• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.894-899
• /
• 2000

An automatic mesh generation system with unstructured quadrilateral elements on trimmed NURBS surfaces has been developed.. In this paper, NURBS surface geometries in the IGES format have been used to represent model shape. NURBS surface is represented as parametric surface. So each surface could be mapped to a 2D parametric plane through the parametric domain. And then meshes with quadrilateral elements are constructed in this plane. Finally, the constructed meshes are mapped back to the original 3D surface through the parametric domain. In this paper, projection plane, quasi-expanded plane and parametric Plane are used as 2D mesh generation plane. For mapping 3D surface to parametric domain, Newton-Rhapson Method is employed. For unstructured mesh generation with quadrilateral elements on 2D plane, a domain decomposition algorithm using loop operators has been employed. Sample meshes are represented to demonstrate the effectiveness of the proposed algorithm.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.466-471
• /
• 2005

The out-of-plane deformation in thin plate structure has been a serious qualify problem. It has been known that the out-of-plane deformation is caused by the angular deformation of welded joint. However, experimental results show that the conventional theory based on angular deformation is not appropriate for prediction of the out-of-plane deformation in thin plate structure. In this study, large deformation plate theory is introduced to clarify the effect of residual stress on the out-of-plane deformation. A simple equation is proposed to predict the out-of-plane deformation. The results by the proposed method show good agreement with the experimental results.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.441-445
• /
• 2013

ZnO nanowires on the a-, c- and m-plane oriented 4H-SiC substrates were grown by using a high temperature tube furnace. Ti/Au electrodes were deposited on ZnO nanowires and a-, c- and m-plane 4H-SiC substrates, respectively. The shape and density of the ZnO nanowires were investigated by field emission scanning electron microscope. It was found that the growth direction of nanowires depends strongly on growth parameters such as growth temperature and pressure. In this work, The sensitivity of nanowires formed a-, c- and m-plane oriented 4H-SiC gas sensor was measured at $300^{\circ}C$ with CO gas concentration of 80%. The nanowires grown on a-plane oriented 4H-SiC show improved sensing performance than those on c- and m-plane oriented 4H-SiC due to the increased density of nanowire on a-plane 4H-SiC.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제28권4호
• /
• pp.399-411
• /
• 2021

We consider a Weierstrass semigroup at a generalized flex on a smooth plane curve. We find the candidates of a Weierstrass semigroup at a 2-flex of higher multiplicity on a smooth plane curve of degree d ≥ 5, and give some examples to show the existence of them.

• 한국운동역학회지
• /
• 제19권1호
• /
• pp.59-66
• /
• 2009

본 연구의 목적은 국내 엘리트 골프선수들을 대상으로 3차원 스윙 평면 분석(swing plane analysis)을 통해 스윙 평면의 편평도를 확인하여 이들 스윙이 어떤 유형의 스윙인지를 확인하는 것이 목적이었다. 또한 편평도를 이용한 스윙평면 분석 이외에 또 다른 운동학적 변인을 이용한 스윙 평면 분류가 가능한지도 확인하였다. 그 결과 편평도와 핸디캡간의 상관성은 없는 것으로 판명되었고 단일 및 다중 평면 스윙 그룹간의 편평도 비교를 실시한 결과 유의한 차이를 확인할 수가 있었다. 두 스윙 그룹을 구분하는 대표적인 특징인 백스윙 및 팔로우드로우에서의 스윙 궤도차이를 확인하기 위해 실시한 두 스윙 그룹 간 event 별 편평도 비교에서 그 유의한 차이를 확인함으로서 본 연구에서 정의한 오차범위 10cm는 두 스윙 스타일을 구분하는데 유효한 것으로 확인이 되었다. 편평도를 이용한 스윙평면 분석 이외에 운동학적 변인인 두 스윙 그룹 간 샤프트 단위벡터 비교와 샤프트 원위점 변위 비교를 event 별로 실시한 결과 통계적으로 유의한 차이는 확인이 되지 않았다. 하지만 전체적인 변인들의 이동패턴을 살펴 볼 때 각각의 스윙 그룹의 특징을 잘 보여주고 있기 때문에 스윙 스타일을 판단하는 간접적인 지표가 될 가능성을 보여주었다.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.333-354
• /
• 1990

This study was designed to analyse vertical dysplasia such as open bite or deep bite in persons with skeletal Class III malocclusion. The subjects consisted of 60 control patients, 40 Class III open bite patients and 40 Class III deep bite patients. The mean age was 19.8 years in the control group, 17.8 years in the Class III open bite group and 16.5 years in the Class III deep bite group. The results were as follows: 1. In Class III malocclusion patients, the characteristics of the vertical dysplasia are under the palatal plane. 2. In Class III malocclusion patients, the items showing the characteristics of the vertical dysplasia are mandibular plane angle, lower gonial angle, lower facial height, dental height & inclination of the upper first molar, interincisal angle, maxillary & mandibular occlusal plane angle. 3. In Class III malocclusion patients, LPFH/LAFH ratio shows the highest significance among the facial height ratios. 4. In Class III malocclusion patients, open bite group has a upward cant of maxillary occlusal plane & downward cant of mandibular occlusal plane. And deep bite group has a downward cant of maxillary occlusal plane & upward cant of mandibular occlusal plane. 5. In Class III malocclusion patients, the molar teeth of the open bite group are measially inclined and those of the deep bite group are upright.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.187-192
• /
• 2002

