• Journal of Sensor Science and Technology
• /
• v.20 no.1
• /
• pp.64-69
• /
• 2011

Porous manganese oxide porous nanostructures were prepared by amino-acid-mediated solvothermal self assembly reaction and subsequent heat treatment at $600^{\circ}C$. When Mn-precursors were heat-treated at $400-550^{\circ}C$, the sensors did not show significant gas responses. In contrast, the manganese oxide heat-treated at $600^{\circ}C$ showed the significant gas responses, that is, the resistance decrease to 100 ppm $C_3H_8$ ($R_a/R_g$ = 2.17, $R_a$ : resistance in air, $R_g$ : resistance in gas) and the resistance increase to 100 ppm $C_2H_5OH$ ($R_g/R_a$ = 1.92). The opposite change of resistance upon exposure to $C_3H_8$ and $C_2H_5OH$ was discussed in relation to the mixed phases of manganese oxides with different valences.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.267-271
• /
• 1974

The tetradentate schiff base, N,N'-bis(salicylaldehyde)-ethylene diimine has been reacted with a series of Mo(IV), Mo(V), Mo(IV), and Mo(III) oxidation states to form new Complexes; $[MoO_2(C_{16}H_{14}O_2N_2)], (MoO(C_{16}H_{14}O_2N_2)]_2O, (Mo(SCN)(C_{16}H_{14}O_2N_2)]_2O, and (Mo(H_2O)(C_{16}H_{14}O_2N_2)]_2O.$ These complexes have hexa coordinated configurations and the mole ratio of these ions to the ligand was 1:1. These complexes have been identified by visible spectra, infrared specra, T.G.A., D.T.A., and elemental analysis.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.169-173
• /
• 1973

The tridentate schiff base ligand, salicyliden amino-o-hydroxy benzene, has derived from salicylaldehyde and o-amino phenol. This ligand reacts with a series of Mo (VI), Mo (V), Mo (IV), and Mo (III) oxidated states and forms a new complexes; [Mo O$_2(H_2O)\;(C_{13}H_9O_2N)]$, [MoO Cl$(H_2O)\;(C_{13}H_9O_2N)]$, [Mo(SCN)$_2(H_2O)\;(C_{13}H_9O2_N)]$ 및 $[Mo(H_2O)_2\;(C_{13}H_9O_2N)]_2O$. The Mo (VI), Mo(V) and Mo(Ⅳ) ions in these complexes are octahedron, hexa coordinate, and the mole ratio of these ions to the ligand are 1 : 1, but Mo (III) Complex is a Mo-O-Mo oxygen bridge bond and polynuclear, and the mole ratio of Mo (III) to the ligand 1 : 1 above facts are identified from the data of Infrared spectra, visible spectra, and elemental analysis.

• Korean Journal of Metals and Materials
• /
• v.46 no.11
• /
• pp.762-769
• /
• 2008

Hydrogenated amorphous silicon(a-Si : H) layers, 120 nm and 50 nm in thickness, were deposited on 200 $nm-SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by E-beam evaporation. Finally, 30 nm-Ni/120 nm a-Si : H/200 $nm-SiO_2$/single-Si and 30 nm-Ni/50 nm a-Si:H/200 $nm-SiO_2$/single-Si were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 30 minute. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide on the 120 nm a-Si:H substrate showed high sheet resistance($470{\Omega}/{\Box}$) at T(temperature) < $450^{\circ}C$ and low sheet resistance ($70{\Omega}/{\Box}$) at T > $450^{\circ}C$. The high and low resistive regions contained ${\zeta}-Ni_2Si$ and NiSi, respectively. In case of microstructure showed mixed phase of nickel silicide and a-Si:H on the residual a-Si:H layer at T < $450^{\circ}C$ but no mixed phase and a residual a-Si:H layer at T > $450^{\circ}C$. The surface roughness matched the phase transformation according to the silicidation temperature. The nickel silicide on the 50 nm a-Si:H substrate had high sheet resistance(${\sim}1k{\Omega}/{\Box}$) at T < $400^{\circ}C$ and low sheet resistance ($100{\Omega}/{\Box}$) at T > $400^{\circ}C$. This was attributed to the formation of ${\delta}-Ni_2Si$ at T > $400^{\circ}C$ regardless of the siliciation temperature. An examination of the microstructure showed a region of nickel silicide at T < $400^{\circ}C$ that consisted of a mixed phase of nickel silicide and a-Si:H without a residual a-Si:H layer. The region at T > $400^{\circ}C$ showed crystalline nickel silicide without a mixed phase. The surface roughness remained constant regardless of the silicidation temperature. Our results suggest that a 50 nm a-Si:H nickel silicide layer is advantageous of the active layer of a thin film transistor(TFT) when applying a nano-thick layer with a constant sheet resistance, surface roughness, and ${\delta}-Ni_2Si$ temperatures > $400^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.131-137
• /
• 1986

