• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2040-2043
• /
• 2003

General-purpose MPEG-2 video transcoders must be able to achieve any conversion between 18 ATSC (Advanced television system committee) video formats for DTV (digital television), e.g., scan format, size format, and frame rate format conversion. Especially, scan format conversion is hard to implement because frame rate and size format conversion often happen together. This paper proposes a fast motion estimation(ME) algorithm for MPEG-2 video transcoding supporting scan format conversion. Firstly, we extract and compose a set of candidate motion vectors (MV's) from the input bit-stream to comply with the re-encoding format. Secondly, the best MV is chosen among several candidate MV's by using a weighted median selector. Simulation results show that the proposed ME algorithm reduces significantly transcoding complexity with a minor PSNR degradation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2023-2030
• /
• 2010

In this paper, we present research results of developing high performance scan conversion unit and implementing it on FPGA chip. To increase performance of scan conversion unit, we propose an architecture of scan converter that is a SIMD architecture and uses tile-based traversing method. The proposed scan conversion unit can operate about 124Mhz clock frequency on Xilinx Vertex4 LX100 device. To verify the scan conversion unit, we also develop shader unit, texture mapping unit and $240{\times}320$ color TFT-LCD controller to display outputs of the scan conversion unit on TFT-LCD. Because the scan conversion unit implemented on FPGA has 311Mpixels/sec pixel rate, it is applicable to desktop pc's 3d graphics system as well as mobile 3d graphics system needing high pixel rates.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.71-74
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats into a target format. Circuits for the conversion have been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL on Max+PlusII and implemented with an FPGA chip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation.

• Journal of the Korea Society for Simulation
• /
• v.9 no.4
• /
• pp.11-23
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats into a target format. Circuits for the conversion have been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL, simulated on Max+plus Ⅱ , and implemented with an FPGA chip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation techniques according to simulation results and implementation.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.04a
• /
• pp.91-95
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats to a target format. Circuits for the conversion has been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL on Max+Plus II and implemented with an FPGA cpip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.288-296
• /
• 2003

ATSC (Advanced Television System Committee) has specified 18 video formats for DTV (Digital Television), e.g., scan format, size format, and frame rate format conversion. Effective MPEG-2 video transcoders should support any conversion between the above-mentioned formats. Scan format conversion Is hard to Implement because it may often induce frame rate and size format conversion together. Especially. because of picture type conversion caused by scan format conversion, the computational burden of motion estimation (ME) in transcoding becomes serious. This paper proposes a fast ME algorithm for MPEG-2 video transcoding supporting scan format conversion. Firstly, we extract and compose a set of candidate motion vectors (MVs) from the input bit-stream to comply with the re-encoding format. Secondly, the best MV is chosen among several candidate MVs by using a weighted median selector. Simulation results show that the proposed ME algorithm provides outstanding PSNR performance close to full search ME, while reducing the transcoding complexity significantly.

• Korean Journal of Veterinary Service
• /
• v.45 no.1
• /
• pp.39-45
• /
• 2022

The total bacteria count is significantly important factor for hygienic quality in raw milk. BactoScan FM^TM and BactoCount IBC^TM are the automated instruments for the determination of the total bacterial count in raw milk. They have been used after calibration by standard plate count (SPC) method in South Korea since 2000. It is necessary to re-evaluate for total bacterial counter according to the improvement of milk quality and the change of milk quality grade. Therefore, this study was evaluated the conversion mode of the two machines by SPC method. We collected 921 bulk-tank milk samples throughout the concentration range of 1,000~1,000,000 CFU/mL from June 2020 to October 2021. As a result, when compared by the SPC value, there was a slight difference in total bacterial count in BactoScan below 10,000 CFU/mL and above 200,000 CFU/mL and in BactoCount above 100,000 CFU/mL, respectively. Therefore, the conversion factor for BactoScan and the conversion equation for BactoCount were newly adjusted based on SPC value, and then the correlation coefficients (R²) was 0.85 or higher. In addition, the correlation (R²) between BactoScan and BactoCount was 0.91, which means the results were high positive correlation. These results are expected to contribute to improving the accuracy of the automated instruments for determining of total bacterial count in raw milk.

• Journal of Biomedical Engineering Research
• /
• v.22 no.4
• /
• pp.339-347
• /
• 2001

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1880-1883
• /
• 1997

An Parallax-Barrier type autostereoscopic display system is implemented to overcome the handicap of current glass-typed stereo imaging system which gives operators unnatural feeling and reluctance. This system is composed of image mixing part of two input images, A/D transformation part, scan conversion part to eliminate the rainbow interference phenomenon, and pin-hole type barrier lens. For the fine display the accurate slit width of barrier is calculated in consideration of retina size, and the samsung 10.4" TFT-LCO was used as flat display monitor.itor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.942-946
• /
• 2009

A scan order converter has to be placed before the JPEG encoder to provide $8{\times}8$ blocks from the pixels in raster scan order. Recently a hardware architecture has been proposed to implement a scan converter based on the single line memory. Since both read and write accesses happen at each cycle, however, the largest part of the entire power budget is occupied by the SRAM itself. In this paper, the data packing and unpacking procedure is inserted in the processing chain, such that the access frequency to the SRAM is reduced to 1/8 by adopting a packed larger data unit. The simulation results show that the resultant power consumption is reduced down to 16% for the SXGA resolution.