IR techniques were applied for the analysis of archaeological wood samples. The most notable difference in the IR spectra between the recent and the archaeological waterlogged woods is that the absorption band centered at $1,730cm^{-1}$ was significantly diminished in the waterlogged ones. Total loss of absorption in $1,730cm^{-1}$ might be mainly due to the result of hemicellulose degradation. Another feature indicated by IR spectral comparision are that the degraded waterlogged wood samples showed 1) the increased intensity of the 1,600, 1,500 and $1,270cm^{-1}$ due to the residual lignin and the increased intensity at 1,470 and $1,425cm^{-1}$ due to the degradation of hemicellulose and 2) to the emergence of single band around $1,050cm^{-1}$ instead of three bands at 1,110, 1,060 and $1,040cm^{-1}$ in recent wood due to the degradation of cellulose crystalline. It was revealed from the IR examinations that the first change of wood in the waterlogged situation was the lysis of hemicellulose and the second the lysis of cellulose. It was also suggested that IR spectroscopy could serve a fast method for the investigation on the chemical characteristics of archaeological wood samples.

• Journal of Pharmacopuncture
• /
• v.20 no.1
• /
• pp.36-44
• /
• 2017

Objectives: The goal of this study was to characterize Suvarna Bhasma Parada Marit by using the Ayurvedic test parameters, physico-chemical tests, and various instrumentation techniques. Methods: Suvarna Bhasma, an Ayurvedic formulation manufactured as per Bharat Bhaishajya Ratnakar 5/8357 (BBR), has been studied using various instrumentation techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), laser particle size distribution (PSD) analysis, fourier transform infrared spectroscopy (FT-IR), and atomic absorption spectroscopy (AAS), and physico-chemical parameters, such as the loss on drying (LOD), loss on ignition (LOI), and acid insoluble Ash (AIA) were determined. In addition, Ayurvedic tests, such as Rekhapurnatva (enterable in the furrows of the fingers), Varitaratwa (floatable over water), Nirdhoomta (smokeless), Dantagre Kach-Kach (gritty particle feeling between the teeth), were performed. Results: The XRD study showed Suvarna Bhasma to be crystalline in nature and to contain more than 98% gold. The mean size of the gold crystallites was less than 10 microns, and the morphology was globular and irregular. Suvarna Bhasma contains gold as its single and major element, with EDAX and FT-IR spectra showing that it is more than 98% pure gold. The moisture content (LOD) is less than 0.5%, the LOI is less than 2%, and the AIA is not less than 95%. The Ayurvedic tests, as specified above, helped to confirm the quality of Suvarna bhasma prepared as per the text reference (BBR). Conclusion: This chemical characterization of Suvarna Bhasma performed in this study by using modern instrumentation techniques will be helpful in understanding its pharmacological actions and will help in establishing quality protocols and specifications to substantiate the safety, efficacy & quality of Suvarna Bhasma.