• International journal of advanced smart convergence
• /
• 제12권2호
• /
• pp.167-172
• /
• 2023

In this study, the absolute and relative strength of six upper extremity resistance exercises were measured by classifying resistance exercise experts and non-experts. As a result, the skilled group showed higher absolute and relative muscle strength than the unskilled group in the 6 upper extremity resistance exercises. These results are judged to be the hypertrophy of fast-twith muscles, the mobilization of motor units, and the increase in the speed of nerve conduction while the skilled person consistently performs resistance exercise. Experts use intermuscular coordination efficiently to stably perform the load according to the movement and exercise intensity performed during exercise, whereas the inexperienced person uses relatively large muscle groups rather than efficiently using intermuscular coordination. It is considered that exercise motion and load were performed by mobilizing. In addition, as a result of comparing the absolute and relative muscle strength between the 6 types of upper limb resistance exercises, there was a difference between the 6 types of upper limb resistance exercises in the two groups. It can be judged that greater muscle strength and endurance were created through liver coordination.

• The Journal of Korean Physical Therapy
• /
• 제25권4호
• /
• pp.167-173
• /
• 2013

Purpose: To obtain the isokinetic normative data of isokinetic laboratory of department of Rehabilitation Medicine in the normal subjects for those twenties of Korea. Methods: A total of 228 volunteers participated in this study and isokinetic evaluation of knee extensors and flexors at speed $60^{\circ}/sec$ BIODEX System 3 Isokinetic Dynamometer was performed in 128 males and 100 females. Results: In the normal subjects for those twenties, Normative data were presented. Absolute muscle strength of knee-extensors and knee-flexors, Relative muscle strength, bilateral muscle strength deficit, and flexor/extensor strength ratio were presented. Conclusion: Those results expect that it will be available for patients with 20's knee diseases to apply as the basic materials for the muscle function improvement of knee extensors and flexors.

• Kyungpook Mathematical Journal
• /
• 제33권2호
• /
• pp.141-148
• /
• 1993

• Computers and Concrete
• /
• 제3권6호
• /
• pp.389-400
• /
• 2006

This paper presents the investigations towards developing a better understanding on the contribution of steel fibers on the tensile strength of high-performance fiber reinforced concrete (HPFRC). An extensive experimentation was carried out with w/cm ratios ranging from 0.25 to 0.40 and fiber content ranging from zero to 1.5 percent with an aspect ratio of 80. For 32 concrete mixes, flexural and splitting tensile strengths were determined at 28 days. The influence of fiber content in terms of fiber reinforcing index on the flexural and splitting tensile strengths of HPFRC is presented. Based on the test results, mathematical models were developed using statistical methods to predict 28-day flexural and splitting tensile strengths of HPFRC for a wide range of w/cm ratios. The expressions, being developed with strength ratios and not with absolute values of strengths and are applicable to wide range of w/cm ratio and different sizes/shapes of specimens. Relationship between flexural and splitting tensile strengths has been developed using regression analysis and absolute variation of strength values obtained was within 3.85 percent. To examine the validity of the proposed model, the experimental results of previous researchers were compared with the values predicted by the model.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.95-101
• /
• 2015

To accurately extract absolute distance information from a self-mixing interferometry (SMI) signal, in this paper we propose an approach based on a particle swarm optimization (PSO) algorithm instead of frequency estimation for absolute distance. The algorithm is utilized to search for the global minimum of the fitness function that is established from the self-mixing signal to find out the actual distance. A resolution superior to $25{\mu}m$ in the range from 3 to 20 cm is obtained by experimental measurement, and the results demonstrate the superiority of the proposed approach in comparison with interpolated FFT. The influence of different external feedback strength parameters and different inertia weights in the algorithm is discussed as well.

• 국제물리치료학회지
• /
• 제9권1호
• /
• pp.1426-1434
• /
• 2018

This study was conducted to observe the isokinetic strength (IS) of the hip, ankle, and knee joints in young age groups. Thirty eight men and thirty one women with mean age of $30.4{\pm}3.5$ and $32.8{\pm}4.4years$, respectively, were enrolled in this study. Measurements of hip flexion, extension, abduction, and adduction at $30^{\circ}/sec$, Knee flexion and extension at $60^{\circ}/sec$, ankle inversion, eversion, plantarflexion, and dorsiflexion $30^{\circ}/sec$ were conducted. Absolute IS (Nm), relative IS (Nm/kg), strength ratios, correlations between movements were observed. Significant differences in absolute and relative strength were observed between groups in all movement except in the relative ankle strength. Relative isokinetic strength ratios of hip flexion/extension were .45 and .55, knee flexion/extension were .84 and .89, ankle dorsi/plantarflexion were .30 and .29, and ankle eversion/inversion were .86 and .84 for men and women, respectively. In the hip extension, men had about three times the body weight, and women had about 2.5 times the strength. The abduction muscle had about 1.5 times the body weight of both men and women. Height and body weight showed the significantly strong correlating relationship with hip (r, .76-.86) and knee (r, .67-.84) strength. However, ankle strength showed the comparatively correlating relationship, especially in women (r, .03 - .36). Similar age and physique characteristics of female and male groups could provide useful isokinetic strength reference values for developing the exercise program for healthy and rehabilitation groups.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.677-682
• /
• 2000

