• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.100-100
• /
• 2010

Hydrophilic $TiO_2$ films were deposited on slide glasses using titanium tetraisopropoxide (TTIP) as a precursor by metal-organic chemical vapor deposition (MOCVD). The temperature of substrate was $400^{\circ}C$ and the temperatures of precursor were kept at $75^{\circ}C$ (sample A) and $60^{\circ}C$ (sample B) during the $TiO_2$ film growth. The deposited $TiO_2$ films were characterized by contact angle measurement and uv/vis spectroscopy. The result show that sample B has very low contact angle of almost zero due to superhydrophilic $TiO_2$ surface and transmittance is $76.85%{\pm}1.47%$ at the range of 400 - 700 nm. So, this condition is very optimal for hydrophilic $TiO_2$ film deposition. However, when the temperature of precursor is lower is lower than $50^{\circ}C$ or higher than $75^{\circ}C$, $TiO_2$ could not be deposited on the substrate and cloudy $TiO_2$ film was formed due to low precursor temperature and the increase of surface roughness, respectively.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권7호
• /
• pp.349-353
• /
• 2006

[ $TiO_2-Nb_2O_5$ ] sol was prepared using sol-gel method. Crystalline properties of gel powder changed from rutile phase to anatase phase with increasing $Nb_2O_5$ additives at $800^{\circ}C$, while they retained rutile phase regardless of $Nb_2O_5$ additives at $900^{\circ}C,\;1,000^{\circ}C$. They retained amorphous phase from $50^{\circ}C\;to\;400^{\circ}C$, retained anatase phase from $500^{\circ}C\;to\;600^{\circ}C$ and had rutile phase over $700^{\circ}C$ at 1mole% $Nb_2O_5$ additive. After $TiO_2-Nb_2O_5$ sol retained low viscosity with normal chain structure for a long time, its viscosity increased fast with network structure. DTA properties of gel powder had endothermic reaction due to evaporation of propanol and water about $78^{\circ}C$, had exothermic reaction due to propanol combustion about $290^{\circ}C$ and had exothermic reaction due to changing of $TiO_2$ phase about $640^{\circ}C$.

• 한국환경과학회지
• /
• 제17권8호
• /
• pp.933-941
• /
• 2008

The formation of $Co_nTiO_{n+2}$ compounds, i.e., $CoTiO_3$ and $CO_2TiO_4$, in a 5wt% $CoO_x/TiO_2$ catalyst after calcination at different temperatures has been characterized via scanning electron microscopy (SEM), Raman and X-ray photoelectron spectroscopy (XPS) measurements to verify our earlier model associated with $CO_3O_4$ nanoparticles present in the catalyst, and laboratory-synthesized $Co_nTiO_{n+2}$ chemicals have been employed to directly measure their activity profiles for CO oxidation at $100^{\circ}C$. SEM measurements with the synthetic $CoTiO_3$ and $CO_2TiO_4$ gave the respective tetragonal and rhombohedral morphology structures, in good agreement with the earlier XRD results. Weak Raman peaks at 239, 267 and 336 $cm^{-1}$ appeared on 5wt% $CoO_x/TiO_2$ after calcination at $570^{\circ}C$ but not on the catalyst calcined at $450^{\circ}C$, and these peaks were observed for the $Co_nTiO_{n+2}$ compounds, particularly $CoTiO_3$. All samples of the two cobalt titanate possessed O ls XPS spectra comprised of strong peaks at $530.0{\pm}0.1$ eV with a shoulder at a 532.2-eV binding energy. The O ls structure at binding energies near 530.0 eV was shown for a sample of 5 wt% $CoO_x/TiO_2$, irrespective to calcination temperature. The noticeable difference between the catalyst calcined at 450 and $570^{\circ}C$ is the 532.2 eV shoulder which was indicative of the formation of the $Co_nTiO_{n+2}$ compounds in the catalyst. No long-life activity maintenance of the synthetic $Co_nTiO_{n+2}$ compounds for CO oxidation at $100^{\circ}C$ was a good vehicle to strongly sup port the reason why the supported $CoO_x$ catalyst after calcination at $570^{\circ}C$ had been practically inactive for the oxidation reaction in our previous study; consequently, the earlier proposed model for the $CO_3O_4$ nanoparticles existing with the catalyst following calcination at different temperatures is very consistent with the characterization results and activity measurements with the cobalt titanates.

• 한국안광학회지
• /
• 제10권3호
• /
• pp.185-191
• /
• 2005

Ti-naphthenate를 출발물질로 사용하여 스핀코팅으로 soda-lime-silica 유리에 $TiO_2$ 박막을 제조하였다. $500^{\circ}C$에서 $600^{\circ}C$의 열처리온도에 따라 제조된 악악의 광학적, 구조적 및 광촉매 특성을 측정하였다. 재조된 $TiO_2$박막의 투과율은 가시광선 영역에서 약 80%정도의 평균투과율을 보였고, 열처리 온도가 높아짐에 따라 흡수밴드가 낮은 UV 파장영역으로 편향하였으며, 전체 광투과율은 소폭 감소하는 경향을 나타냈다. $TiO_2$ 박막의 열처리 온도가 높아짐에 따라 굴절률은 2.16에서 2.63으로 증가하였고, 박막의 두께는 484nm에서 439nm으로 감소하였다. $500^{\circ}C$에서 $600^{\circ}C$의 모든 열처리 온도에서 anatase 결정상을 보였으며, 표면조도는 $500^{\circ}C$와 $550^{\circ}C$에서 열처리한 박막에 비하여 $600^{\circ}C$에서 크게 증가하였다. 또한 제조된 $TiO_2$ 박막의 광촉매 특성에 있어서 초기 접촉각은 $600^{\circ}C$의 경우 가장 낮은 값을 보였으며, $550^{\circ}C$와 $500^{\circ}C$로 열처리한 경우 UV광자극에 의해 45분 이내에 친수성박막으로 변이하였고 UVC-UVA-UVB 순으로, $600^{\circ}C$ 의 경우에는 UVA-UVC-UVB의 순으로 높은 광활성을 보였다.