In-plane ESPI(Electronic Speckle Patten Interferometry)was devised to measure in~plane defamation and rotation of a specimen with laser in this study. The conventional measuring methods of surface deformations such as the strain gauge have many demerits because they are contact and point-to-point measuring ones. But that ESPI is noncontact, nondestructive and whole field measuring method can overcome previous disadvantages. We used ESPI which is sensitive to in-plane displacement for measuring in-plane deformations of a disk. First of all, the system calibration was done due to an in-plane rotation before getting deformations of a disk. Finally we showed good agreement between theexperiment results and those of the FEA(Finit Element Analysis).

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.173-182
• /
• 1996

An analytical model has been developed to predict the elastic properties of a filled resin reinforced by chopped fibers, a three-phase composite such as a filled sheet molding compound(SMC). In the model the matrix material and fillers form an effective matrix. The effective matrix is then considered to be reinforced with long fibers lying in the sheet plane but randomly oriented in the plane. Expressions for the resulting transversely isotropic composite properties are explicitly presented. Using this model, the Young's and shear moduli are calculated for the SMC sample with filler weight fraction of 35% and fiber content of 30%. The same properties are also determined experimentally. The agreement between the calculated and measured elastic moduli is found to be very good for the in-plane properties. However, the out-of-plane properties show a large difference because the effect of voids is not taken into account in the model.

• 한국결정성장학회지
• /
• 제25권2호
• /
• pp.56-61
• /
• 2015

Ga source 채널의 HCl flow가 700 sccm, 그리고 V/III족 비가 10으로 고정되었을 때, r-면 사파이어 위에 HVPE로 성장된 a-면 GaN 에피층 특성에 대한 성장 온도 영향을 연구하였다. 추가적으로 성장온도가 $1000^{\circ}C$, 그리고 Ga source 채널의 HCl flow가 700 sccm으로 고정되었을 때, 공급가스에 대한 V/III족 비 영향에 대하여 연구하였다. 성장온도가 높아지면서, a-면 GaN 에피층에 대한 (11-20) 면의 Rocking curve(RC)의 반치폭 값이 감소하였고 a-면 GaN 에피층의 성장두께는 증가하였다. $1000^{\circ}C$에서 V/III족 비가 높아짐에 따라, (11-20) 면의 RC의 반치폭 값이 감소하였고, a-면 GaN 에피층의 성장두께가 증가하였다. $1000^{\circ}C$와 V/III족 비=10에서 성장된 a-면 GaN 에피층이 (11-20) 면에서 가장 낮은 RC 반치폭인 734 arcsec을 보이며, RC측정을 통한 (11-20) 면의 방위각 가장 작은 영향을 보여준다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권4호
• /
• pp.239-244
• /
• 2003

The common errors in preoperative treatment plan for the orthognathic surgery can be occurred during cast impression, cast mounting procedure with face-bow transfer, surgical stent fabrication, and so on. One of the most common errors exists during mounting process of the model on the articulator. Accurate mounting of dental casts to articulator should be achieved by transferring the 3-dimensional spatial relationship of the maxillary arch to an articulator. A face-bow is used for transfer this relationship to articulator, usually by relating the face-bow to a plane of reference of maxillary cast. The purpose of this study is evaluation of the accuracy of face-bow transferring of maxillary model to the articulator. The maxillary casts of thirty patients for orthognathic surgery were mounted on articulator with an face-bow instrument. The relationship of occlusal plane angle to Frankfort horizontal plane relations were compared the cephalogram with the cast-mounted articulator. As a result of this study, the significant difference between the maxillary occlusal planes angle in the cephalogram and articulator were found. The results were followed, 1. The mean occlusal plane angle in cast-mounted articulator was $13.5^{\circ}\;(SD{\pm}5.4)$. 2. The mean occlusal plane angle in cephalogram was $10.4^{\circ}\;(SD{\pm}4.3)$. 3. The mean difference of occlusal plane angle between cast-mounted articulator and cephalogram was $3.3^{\circ}\;(SD{\pm}4.6)$. According to the result, we should suggest that the occlusal plane angle to Frankfort plane in cast-mounted articulator is more steeper than that of cephalogram. And then, maxillofacial surgeon should try to get a more predictable result by suggesting the proper correction method and mounting the cast accurately.