Porous concrete is defined as d type of concrete for which the fine aggregate component the matrix is entirely omitted. Although it had been used as a building material in Europe for over 60 years, low strength and high void ratio limited its application in the past. In recent years, however high void ratio of concrete has been recognized again and can be used as an environmental conscious material, for example, parking lots, draining light-traffic-volume pavements and as sea water purifying material. The result of an experiment on the void ratio of fiber reinforced porous concrete and its influence on the compressive strength and permeability relationship of concrete are reported in this paper. One-sized coarse aggregate of 5-10mm, and three absolute content of fiber(steel fiber, polyprophylen fiber) were used. The result of measured void ratio, permeability coefficient and compressive strength show a small variation. Void ratio, permeability coefficient and compressive strength of fiber reinforced porous concrete depend on contents of fiber and absolute volume ratios of paste to aggregate.

• 대한물리치료과학회지
• /
• 제24권1호
• /
• pp.69-78
• /
• 2017

Background: The purpose of the present study is to report the effect of muscle performance on knee flexion and extension by chin in exercise. Methods: This study was Participated in 10 healthy subjects. For conducting the chin-in exercise, subjects are lay down with supine position. Using the rounded towel, subjects was performed contraction of longus colli and longus capatis muscle by push the towel. Chin-in exercise was conducted 3 times a day, 4 times a week for 4 weeks. By using the Biodex system4, We measured absolute muscle strength, relative muscle strength, total exercise quantity and average rate of production in knee flexion and extension. The data was analyzed by the repeated-measure ANOVA for comparing before, after exercise 2 weeks, after exercise 4 weeks changes of factors. Results: After chin-in exercise, there was significant difference of before, after 2 weeks and 4weeks results in absolute muscle strength, relative muscle strength, total exercise quantity, average rate of production, agonist/antagonist ratio(p<.05). Conclusion: As a results of this study, chin-in exercise may help to improve muscle ability of knee joint activation and knee joint action performance.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.25-32
• /
• 1998

Most recent seismic design codes include Response Modification Factor(RMF) for determining equivalent lateral forces. The RMF is used to reduce the linear elastic design spectrum to account for the energy dissipation capacity, overstrength and damping of the structure. In this study the RMF is defined as the ratio of the absolute maximum linear elastic base shear to the absolute maximum nonlinear base shear of a structure subject to the same earthquake accelerogram. This study investigates the effect of hysteretic model, as well as target ductility ratio and natural period on duct based RMF using nonlinear dynamic analyses of the SDOF systems. Special emphasis is given to the effects of the hysteretic characteristics such as strength deterioration and stiffness degradation. Results indicate that RMFs are dependent on ductility, period and hysteretic model.

• Geomechanics and Engineering
• /
• 제34권6호
• /
• pp.697-726
• /
• 2023

Brittleness as an important property of rock plays a crucial role both in the failure process of intact rock and rock mass response to excavation in engineering geological and geotechnical projects. Generally, rock brittleness indices are calculated from the mechanical properties of rocks such as uniaxial compressive strength, tensile strength and modulus of elasticity. These properties are generally determined from complicated, expensive and time-consuming tests in laboratory. For this reason, in the present research, an attempt has been made to predict the rock brittleness indices from simple, inexpensive, and quick laboratory test results namely dry unit weight, porosity, slake-durability index, P-wave velocity, Schmidt rebound hardness, and point load strength index using multiple linear regression, exponential regression, support vector machine (SVM) with various kernels, generating fuzzy inference system, and regression tree ensemble (RTE) with boosting framework. So, this could be considered as an innovation for the present research. For this purpose, the number of 39 rock samples including five igneous, twenty-six sedimentary, and eight metamorphic were collected from different regions of Iran. Mineralogical, physical and mechanical properties as well as five well known rock brittleness indices (i.e., B₁, B₂, B₃, B₄, and B₅) were measured for the selected rock samples before application of the above-mentioned machine learning techniques. The performance of the developed models was evaluated based on several statistical metrics such as mean square error, relative absolute error, root relative absolute error, determination coefficients, variance account for, mean absolute percentage error and standard deviation of the error. The comparison of the obtained results revealed that among the studied methods, SVM is the most suitable one for predicting B₁, B₂ and B₅, while RTE predicts B₃ and B₄ better than other methods.