• 한국분말재료학회지
• /
• 제29권1호
• /
• pp.28-33
• /
• 2022

Aluminum-based powders have attracted attention as key materials for 3D printing owing to their low density, high specific strength, high corrosion resistance, and formability. This study describes the effects of TiC addition on the microstructure of the A6013 alloy. The alloy powder was successfully prepared by gas atomization and further densified using an extrusion process. We have carried out energy dispersive X-ray spectrometry (EDS) and electron backscatter diffraction (EBSD) using scanning electron microscopy (SEM) in order to investigate the effect of TiC addition on the microstructure and texture evolution of the A6013 alloy. The atomized A6013-xTiC alloy powder is fine and spherical, with an initial powder size distribution of approximately 73 ㎛ which decreases to 12.5, 13.9, 10.8, and 10.0 ㎛ with increments in the amount of TiC.

• 한국전기전자재료학회논문지
• /
• 제29권12호
• /
• pp.809-813
• /
• 2016

We investigated a SiC-based hydrogen gas sensor with MIS (metal-insulator-semiconductor) structure for high temperature applications. The sensor was fabricated by $Pd/TiO_2/SiC$ structure, and a thin titanium dioxide ($TiO_2$) layer was exploited for sensitivity improvement. In the experiment, dependences of I-V characteristics and capacitance response properties on hydrogen gas concentrations from 0 to 2,000 ppm were analyzed at room temperature to $400^{\circ}C$. As the result, our sensor using $TiO_2$ dielectric layer showed possibilities with regard to use in hydrogen gas sensors for high-temperature applications.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.7-10
• /
• 2005

[ $TiO_{2}-ZrO_{2}$ ] powders were successfully synthesized by the sol-gel process using titanium iso-propoxide as a precursor. The amorphous $TiO_{2}$ particles, 70 nm in size, homogenously adhered to the surface of $ZrO_{2}$ the powders. After calcination at $450^{circ}C$, most of the $TiO_{2}$ powders appeared as an anatase type, whereas they changed to a rutile phase at $750^{circ}C$. For comparison of photocata­lytic activity, $TiO_{2}-ZrO_{2}$ nano-sized powders calcined at $450^{circ}C,\;600^{circ}C,\;and\;750^{circ}C$ were used. In the $TiO_{2}-20wt\%$ $ZrO_{2}$ powders cal­cined at $450^{circ}C$, there was excellent removal efficiency of Methyl Orange (MO). For the calcination temperature increased, $TiO_{2}­ZrO_{2}$ nano-sized powders increased $ZrO_{2}$ contents showed the good photoactivity for the photooxidation of MO.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.454-456
• /
• 2014

ferroelectric perovskite의 ferroelectricity를 유지하기 위해서는 oxygen vacancy를 조절해야 한다. BTO의 경우 Ti-O(vacancy site)-Ti의 align 방향에 따라 두 종류의 vacancy가 존재하는데, Ti-O-Ti가 c-axis와 평행한 경우 BTO의 ferroelectricity가 약해진다. 본 연구에서는 BTO에 ab-biaxial strain을 가해 보고, 그 결과 두 종류의 vacancy formation energy가 어떻게 변화하는지 확인하였다. 그 결과 a, b-axis의 격자 상수가 증가하면 $V_b$가 $V_c$에 비해 안정해진다는 사실을 확인하였다. 이는 BTO의 oxygen vacancy의 vacancy site에 vacancy로 인해 남는 전자가 국지화되어 Ti-vacancy site 간 인력과 Ti-Ti간 반발력이 균형을 이룰 때 vacancy의 에너지가 낮아지기 때문이다.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1301-1310
• /
• 1996

Generally it requires high sintering temperatures more than 135$0^{\circ}C$ to make semiconductive BaTiO3 ceramics. Also it is very difficult to achieve a homogeneous mixing in solid-state reaction method. Therefore the liquid phase distributed to non-uniform dilute the characteristics of PTCR. In order to improve the uniformity this study is used the sol-gel coating method. Using this method we studied the new manufacturing process that had a high reproducibility and mass production capability. Tetraethyl orthosilicate (TEOS) was used as a source of Si. The semiconductive BaTiO3 ceramics which was produced by sol-gel method for the SiO2 addition and sintered between 124$0^{\circ}C$ and 130$0^{\circ}C$ showed almost same resistivity at room temperature among 125$0^{\circ}C$ and 130$0^{\circ}C$. As the results We could be sintered the semiconducting BaTiO3 ceramics at lower temperature even at 125$0^{\circ}C$ maintaining the same specific resistivity ratio ($\rho$max/$\rho$min) at 130$0^{\circ}C$. The specific resistivity both below and above the Curie temperature were increased by slow cooling and the steepness of the plots in the reasion of transition from low to high resistance increased as the cooling rate decreased.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.1001-1004
• /
• 2011

The formation of TiC and $Al_2O_3$ particles based on the self-combustion reaction of the $Al-TiO_2-C-CuO$ system in an Al alloy melt was investigated. With an adequate amount of CuO in the system, a spontaneous reaction occurred within the Al alloy melt at $850^{\circ}C$ and thereafter was self-maintained, producing an Al matrix composite reinforced with thermodynamically stable TiC and $Al_2O_3$ particles. TiC and $Al_2O_3$ particles contributed to a considerable increase in the strength and stiffness, demonstrating the feasibility of this method as a practical application for structural parts.