Cutting oil cools the chip and a tool as well as lubricates the chip-tool interface, the flank and machined surface. Rehbinder effect has been known as a phenomenon, the reduction of mechanical strength, when the metal is exposed to a polar organic environment or the surface of metal is coated with some polar organic substances. About the cause of Rehbinder effect there have been many different ideas by Rehbinder, Shaw, Barlow, Sakida and etc. In this report, the efect of polar organic substance( $C_{6}$ $H_{5}$C $H_{3}$+ $C_{6}$ $H_{4}$(C $H_{3}$)$_{2}$+ $C_{4}$ $H_{9}$OH+ $C_{6}$ $H_{12}$ $O_{2}$) (magic ink) upon the mechanism of chip formation on the orthogonal cutting of copper and mechanical properties of the work material are experimentally discussed with various rake angles. As expected no lubrication action could be noticed, but the shear angle increased and the cutting force and shear strain on the shear plane decreased, therefore the work material must be embrittled under polar organic substance.substance.

• Journal of The Korean Astronomical Society
• /
• v.26 no.1
• /
• pp.73-78
• /
• 1993

We have mapped the $C_3H_2\;2_{12}-1_{01}$ transition line toward the Sgr A molecular cloud on a 1' grid spacing and derived $C_3H_2$ column densities of $3\~7\times10^{14}\;cm^{-2}$ for molecular clouds of Sgr A. The fractional abundances of $C_3H_2$ relative to $H_2$ are obtained to be $3\~6\times10^{-9}$, which are slightly lower than that for the cold dark cloud TMC-1 but are enhanced by factors of 5-60 compared to those for Sgr B2 and the Orion extended ridge. We also estimate from the $C_3H_2$ column densities total masses of $\~10^6\; M_\bigodot$ for two clouds (M - 0.13 - 0.08 and M - 0.02 - 0.07), which are thought to be close to the virial equilibrium. We suggest that the large abundance of $C_3H_2$ in Sgr A may be partly due to the activities of the Galactic center.

• Communications of the Korean Mathematical Society
• /
• v.9 no.4
• /
• pp.831-836
• /
• 1994

In this paper we characterize the quasiaffine transforms of quasisubscalar operators. Let H and K be separable, complex Hilbert spaces and L(H,K) denote the space of all linear, bounded operators from H to K. If H = K, we write L(H) in place of L(H,K). A linear bounded operators S on H is called scalar of order m if there is a continuous unital morphism of topological algebras $$ \Phi : C^m_0(C) \to L(H) $$ such that $\Phi(z) = S$, where as usual z stands for identity function on C, and $C^m_0(C)$ stands for the space of compactly supproted functions on C, continuously differentiable of order m, $0 \leq m \leq \infty$.

• Korean journal of food and cookery science
• /
• v.13 no.3
• /
• pp.272-277
• /
• 1997

To evaluate the quality of commercial anchovy sauces, 8 varieties (2 products from the Fishery Cooperation, 2 from small companies, and 4 well-known brands) were chosen and their physicochemical and sensory properties were examined. The salinity of anchovy sauces ranged from 19.8％ to 26%, where product E was the saltiest and followed by F> H > B > E > A> C = G > D. Product D with the least salinity was turbid, rancid, and high in ammonia content, suggesting that it is difficult to control the quality of anchovy source with a low salt content. Protein content of anchovy sauces ranged from 2.51％ to 2.64%. The unit price of anchovy source A was the highest, whereas B was the lowest. Sensory evaluation scores of anchovy sauces were in the order of B > G > A > F > E > C > H > D for color, B > G = C > H > E = F > G > D for odor, E > C > F > G > H > D > B > A for saltiness, and B > A > C > H > E = F > G > D for overall acceptability. Above results suggest that product B was the best in quality as well as the cheapest among all. Based on the above results, kimchies were prepared with product A, B, C with a high sensory quality and product H with a high market occupancy, and sensory evaluation was performed. The kimchi with product C got the highest sensory score in appearance and the one with product A and H in odor. Although the kimchi with product A generally had high scores throughout the fermentation period, there were no significant differences in texture, salty taste, and overall acceptability among kimchies with different varieties of anchovy sauces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1043-1046
• /
• 2003

We investigated the EO performances of the UV aligned twisted nematic liquid crystal display (TN-LCD) with the UV exposure on a-C:H thin film surface. LC alignment using UV exposure on the a-C:H thin film surface was achieved. Monodomain alignment of the UV aligned TN-LCD can be observed. An good EO characteristics of the UV aligned TN-LCD was observed with oblique ion beam exposure on the a-C:H thin film surface. Therefore, the EO property of the UV-aligned TN-LCD with UV exposure on the a-C:H thin film surface is almost the same as that of the rubbing-aligned TN-LCD on a polyimide (PI) surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.469-472
• /
• 2003

The nematic liquid crystal (NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of about $11^{\circ}$ by the ion beam alignment method was observed on the a-C:H thin film (polymer-like carbon) deposited at 1W rf bias condition, and the low pretilt angle of the NLC was observed on the a-C:H thin film(diamond-like carbon) deposited at rf 30W and 60W bias condition. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1W rf bisa condition can be achieved.